Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MP2359DT-LF-Z

Monolithic Power Systems · DC-DC Converters · SOT-23-6

MP2359DT-LF-Z from Monolithic Power Systems, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST passive Bootstrap pin: a capacitor connected between SW and BS forms a floating supply across the power switch driver and is needed to drive the power switch gate above the supply voltage.
2 GND power_in Ground is the voltage reference for the regulated output and must be laid out outside the D1 to C1 ground path to prevent switching current spikes from inducing voltage noise.
3 FB input Feedback input: an external resistor divider from the output to GND sets the output voltage, and the frequency foldback comparator lowers the oscillator frequency when FB is below 250mV.
4 EN input On/off control input: pull EN above 1.2V to turn the device on, and a 100kΩ resistor between EN and the IN pin gives automatic enable.
5 IN power_in Supply voltage input operating from an unregulated +4.5V to +24V, with C1 needed to prevent large voltage spikes at the input.
6 SW output Switch output pin, which the datasheet describes only as the switch output.

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package SOT-23-6
Category Power Management
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage VFB 0.79 0.81 0.83 V 4.5V ≤ VIN ≤ 24V 3
Oscillator Frequency fSW 1.2 1.4 1.7 MHz VFB = 0.6V 3
Under Voltage Lockout Threshold Rising 2.5 2.8 3.1 V Rising 3
Supply Current (Quiescent) IQ 0.8 1 mA VEN = 2V, VFB = 1V 3
Supply Current (Shutdown) IS 0.1 1 μA VEN = 0V 3
Feedback Current IFB 0.1 μA VFB = 0.8V 3
Switch-On Resistance RDS(ON) 0.35 Ω 3
Switch Leakage 10 μA VEN = 0V, VSW = 0V 3
Current Limit 1.8 A 3
Fold-back Frequency 460 kHz VFB = 0V 3
Maximum Duty Cycle 87 % VFB = 0.6V 3
Minimum On-Time tON 100 ns 3
Under Voltage Lockout Threshold Hysteresis 150 mV 3
EN Input Low Voltage 0.4 V 3
EN Input High Voltage 1.2 V 3
EN Input Current (high) 2.1 μA VEN = 2V 3
EN Input Current (low) 0.1 μA VEN = 0V 3
Thermal Shutdown 150 °C 3
Supply Voltage VIN (absolute maximum) VIN 26 V 2
VSW (absolute maximum) VSW 27 V 2
All other pins voltage -0.3 6 V 2
Continuous Power Dissipation (SOT23-6) PD 0.568 W TA = +25°C 2
Junction Temperature TJ 150 °C 2
Storage Temperature TSTG -65 150 °C 2
Supply Voltage VIN (recommended) VIN 4.5 24 V 2
Output Voltage VOUT (recommended) VOUT 0.81 15 V 2
Ambient Temperature (recommended) TA -40 85 °C 2
Max input current into the EN pin 300 μA 2
Thermal Resistance Junction-to-Ambient (SOT23-6) θJA 220 °C/W JESD51-7, 4-layer PCB 2
Thermal Resistance Junction-to-Case (SOT23-6) θJC 110 °C/W 2

CAD (KiCad official)

  • Symbol: MP2359DT-LF-Z
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mp2359dt-lf-z-etched.step / mp2359dt-lf-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp2359dt-lf-z.step / mp2359dt-lf-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (11 pp, sha256 faf7e8160f22b7be, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF