Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA691IDBVR

Texas Instruments · Operational Amplifier · SOT-23-6

OPA691IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output output Output terminal providing voltage swing of ±4.0V into no load and ±3.9V into 100Ω load with sourcing/sinking current of 190mA and short-circuit current of 250mA.
2 -VS power_in Negative supply voltage connection supporting ±2V to ±6V dual-supply or ground reference for +5V to +12V single-supply operation with junction temperature rating of +175°C maximum.
3 Noninverting Input input Non-inverting input with common-mode input range of ±3.2V to ±3.5V over -40°C to +85°C, input impedance of 100
4 Inverting Input input Inverting input with 35Ω open-loop input resistance, bias current of ±5µA to ±40µA, and maximum differential input voltage of ±1.2V.
5 DIS input Disable control input that reduces supply current to ≤150µA and places output in high impedance (70dB isolation at 5MHz) when pulled below 1.8V with 400ns disable time, or enables normal operation when held above 3.3V with 25ns enable time.
6 +VS power_in Positive supply connection for ±2V to ±6V dual-supply or +5V to +12V single-supply operation with quiescent current of 5.1mA typical at ±5V and power-supply rejection ratio of 49dB to 58dB over temperature.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Small-Signal Bandwidth 200 225 MHz VS = ±5V; G = +2, RF = 402Ω 3
Bandwidth for 0.1dB Gain Flatness 40 90 MHz VS = ±5V; G = +2, VO = 0.5VPP 3
Peaking at a Gain of +1 0.2 1 dB VS = ±5V; RF = 453Ω, VO = 0.5VPP 3
Slew Rate 1400 2100 V/µs VS = ±5V; G = +2, 4V Step 3
2nd-Harmonic (RL = 100Ω) -70 -63 dBc VS = ±5V; G = +2, f = 5MHz, VO = 2VPP; RL = 100Ω 3
Input Voltage Noise 1.7 2.5 nV/√HZ VS = ±5V; f > 1MHz 3
Open-Loop Transimpedance Gain (ZOL) ZOL 125 225 kΩ VS = ±5V; VO = 0V, RL = 100Ω 3
Input Offset Voltage -2.5 0.5 2.5 mV VS = ±5V; VCM = 0V 3
Average Offset Voltage Drift -20 12 20 µV/°C VS = ±5V; VCM = 0V 3
Noninverting Input Bias Current 15 35 µA VS = ±5V; VCM = 0V 3
Average Noninverting Input Bias Current Drift -300 -300 nA/°C VS = ±5V; VCM = 0V 3
Inverting Input Bias Current -25 5 25 µA VS = ±5V; VCM = 0V 3
Common-Mode Input Range 3.4 3.5 V VS = ±5V (table header) 3
Common-Mode Rejection 52 56 dB VS = ±5V; VCM = 0V 3
Voltage Output Swing (No Load) 3.8 4 V VS = ±5V; No Load 3
Voltage Output Swing (100Ω Load) 3.7 3.9 V VS = ±5V; 100Ω Load 3
Current Output, Sourcing 160 190 mA VS = ±5V; VO = 0 3
Current Output, Sinking -160 -190 mA VS = ±5V; VO = 0 3
Power-Down Supply Current (+VS) -150 -300 µA VS = ±5V; VDIS = 0 3
Enable Voltage 3.5 3.3 V VS = ±5V (table header) 3
Disable Voltage 1.8 1.7 V VS = ±5V (table header) 3
Control Pin Input Bias Current (DIS) 75 130 µA VS = ±5V; VDIS = 0 3
Maximum Operating Voltage Range 6 V VS = ±5V (table header) 3
Minimum Operating Voltage Range 2 V VS = ±5V (table header) 3
Max Quiescent Current 5.1 5.3 mA VS = ±5V 3
Min Quiescent Current 4.9 5.1 mA VS = ±5V 3
Power-Supply Rejection Ratio (-PSRR) 52 58 dB VS = ±5V; Input Referred 3
Small-Signal Bandwidth 168 190 MHz VS = +5V; G = +2, RF = 453Ω 4
Bandwidth for 0.1dB Gain Flatness 40 90 MHz VS = +5V; G = +2, VO < 0.5VPP 4
Peaking at a Gain of +1 0.2 1 dB VS = +5V; RF = 649Ω, VO < 0.5VPP 4
Slew Rate 600 850 V/µs VS = +5V; G = +2, 2V Step 4
2nd-Harmonic (RL = 100Ω to VS/2) -66 -58 dBc VS = +5V; G = +2, f = 5MHz, VO = 2VPP; RL = 100Ω to VS/2 4
Open-Loop Transimpedance Gain (ZOL) ZOL 100 200 kΩ VS = +5V; VO = VS/2, RL = 100Ω to VS/2 4
Input Offset Voltage -3 0.5 3 mV VS = +5V; VCM = 2.5V 4
Average Offset Voltage Drift -20 12 20 µV/°C VS = +5V; VCM = 2.5V 4
Noninverting Input Bias Current 20 40 µA VS = +5V; VCM = 2.5V 4
Average Noninverting Input Bias Current Drift -250 -250 nA/°C VS = +5V; VCM = 2.5V 4
Inverting Input Bias Current -20 5 20 µA VS = +5V; VCM = 2.5V 4
Least Positive Input Voltage 1.5 1.6 V VS = +5V (table header) 4
Most Positive Input Voltage 3.4 3.5 V VS = +5V (table header) 4
Common-Mode Rejection Ratio (CMRR) 50 54 dB VS = +5V; VCM = VS/2 4
Most Positive Output Voltage (No Load) 3.8 4 V VS = +5V; No Load 4
Most Positive Output Voltage (RL = 100Ω to VS/2) 3.7 3.9 V VS = +5V; RL = 100Ω to VS/2 4
Least Positive Output Voltage (No Load) 1 1.2 V VS = +5V; No Load 4
Least Positive Output Voltage (RL = 100Ω to VS/2) 1.1 1.3 V VS = +5V; RL = 100Ω to VS/2 4
Current Output, Sourcing 120 160 mA VS = +5V; VO = VS/2 4
Current Output, Sinking -120 -160 mA VS = +5V; VO = VS/2 4
Power-Down Supply Current (+VS) -150 -300 µA VS = +5V; VDIS = 0 4
Enable Voltage 3.5 3.3 V VS = +5V (table header) 4
Disable Voltage 1.8 1.7 V VS = +5V (table header) 4
Max Single-Supply Operating Voltage 12 V VS = +5V (table header) 4
Min Single-Supply Operating Voltage 4 V VS = +5V (table header) 4
Max Quiescent Current 4.5 4.8 mA VS = +5V 4
Min Quiescent Current 4.1 4.5 mA VS = +5V 4
Power Supply (Absolute Maximum) -6.5 6.5 VDC Printed as ±6.5VDC 2
Differential Input Voltage (Absolute Maximum) -1.2 1.2 V Printed as ±1.2V 2
Storage Temperature Range (ID, IDBV) -65 125 °C ID, IDBV 2
Junction Temperature (TJ) (Absolute Maximum) TJ 175 °C 2
Specified Temperature Range -40 85 °C Specification: D, DBV 3
Thermal Resistance, θJA Junction-to-Ambient θJA 150 °C/W DBV SOT23-6 3

CAD (KiCad official)

  • Symbol: OPA691IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: opa691idbvr-etched.step / opa691idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa691idbvr.step / opa691idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 f3ed1c5d9d77f59d, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF