Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF5010AIDR

Texas Instruments · Voltage Reference · SOIC-8

REF5010AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do Not Connect. This pin must be left floating; internal connections are used by TI and any external connection can disturb device operation.
2 VIN power_in Input supply voltage. Recommended range is (VOUT + 0.2V) to 18V (minimum 2.7V for all except REF5020). Absolute maximum -0.2V to +18V. Bypass with 1µF ceramic capacitor to GND.
3 TEMP output Temperature monitor output. Provides a temperature-dependent voltage of ~575mV at 25°C with a temperature coefficient of ~2.64mV/°C over -40°C to +125°C. Used for ambient/junction temperature sensing.
4 GND power_in Ground reference for the device. Connect directly to the analog ground plane.
5 TRIM/NR input Output trim and noise-reduction pin. Allows fine adjustment of VOUT via an external resistor network, and connection of an external capacitor to reduce output noise.
6 VOUT output Reference voltage output. Nominal 10.0V for REF5010. Supports ±10mA source/sink capability. Bypass with 1µF (or larger, e.g. 22µF for improved transient response) to GND. Short-circuit current is typically 25mA.
7 NC unconnected No internal connection. May be left floating or connected to any potential without affecting device operation.
8 DNC unconnected Do Not Connect. This pin must be left floating; internal connections are used by TI and any external connection can disturb device operation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • REF5010AIDR
  • REF5010AIDRAIDGK
  • REF5010AIDRAIDGKR
  • REF5010AIDRIDGK
  • REF5010AIDRIDGKR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Initial accuracy, standard grade (AID) -0.1 0.1 % All voltage options(1) 5
Line regulation ΔVO(ΔVI) 0.1 1 ppm/V VIN = (VOUT + 0.2) 至 18V 5
Line regulation over temperature ΔVO(ΔVI) 0.2 1 ppm/V VIN = VOUT + 0.2V, TA = –40°C 至 125°C 5
Load regulation ΔVO(ΔIL) 20 30 ppm/mA –10mA < ILOAD < 10mA, VIN = VOUT + 0.75V 5
Output voltage temperature drift, standard grade dVOUT/dT 3 8 ppm/°C 5
Quiescent current 0.8 1 mA 6
Quiescent current over temperature 1.2 mA TA = –40°C 至 125°C 6
Power supply voltage VS VS 18 V See note (1) 6
Recommended input voltage VIN VIN 18 V 4
Recommended output current IOUT -10 10 mA 4
Specified temperature range -40 125 °C 6
Input voltage (absolute maximum) VIN -0.2 18 V 4
Output short-circuit current (absolute maximum) -30 30 mA 4
Operating temperature range (absolute maximum) -55 125 °C 4
Junction temperature (absolute maximum) TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD, human body model (HBM) V(ESD) -3000 3000 V ANSI/ESDA/JEDEC JS-001 4
ESD, charged device model (CDM) V(ESD) -1000 1000 V JEDEC JESD22-C101 4
Junction-to-ambient thermal resistance (D, SOIC) RθJA 115 °C/W 4
Junction-to-case (top) thermal resistance (D, SOIC) RθJC(top) 63.4 °C/W 4
Junction-to-board thermal resistance (D, SOIC) RθJB 57.1 °C/W 4
Junction-to-top characterization parameter (D, SOIC) ψJT 15.4 °C/W 4
Junction-to-board characterization parameter (D, SOIC) ψJB 56.2 °C/W 4
Output voltage, REF5010 nominal VOUT 10 V 5

CAD (KiCad official)

  • Symbol: REF5010AIDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ref5010aidr-etched.step / ref5010aidr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref5010aidr.step / ref5010aidr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 39d19fe7464a6867, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF