3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT1602BI-21-33S-48.000000E
SiTime · Pre-programmed Oscillators · SMD3225-4P
SIT1602BI-21-33S-48.000000E from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | In standby (ST) mode, a logic low on pin 1 puts the device to sleep with the output weakly pulled down and supply current reduced to I_std, while a logic high gives the specified frequency output; VIH is 70% Vdd minimum and VIL is 30% Vdd maximum. |
| 2 | GND | power_in | Electrical ground; a capacitor of 0.1 µF or higher between Vdd and GND is required. |
| 3 | OUT | output | Oscillator output, LVCMOS/HCMOS compatible with 20% to 80% rise/fall time specified in Table 1. |
| 4 | VDD | power_in | Power supply voltage; for the 3.3 V option (Vdd_3.3) the rated range is 2.97 V to 3.63 V, and a capacitor of 0.1 µF or higher between Vdd and GND is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | F_stab | -20 | 20 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. | 1 | |
| Operating Temperature Range (Industrial) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage Option Vdd_3.3 | Vdd_3.3 | 2.97 | 3.3 | 3.63 | V | 1 | |
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY | 1 | |
| OE Disable Current | I_OD | 4.2 | mA | Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. OE = GND, Output in high-Z state | 1 | ||
| Standby Current | I_std | 2.6 | 4.3 | A | ST = GND, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. Output is weakly pulled down | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 2 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd_3.0 and Vdd_3.3) | 2 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOH = -4 mA (Vdd_3.0 and Vdd_3.3) | 2 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | k | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Input Pull-up Impedance (ST logic low) | Z_in | 2 | M | Pin 1, ST logic low | 2 | ||
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 138 | ns | f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3*cycles | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| Output Frequency Range | f | 3.57 | 77.76 | MHz | 52 standard frequencies between 3.57 MHz and 77.76 MHz. Refer to Table 13 for the exact list of supported frequencies | 1 | |
| Output Frequency (this MPN) | f | 48 | MHz | Frequency code 48.000000 MHz, Table 13 | 13 | ||
| Rise/Fall Time (20% to 80%) | Tr, Tf | 1 | 2 | ns | 20% - 80% Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3 | 2 | |
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY | 2 | |
| RMS Phase Jitter (random) 900 kHz to 7.5 MHz | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| RMS Phase Jitter (random) 12 kHz to 20 MHz | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage (absolute) | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | Exceeding this temperature for extended period of time may damage the device | 3 | |||
| Maximum Operating Junction Temperature at 85°C ambient | 95 | °C | Max operating ambient temperature 85°C | 3 | |||
| Maximum Operating Junction Temperature at 70°C ambient | 80 | °C | Max operating ambient temperature 70°C | 3 | |||
| Thermal Resistance JA, 4 Layer Board (3225) | θJA | 109 | °C/W | JA, 4 Layer Board, 3225 package | 3 | ||
| Thermal Resistance JA, 2 Layer Board (3225) | θJA | 212 | °C/W | JA, 2 Layer Board, 3225 package | 3 | ||
| Thermal Resistance JC, Bottom (3225) | θJC | 27 | °C/W | JC, Bottom, 3225 package | 3 |
CAD (KiCad official)
- Symbol:
SIT1602BI-21-33S-48.000000E - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit1602bi-21-33s-48-000000e-etched.step/sit1602bi-21-33s-48-000000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit1602bi-21-33s-48-000000e.step/sit1602bi-21-33s-48-000000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
70f0fbf9f24afbd0, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).