3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTS3021ILT
STMicroelectronics · Comparators · SOT-23-5
TS3021ILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull comparator output, short-circuit current typically 51 mA source and 40 mA sink at VCC = 5 V. |
| 2 | VCC- | power_in | Negative supply (ground) pin; all voltages except differential are referenced to it, supply VCC = (VCC+) - (VCC-) is 1.8 to 5 V operating and 5.5 V absolute maximum. |
| 3 | IN+ | input | Non-inverting rail-to-rail input, common mode range (VCC-) - 0.2 V to (VCC+) + 0.2 V up to 85 °C and differential input voltage limited to ±5 V. |
| 4 | IN- | input | Inverting rail-to-rail input, common mode range (VCC-) - 0.2 V to (VCC+) + 0.2 V up to 85 °C and differential input voltage limited to ±5 V. |
| 5 | VCC+ | power_in | Positive supply pin, operating range 1.8 to 5 V (2 to 5 V from -40 °C) and 5.5 V absolute maximum above VCC-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (TS3021), 25 °C | VIO | 0.5 | 6 | mV | VCC = 2 V, Tamb = 25 °C, full Vicm range | 4 | |
| Input offset voltage (TS3021), full temperature | VIO | 7 | mV | -40 °C < Tamb < 125 °C, VCC = 2 V | 4 | ||
| Input offset current, 25 °C | IIO | 1 | 20 | nA | Tamb, VCC = 2 V | 4 | |
| Input bias current, 25 °C | IIB | 86 | 160 | nA | Tamb, VCC = 2 V | 4 | |
| Input bias current, full temperature | IIB | 300 | nA | -40 °C < Tamb < 125 °C, VCC = 2 V | 4 | ||
| Supply current, output high, 25 °C | ICC | 73 | 90 | µA | No load, output high, Vicm = 0 V, VCC = 2 V | 4 | |
| Supply current, output high, full temperature | ICC | 115 | µA | No load, output high, Vicm = 0 V, -40 °C < Tamb < 125 °C, VCC = 2 V | 4 | ||
| Supply current, output low, 25 °C | ICC | 84 | 105 | µA | No load, output low, Vicm = 0 V, VCC = 2 V | 4 | |
| Output voltage high, 25 °C | VOH | 1.88 | 1.92 | V | Isource = 1 mA, VCC = 2 V | 4 | |
| Output voltage high, full temperature | VOH | 1.8 | V | -40 °C < Tamb < 125 °C, VCC = 2 V | 4 | ||
| Output voltage low, 25 °C | VOL | 60 | 100 | mV | Isink = 1 mA, VCC = 2 V | 4 | |
| Output voltage low, full temperature | VOL | 150 | mV | -40 °C < Tamb < 125 °C, VCC = 2 V | 4 | ||
| Common mode rejection ratio | CMRR | 67 | dB | 0 < Vicm < 2 V, VCC = 2 V | 4 | ||
| Supply voltage rejection ratio | SVR | 58 | 73 | dB | ∆Vcc = 2 to 5 V | 4 | |
| Propagation delay low to high, overdrive 100 mV | TPLH | 38 | 60 | ns | Vicm = 0 V, f = 10 kHz, CL = 50 pF, overdrive = 100 mV, VCC = 2 V | 4 | |
| Propagation delay high to low, overdrive 100 mV | TPHL | 40 | 60 | ns | Vicm = 0 V, f = 10 kHz, CL = 50 pF, overdrive = 100 mV, VCC = 2 V | 4 | |
| Input offset voltage (TS3021), 25 °C | VIO | 0.5 | 6 | mV | VCC = 3.3 V, Tamb = 25 °C, full Vicm range | 6 | |
| Input offset voltage (TS3021), full temperature | VIO | 7 | mV | -40 °C < Tamb < 125 °C, VCC = 3.3 V | 6 | ||
| Input offset current, 25 °C | IIO | 1 | 20 | nA | Tamb, VCC = 3.3 V | 6 | |
| Input bias current, 25 °C | IIB | 86 | 160 | nA | Tamb, VCC = 3.3 V | 6 | |
| Input bias current, full temperature | IIB | 300 | nA | -40 °C < Tamb < 125 °C, VCC = 3.3 V | 6 | ||
| Supply current, output high, 25 °C | ICC | 75 | 90 | µA | No load, output high, Vicm = 0 V, VCC = 3.3 V | 6 | |
| Supply current, output high, full temperature | ICC | 120 | µA | No load, output high, Vicm = 0 V, -40 °C < Tamb < 125 °C, VCC = 3.3 V | 6 | ||
| Supply current, output low, 25 °C | ICC | 86 | 110 | µA | No load, output low, Vicm = 0 V, VCC = 3.3 V | 6 | |
| Output voltage high, 25 °C | VOH | 3.2 | 3.25 | V | Isource = 1 mA, VCC = 3.3 V | 6 | |
| Output voltage high, full temperature | VOH | 3.1 | V | -40 °C < Tamb < 125 °C, VCC = 3.3 V | 6 | ||
| Output voltage low, 25 °C | VOL | 40 | 80 | mV | Isink = 1 mA, VCC = 3.3 V | 6 | |
| Output voltage low, full temperature | VOL | 150 | mV | -40 °C < Tamb < 125 °C, VCC = 3.3 V | 6 | ||
| Common mode rejection ratio | CMRR | 75 | dB | 0 < Vicm < 3.3 V, VCC = 3.3 V | 6 | ||
| Supply voltage rejection ratio | SVR | 58 | 73 | dB | ∆Vcc = 2 to 5 V | 6 | |
| Propagation delay low to high, overdrive 100 mV | TPLH | 39 | 65 | ns | Vicm = 0 V, f = 10 kHz, CL = 50 pF, overdrive = 100 mV, VCC = 3.3 V | 6 | |
| Propagation delay high to low, overdrive 100 mV | TPHL | 41 | 65 | ns | Vicm = 0 V, f = 10 kHz, CL = 50 pF, overdrive = 100 mV, VCC = 3.3 V | 6 | |
| Input offset voltage (TS3021), 25 °C | VIO | 0.5 | 6 | mV | VCC = 5 V, Tamb = 25 °C, full Vicm range | 8 | |
| Input offset voltage (TS3021), full temperature | VIO | 7 | mV | -40 °C < Tamb < 125 °C, VCC = 5 V | 8 | ||
| Input offset current, 25 °C | IIO | 1 | 20 | nA | Tamb, VCC = 5 V | 8 | |
| Input bias current, 25 °C | IIB | 86 | 160 | nA | Tamb, VCC = 5 V | 8 | |
| Input bias current, full temperature | IIB | 300 | nA | -40 °C < Tamb < 125 °C, VCC = 5 V | 8 | ||
| Supply current, output high, 25 °C | ICC | 77 | 95 | µA | No load, output high, Vicm = 0 V, VCC = 5 V | 8 | |
| Supply current, output high, full temperature | ICC | 125 | µA | No load, output high, Vicm = 0 V, -40 °C < Tamb < 125 °C, VCC = 5 V | 8 | ||
| Supply current, output low, 25 °C | ICC | 89 | 115 | µA | No load, output low, Vicm = 0 V, VCC = 5 V | 8 | |
| Output voltage high, 25 °C | VOH | 4.8 | 4.84 | V | Isource = 4 mA, VCC = 5 V | 8 | |
| Output voltage high, full temperature | VOH | 4.7 | V | -40 °C < Tamb < 125 °C, VCC = 5 V | 8 | ||
| Output voltage low, 25 °C | VOL | 130 | 180 | mV | Isink = 4 mA, VCC = 5 V | 8 | |
| Output voltage low, full temperature | VOL | 250 | mV | -40 °C < Tamb < 125 °C, VCC = 5 V | 8 | ||
| Common mode rejection ratio | CMRR | 79 | dB | 0 < Vicm < 5 V, VCC = 5 V | 8 | ||
| Supply voltage rejection ratio | SVR | 58 | 73 | dB | ∆Vcc = 2 to 5 V | 8 | |
| Propagation delay low to high, overdrive 100 mV | TPLH | 42 | 75 | ns | Vicm = 0 V, f = 10 kHz, CL = 50 pF, overdrive = 100 mV, VCC = 5 V | 8 | |
| Propagation delay high to low, overdrive 100 mV | TPHL | 45 | 75 | ns | Vicm = 0 V, f = 10 kHz, CL = 50 pF, overdrive = 100 mV, VCC = 5 V | 8 | |
| Supply voltage | VCC | 5.5 | V | VCC = (VCC+) - (VCC-), referenced to (VCC-) | 3 | ||
| Differential input voltage | VID | -5 | 5 | V | 3 | ||
| Junction temperature | Tj | 150 | °C | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| ESD HBM | 5000 | V | Human body model | 3 | |||
| ESD MM | 300 | V | Machine model | 3 | |||
| Latch-up immunity | 200 | mA | 3 | ||||
| Supply voltage operating range | VCC | 1.8 | 5 | V | 0 °C < Tamb < 125 °C | 3 | |
| Supply voltage operating range | VCC | 2 | 5 | V | -40 °C < Tamb < 125 °C | 3 | |
| Operating temperature range | Toper | -40 | 125 | °C | 3 | ||
| Thermal resistance junction-to-ambient, SOT23-5 | Rthja | 250 | °C/W | SOT23-5; values are typical (note 3) | 3 | ||
| Thermal resistance junction-to-case, SOT23-5 | Rthjc | 81 | °C/W | SOT23-5; values are typical (note 3) | 3 |
CAD (KiCad official)
- Symbol:
TS3021ILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ts3021ilt-etched.step/ts3021ilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ts3021ilt.step/ts3021ilt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (20 pp, sha256
cee1ac194cd971f3, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).