component
TLV3201AQDCKRQ1
Public Made by Adomby adom
Texas Instruments Comparators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV3201AQDCKRQ1
Texas Instruments · Comparators · SC-70-5
TLV3201AQDCKRQ1 from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull comparator output (TLV3201-Q1 has a push-pull output stage). |
| 2 | GND | power_in | Negative supply, ground; the device operates from 2.7 V to 5.5 V supply (VS = VS+ − VS−). |
| 3 | IN+ | input | Positive comparator input; the common-mode range extends to 200 mV above either supply rail. |
| 4 | IN- | input | Negative comparator input; input pins are diode-clamped to the supply rails, and signals beyond 0.5 V outside the rails must be current-limited to 10 mA or less. |
| 5 | VCC | power_in | Positive supply; recommended supply range is 2.7 V to 5.5 V, with an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 7 | V | 4 | ||||
| Signal input pins voltage | -0.5 | V | 4 | ||||
| Signal input pins current | -10 | 10 | mA | 4 | |||
| Output short circuit current | 100 | mA | Short-circuit to ground | 4 | |||
| Operating temperature | -55 | 125 | °C | Operating | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage VS = (VS+), (VS-) | VS | 2.7 | 5.5 | V | VS = (VS+), (VS-) | 4 | |
| Specified temperature | TA | -40 | 125 | °C | 4 | ||
| Input offset voltage | VIO | 1 | 5 | mV | VCC = 5 V; VCM = VCC / 2 | 5 | |
| Input offset voltage over temperature | VIO | 6 | mV | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Input offset voltage drift | dVOS/dT | 1 | 10 | µV/°C | VCC = 5 V; TA = -40°C to 125°C | 5 | |
| Power-supply rejection ratio | PSRR | 65 | 85 | dB | VCM = VCC / 2, VCC = 2.5 V to 5.5 V | 5 | |
| Input bias current | IIB | 1 | 50 | pA | VCC = 5 V; VCM = VCC / 2 | 5 | |
| Input bias current over temperature | IIB | 5 | nA | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Input offset current | IIO | 1 | 50 | pA | VCC = 5 V; VCM = VCC / 2 | 5 | |
| Input offset current over temperature | IIO | 2.5 | nA | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Common-mode rejection ratio | CMRR | 60 | 70 | dB | VCC = 5 V; -0.2 V < VCM < 5.2 V | 5 | |
| Voltage output swing from lower rail | VOL | 175 | 190 | mV | VCC = 5 V; ISINK = 4 mA | 5 | |
| Voltage output swing from lower rail over temperature | VOL | 225 | mV | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Voltage output swing from upper rail | VOH | 120 | 140 | mV | VCC = 5 V; ISOURCE = 4 mA | 5 | |
| Voltage output swing from upper rail over temperature | VOH | 170 | mV | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Short-circuit current sinking (per comparator) | ISC | 40 | 48 | mA | VCC = 5 V; ISC sinking | 5 | |
| Short-circuit current sourcing (per comparator) | ISC | 52 | 60 | mA | VCC = 5 V; ISC sourcing | 5 | |
| Specified supply voltage | VCC | 2.7 | 5.5 | V | VCC = 5 V table | 5 | |
| Quiescent current | IQ | 40 | 50 | µA | VCC = 5 V; TA = 25°C | 5 | |
| Quiescent current over temperature | IQ | 65 | µA | VCC = 5 V; TA = -40°C to 125°C | 5 | ||
| Input offset voltage | VIO | 1 | 5 | mV | VCC = 2.7 V; VCM = VCC / 2 | 6 | |
| Common-mode rejection ratio | CMRR | 56 | 68 | dB | VCC = 2.7 V; -0.2 V < VCM < 2.9 V | 5 | |
| Voltage output swing from lower rail | VOL | 230 | 260 | mV | VCC = 2.7 V; ISINK = 4 mA | 6 | |
| Voltage output swing from lower rail over temperature | VOL | 325 | mV | VCC = 2.7 V; TA = -40°C to 125°C | 6 | ||
| Voltage output swing from upper rail | VOH | 210 | 250 | mV | VCC = 2.7 V; ISOURCE = 4 mA | 6 | |
| Voltage output swing from upper rail over temperature | VOH | 350 | mV | VCC = 2.7 V; TA = -40°C to 125°C | 6 | ||
| Short-circuit current sinking (per comparator) | ISC | 13 | 19 | mA | VCC = 2.7 V; ISC sinking | 6 | |
| Short-circuit current sourcing (per comparator) | ISC | 15 | 21 | mA | VCC = 2.7 V; ISC sourcing | 6 | |
| Specified supply voltage | VCC | 2.7 | 5.5 | V | VCC = 2.7 V table | 6 | |
| Quiescent current | IQ | 36 | 46 | µA | VCC = 2.7 V; TA = 25°C | 6 | |
| Quiescent current over temperature | IQ | 60 | µA | VCC = 2.7 V; TA = -40°C to 125°C | 6 | ||
| Propagation delay time, low to high | tPD | 47 | 50 | ns | Input overdrive = 20 mV, CL = 15 pF | 6 | |
| Propagation delay time, low to high | tPD | 42 | 50 | ns | Input overdrive = 100 mV, CL = 15 pF | 6 | |
| Propagation delay time, low to high over temperature | tPD | 55 | ns | TA = -40°C to 125°C | 6 | ||
| Propagation delay time, high to low | tPD | 40 | 50 | ns | Input overdrive = 20 mV, CL = 15 pF | 6 | |
| Propagation delay time, high to low | tPD | 38 | 50 | ns | Input overdrive = 100 mV, CL = 15 pF | 6 | |
| Propagation delay time, high to low over temperature | tPD | 55 | ns | TA = -40°C to 125°C | 6 | ||
| Input hysteresis (VCC = 5 V table) | 1.2 | mV | 5 | ||||
| Input hysteresis (VCC = 2.7 V table) | 1.2 | mV | 5 | ||||
| Propagation delay skew | 2 | ns | Input overdrive = 20 mV, CL = 15 pF | 6 | |||
| Rise time | tR | 2.9 | ns | 10% to 90% | 6 | ||
| Fall time | tF | 3.7 | ns | 10% to 90% | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 281.9 | °C/W | DCK (SC-70), 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 97.6 | °C/W | DCK (SC-70), 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 68.3 | °C/W | DCK (SC-70), 5 pins | 4 |
CAD (KiCad official)
- Symbol:
TLV3201AQDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tlv3201aqdckrq1-etched.step/tlv3201aqdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv3201aqdckrq1.step/tlv3201aqdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
6b0462fb84a12359, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).