Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

0603WAF5492T5E

UNI-ROYAL(Uniroyal Elec) · Chip Resistor - Surface Mount · 0603

0603WAF5492T5E from UNI-ROYAL(Uniroyal Elec), in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of a thick film chip resistor (54.9 kOhm ±1 %, 1/10 W, 0603); unpolarised, either orientation.
2 2 passive Terminal 2 of a thick film chip resistor (54.9 kOhm ±1 %, 1/10 W, 0603); unpolarised, either orientation.

Key specifications

Parameter Value
Manufacturer UNI-ROYAL(Uniroyal Elec)
Package 0603
Category Resistors
Pins 2

Electrical characteristics

Limits from the LCSC catalog entry for this part (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resistance 54.9 kΩ nominal, catalog attribute (LCSC C23077) catalog
Tolerance -1 1 % catalog attribute (LCSC C23077) catalog
Rated power 100 mW catalog attribute (LCSC C23077) catalog
Temperature coefficient TCR -100 100 ppm/°C catalog description (LCSC C23077) catalog
Operating temperature -55 155 °C catalog description (LCSC C23077) catalog

CAD (Adom-generated)

  • Symbol: 0603WAF5492T5E
  • Footprint: Adom_Gen:UNI-ROYAL_Uniroyal_Elec__0603_8c6b04
  • 3D model: generated to fit the land (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UNI-ROYAL(Uniroyal Elec) datasheet (9 pp, sha256 11cd644d5d8a34a6, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Uniroyal '8. Recommend the size of welding plate' (p.5), 0603: A 0.9±0.05 (gap between pads), B 0.65±0.05 (pad length), C 0.8±0.05 (pad width), D 2.1±0.05 (overall); letters fixed by the drawing. The nominals do not close (0.9 + 2 x 0.65 = 2.2 vs D 2.1), so gap A 0.90 and overall D 2.10 are kept and B = 0.60, the low end of its printed 0.65±0.05: every printed value is within its tolerance. Pads 0.60 x 0.80 at x +/-0.75.

Datasheet PDF