component
CKS32F030F4P6TR
Public Made by Adomby adom
CKS Microcontroller Units (MCUs/MPUs/SOCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCKS32F030F4P6TR
CKS · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
CKS32F030F4P6TR from CKS, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT0 | input | Dedicated boot memory selection input that must be pulled high or low externally and not left floating; input range 0 to 5.5 V. |
| 2 | PF0/OSC_IN | bidirectional | 5 V-tolerant (FT) I/O that is the HSE 4-32 MHz oscillator input (OSC_IN), floating input after reset. |
| 3 | PF1/OSC_OUT | bidirectional | 5 V-tolerant (FT) I/O that is the HSE 4-32 MHz oscillator output (OSC_OUT), floating input after reset. |
| 4 | NRST | bidirectional | Active-low device reset input / internal reset output with a weak pull-up (25-55 kΩ). |
| 5 | VDDA | power_in | Analog supply of 2.4 to 3.6 V for ADC, reset block, RC oscillators and PLL; must be greater than or equal to VDD. |
| 6 | PA0 | bidirectional | TTa I/O with USART1_CTS alternate function and ADC_IN0, RTC_TAMP2, WKUP1 additional functions. |
| 7 | PA1 | bidirectional | TTa I/O with USART1_RTS and EVENTOUT alternate functions and ADC_IN1 additional function. |
| 8 | PA2 | bidirectional | TTa I/O with USART1_TX alternate function and ADC_IN2 additional function. |
| 9 | PA3 | bidirectional | TTa I/O with USART1_RX alternate function and ADC_IN3 additional function. |
| 10 | PA4 | bidirectional | TTa I/O with SPI1_NSS, USART1_CK, TIM14_CH1 alternate functions and ADC_IN4 additional function. |
| 11 | PA5 | bidirectional | TTa I/O with SPI1_SCK alternate function and ADC_IN5 additional function. |
| 12 | PA6 | bidirectional | TTa I/O with SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, EVENTOUT alternate functions and ADC_IN6 additional function. |
| 13 | PA7 | bidirectional | TTa I/O with SPI1_MOSI, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, EVENTOUT alternate functions and ADC_IN7 additional function. |
| 14 | PB1 | bidirectional | TTa I/O with TIM3_CH4, TIM14_CH1, TIM1_CH3N alternate functions and ADC_IN9 additional function. |
| 15 | VSS | power_in | Digital ground. |
| 16 | VDD | power_in | Digital supply of 2.4 to 3.6 V for I/O and the internal voltage regulator. |
| 17 | PA9 | bidirectional | 5 V-tolerant (FT) I/O with USART1_TX, TIM1_CH2 and I2C1_SCL alternate functions. |
| 18 | PA10 | bidirectional | 5 V-tolerant (FT) I/O with USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA alternate functions. |
| 19 | PA13 | bidirectional | 5 V-tolerant (FT) I/O that is SWDIO after reset (internal pull-up enabled), also IR_OUT alternate function. |
| 20 | PA14 | bidirectional | 5 V-tolerant (FT) I/O that is SWCLK after reset (internal pull-down enabled), with USART1_TX alternate function. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CKS |
| Package | TSSOP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
CKS32F030F4P6TR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
cks32f030f4p6tr-etched.step/cks32f030f4p6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cks32f030f4p6tr.step/cks32f030f4p6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CKS datasheet (78 pp, sha256
719ccdac6b1ec804, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).