3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKL03Z16VFG4
NXP Semicon · Pre-ordered MCUs · QFN-16-EP(3x3)
MKL03Z16VFG4 from NXP Semicon, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin; the device operates over a voltage range of 1.71 to 3.6 V. |
| 2 | VSS | power_in | Ground pin for the device supply. |
| 3 | PTA3 | bidirectional | General-purpose I/O port A bit 3, with alternate functions EXTAL0, I2C0_SCL, I2C0_SDA, and LPUART0_TX. |
| 4 | PTA4 | bidirectional | General-purpose I/O port A bit 4, with alternate functions XTAL0, I2C0_SDA, I2C0_SCL, LPUART0_RX, and CLKOUT. |
| 5 | PTA5/RTC_CLK_IN | bidirectional | General-purpose I/O port A bit 5, which also serves as the RTC clock input (RTC_CLK_IN), with alternate functions TPM0_CH1 and SPI0_SS_b. |
| 6 | PTA6 | bidirectional | General-purpose I/O port A bit 6, with alternate functions TPM0_CH0 and SPI0_MISO. |
| 7 | PTA7/IRQ_4 | bidirectional | General-purpose I/O port A bit 7 with external interrupt IRQ_4, with alternate functions SPI0_MISO and SPI0_MOSI. |
| 8 | PTB0/IRQ_5/LLWU_P4 | bidirectional | General-purpose I/O port B bit 0 with external interrupt IRQ_5 and low-leakage wakeup input LLWU_P4, with alternate functions ADC0_SE9, EXTRG_IN, SPI0_SCK, and I2C0_SCL. |
| 9 | PTB1/IRQ_6 | bidirectional | General-purpose I/O port B bit 1 with external interrupt IRQ_6, with alternate functions ADC0_SE8/CMP0_IN3, LPUART0_TX, LPUART0_RX, and I2C0_SDA. |
| 10 | PTB2/IRQ_7 | bidirectional | General-purpose I/O port B bit 2 with external interrupt IRQ_7, with alternate functions VREF_OUT/CMP0_IN5, LPUART0_RX, and LPUART0_TX. |
| 11 | PTB3/IRQ_10 | bidirectional | General-purpose I/O port B bit 3 with external interrupt IRQ_10; this is a true open-drain pin that requires an external pullup to output correct values for I2C, GPIO, and LPUART0. |
| 12 | PTB4/IRQ_11 | bidirectional | General-purpose I/O port B bit 4 with external interrupt IRQ_11; this is a true open-drain pin that requires an external pullup to output correct values for I2C, GPIO, and LPUART0. |
| 13 | PTB5/IRQ_12 | bidirectional | General-purpose I/O port B bit 5 with external interrupt IRQ_12, with alternate functions NMI_b, ADC0_SE1/CMP0_IN1, and TPM1_CH1. |
| 14 | PTA0/IRQ_0/LLWU_P7 | bidirectional | General-purpose I/O port A bit 0 with external interrupt IRQ_0 and low-leakage wakeup input LLWU_P7; the default function is SWD_CLK, with alternate functions TPM1_CH0 and ADC0_SE15/CMP0_IN2. |
| 15 | PTA1/IRQ_1/LPTMR0_ALT1 | bidirectional | General-purpose I/O port A bit 1 with external interrupt IRQ_1 and LPTMR0 alternate input; the default function is RESET_b, with alternate function TPM_CLKIN0. |
| 16 | PTA2 | bidirectional | General-purpose I/O port A bit 2; the default function is SWD_DIO, with alternate function CMP0_OUT. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-16-EP(3x3) |
| Category | Embedded Processors & Controllers |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 5 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | human body model | 5 | |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | charged-device model | 5 | |
| Latch-up current at ambient temperature of 105 °C | ILAT | -100 | 100 | mA | ambient temperature of 105 °C | 5 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 6 | ||
| Digital supply current | IDD | 120 | mA | 6 | |||
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | applies to all port pins | 6 | |
| Supply voltage | VDD | 1.71 | 3.6 | V | 7 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 7 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 7 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 7 | ||
| IO pin negative DC injection current, single pin | IICIO | -5 | mA | VIN < VSS-0.3V | 7 | ||
| Contiguous pin DC injection current, regional limit | IICcont | -25 | mA | negative current injection; includes sum of negative injection currents of 16 contiguous pins | 7 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 7 | |||
| Temperature range (ambient) | TA | -40 | 105 | °C | QFN packages | 1 | |
| Total deviation of IRC48M frequency at high voltage over temperature | Δfirc48m_ol_hv | -1 | 1 | %firc48m | VDD=1.89V-3.6V over temperature | 30 | |
| Period jitter (RMS) | Jcyc_irc48m | 35 | 150 | ps | 30 | ||
| IRC48M startup time | tirc48mst | 2 | 3 | µs | 30 | ||
| Supply voltage (LIRC8M/2M) | VDD | 1.08 | 1.47 | V | 30 | ||
| Temperature range (LIRC8M/2M) | T | -40 | 125 | °C | 30 | ||
| Supply current in 2 MHz mode | IDD_2M | 14 | 17 | µA | 30 | ||
| Supply current in 8 MHz mode | IDD_8M | 30 | 35 | µA | 30 | ||
| Output frequency range (trimmed) 2 MHz | fIRC_T_2M | -3 | 3 | %fIRC | VDD≥1.89 V | 30 | |
| Output frequency range (trimmed) 8 MHz | fIRC_T_8M | -3 | 3 | %fIRC | VDD≥1.89 V | 30 | |
| Startup time 2 MHz | Tsu_2M | 12.5 | µs | 30 | |||
| Startup time 8 MHz | Tsu_8M | 12.5 | µs | 30 | |||
| Supply voltage (oscillator) | VDD | 1.71 | 3.6 | V | 30 | ||
| Oscillator crystal or resonator frequency, low frequency mode | fosc_lo | 32 | 40 | kHz | low frequency mode | 31 | |
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | external clock mode | 31 |
| Longword Program high-voltage time | thvpgm4 | 7.5 | 18 | µs | 31 | ||
| Sector Erase high-voltage time | thversscr | 13 | 113 | ms | 31 | ||
| Erase All high-voltage time | thversall | 52 | 452 | ms | 31 | ||
| Program Longword execution time | tpgm4 | 65 | 145 | µs | 32 | ||
| Erase Flash Sector execution time | tersscr | 14 | 114 | ms | 32 | ||
| Erase All Blocks execution time | tersall | 61 | 500 | ms | 32 | ||
| Average current adder during high voltage flash programming operation | IDD_PGM | 2.5 | 6 | mA | 32 | ||
| Average current adder during high voltage flash erase operation | IDD_ERS | 1.5 | 4 | mA | 32 | ||
| Data retention after up to 10 K cycles | tnvmretp10k | 5 | 50 | years | 32 | ||
| Data retention after up to 1 K cycles | tnvmretp1k | 20 | 100 | years | 32 | ||
| Cycling endurance | nnvmcycp | 10 | 50 | K cycles | -40 °C ≤ Tj ≤ 125 °C | 32 | |
| Analog supply voltage (ADC) | VDDA | 1.71 | 3.6 | V | Absolute | 33 | |
| Supply voltage delta to VDD | ΔVDDA | -100 | 0 | 100 | mV | VDD, VDDA, DC potential difference | 33 |
| Ground voltage delta to VSS | ΔVSSA | -100 | 0 | 100 | mV | VSS, VSSA, DC potential difference | 33 |
| ADC reference voltage high | VREFH | 1.13 | V | 33 | |||
| Input capacitance | CADIN | 4 | 5 | pF | 8-bit / 10-bit / 12-bit modes | 33 | |
| Input series resistance | RADIN | 2 | 5 | kΩ | 33 | ||
| Analog source resistance (external) | RAS | 5 | kΩ | 12-bit modes fADCK < 4 MHz | 33 | ||
| ADC conversion clock frequency | fADCK | 1 | 18 | MHz | ≤ 12-bit mode | 33 | |
| ADC conversion rate | Crate | 20 | 818.33 | Ksps | ≤ 12-bit modes; no ADC hardware averaging; continuous conversions enabled | 33 | |
| ADC supply current | IDDA_ADC | 0.215 | 1.7 | mA | 34 | ||
| Voltage reference output with factory trim at nominal VDDA and temperature=25C | Vout | 1.1915 | 1.195 | 1.1977 | V | nominal VDDA and temperature=25C; factory trim | 40 |
| Voltage reference output, factory trim | Vout | 1.1584 | 1.2376 | V | factory trim | 40 | |
| Voltage reference output, user trim | Vout | 1.193 | 1.197 | V | user trim | 40 | |
| Temperature drift (Vmax -Vmin across the full temperature range) | Vtdrift | 50 | mV | Vmax - Vmin across full temperature range: 0 to 70°C | 40 | ||
| Supply current, High-speed mode | IDDHS | 200 | µA | EN=1, PMODE=1 | 37 | ||
| Propagation delay, high-speed mode | tDHS | 20 | 50 | 200 | ns | EN=1, PMODE=1 | 37 |
| Data setup time (inputs), SPI master slew rate disabled | tSU | 22 | ns | SPI master mode timing on slew rate disabled pads | 41 | ||
| Data valid (after SPSCK edge), SPI master slew rate disabled | tv | 10 | ns | SPI master mode timing on slew rate disabled pads | 41 | ||
| Voltage reference output with factory trim (limited range) | Vout | 1.173 | 1.225 | V | with factory trim | 40 |
CAD (KiCad official)
- Symbol:
MKL03Z16VFG4 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
mkl03z16vfg4-etched.step/mkl03z16vfg4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl03z16vfg4.step/mkl03z16vfg4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (59 pp, sha256
74d10beb78df4e44, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).