Contents

README

markdown

LD1117AG-ADJ-A

UTC Unisonic Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223

LD1117AG-ADJ-A from UTC Unisonic Tech, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ input Adjust pin. Feedback input for setting output voltage via external resistor divider (R1 tied between OUT and ADJ, R2 tied between ADJ and GND). Reference voltage VREF = 1.25V (typ) sits between OUT and ADJ. Adjust-pin current IADJ = 60 uA typ (120 uA max).
2 VOUT power_out Regulated output. Delivers up to 1.0A (LD1117A). Requires an output capacitor of >= 10 uF (MLCC supported). For SOT-223, the exposed tab is electrically tied to this pin.
3 VIN power_in Unregulated input supply. Absolute max 18 V DC; recommended operating input up to 15 V. Must sit at least ~1.1-1.3 V above VOUT (dropout at 1 A). Requires >= 10 uF input capacitor.

Key specifications

Parameter Value
Manufacturer UTC Unisonic Tech
Package SOT-223
Category PMIC
Pins 3

Ordering variants

  • LD1117AG-ADJ-AAA3
  • LD1117AG-ADJ-AAB3
  • LD1117AG-ADJ-ATA3
  • LD1117AG-ADJ-ATF3
  • LD1117AG-ADJ-ATN3
  • LD1117AG-ADJ-ATND
  • LD1117AG-ADJ-AT2Q
  • LD1117AG-ADJ-ATQ2
  • LD1117AG-ADJ-ATQ3
  • LD1117AG-ADJ-AS08

CAD (KiCad official)

  • Symbol: LD1117AG-ADJ-A
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UTC Unisonic Tech datasheet (None pp, sha256 f7f26a117cb07dc2, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗