3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT232ARZ
HTCSEMI · RS232 ICs · SOP-16
HT232ARZ from HTCSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Connects to the external capacitor of the positive voltage multiplier; the typical application circuit uses 1.0 µF. |
| 2 | V+ | power_out | Positive voltage multiplier output, specified at 5.0 V minimum and 14 V maximum in the transmitter parameters. |
| 3 | C1- | passive | Connects to the external capacitor of the positive voltage multiplier; the typical application circuit uses 1.0 µF. |
| 4 | C2+ | passive | Connects to the external capacitor of the negative voltage multiplier; the typical application circuit uses 1.0 µF. |
| 5 | C2- | passive | Connects to the external capacitor of the negative voltage multiplier; the typical application circuit uses 1.0 µF. |
| 6 | V- | power_out | Negative voltage multiplier output, specified at -5.0 V maximum and -14 V minimum in the transmitter parameters. |
| 7 | T2OUT | output | RS-232 level transmitter data output; short-circuit output current is limited to 60 mA per the absolute maximum conditions. |
| 8 | R2IN | input | RS-232 level receiver data input with receiver input voltage rated at -30 V to 30 V. |
| 9 | R2OUT | output | TTL/KMOS level receiver data output, rated for an output current of 24 mA. |
| 10 | T2IN | input | TTL/KMOS level transmitter data input, compatible with standard CMOS input levels and a low input current of 1.0 µA. |
| 11 | T1IN | input | TTL/KMOS level transmitter data input, compatible with standard CMOS input levels and a low input current of 1.0 µA. |
| 12 | R1OUT | output | TTL/KMOS level receiver data output, rated for an output current of 24 mA. |
| 13 | R1IN | input | RS-232 level receiver data input with receiver input voltage rated at -30 V to 30 V. |
| 14 | T1OUT | output | RS-232 level transmitter data output; short-circuit output current is limited to 60 mA per the absolute maximum conditions. |
| 15 | GND | power_in | Common ground reference for the device (datasheet labels this pin 'Common output'). |
| 16 | VCC | power_in | Supply pin for the device, rated 4.5 V to 5.5 V in the absolute maximum conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 6 | V | 1 | ||
| Transmitter high output voltage | V+ | 14 | V | 1 | |||
| Transmitter low output voltage | V- | -0.3 | -14 | V | 1 | ||
| Transmitter input voltage | VTIN | -0.3 | V | 1 | |||
| Receiver input voltage | VRIN | -30 | 30 | V | 1 | ||
| Ambient temperature | Ta | -60 | 150 | °C | 1 | ||
| Supply voltage | VCC | 4.5 | 5.5 | V | 1 | ||
| Transmitter output high voltage | V+ | 5 | V | 1 | |||
| Transmitter output low voltage | V- | -5 | V | 1 | |||
| Transmitter input voltage | VTIN | 0 | V | 1 | |||
| Receiver input voltage | VRIN | -30 | 30 | V | 1 | ||
| Transmitter short circuit output current | ISC | 60 | mA | 1 | |||
| Ambient temperature | Ta | -40 | 85 | °C | 1 | ||
| Consumption current static | ICC | 10 | mA | 25C; VCC = 5.5 V; VIL = 0 V | 2 | ||
| Consumption current static | ICC | 14 | mA | -40C to 85C; VCC = 5.5 V; VIL = 0 V | 2 | ||
| Hysteresis voltage | Vh | 0.2 | 0.9 | V | 25C; VCC = 5.0 V | 2 | |
| Hysteresis voltage | Vh | 0.2 | 1 | V | -40C to 85C; VCC = 5.0 V | 2 | |
| On (operation) voltage | VOn | 2.4 | V | 25C; VO 0.1 V; IOL 20 mkA | 2 | ||
| On (operation) voltage | VOn | 2.3 | V | -40C to 85C; VO 0.1 V; IOL 20 mkA | 2 | ||
| Off (dropout) voltage | Voff | 0.8 | V | 25C; VO VCC -0.1 V; IOH -20 µA | 2 | ||
| Off (dropout) voltage | Voff | 0.9 | V | -40C to 85C; VO VCC -0.1 V; IOH -20 µA | 2 | ||
| Output low voltage | VOL | 0.3 | V | 25C; IOL = 3.2 mA; VCC = 4.5 V; VIH = 2.4 V | 2 | ||
| Output low voltage | VOL | 0.4 | V | -40C to 85C; IOL = 3.2 mA; VCC = 4.5 V; VIH = 2.4 V | 2 | ||
| Output high voltage | VOH | 3.6 | V | 25C; IOH = -1.0 mA; VCC = 4.5 V; VIL = 0.8 V | 2 | ||
| Output high voltage | VOH | 3.5 | V | -40C to 85C; IOH = -1.0 mA; VCC = 4.5 V; VIL = 0.8 V | 2 | ||
| Input resistance | RI | 3 | 7 | kOhm | 25C; VCC = 5.0 V | 2 | |
| Output low voltage (transmitter) | VOL | -5.2 | V | 25C; VCC = 4.5 V; VIH = 2.0 V; RL = 3.0 kOhm | 2 | ||
| Output low voltage (transmitter) | VOL | -5 | V | -40C to 85C; VCC = 4.5 V; VIH = 2.0 V; RL = 3.0 kOhm | 2 | ||
| Output high voltage (transmitter) | VOH | 5.2 | V | 25C; VCC = 4.5 V; VIL = 0.8 V; RL = 3.0 kOhm | 2 | ||
| Output high voltage (transmitter) | VOH | 5 | V | -40C to 85C; VCC = 4.5 V; VIL = 0.8 V; RL = 3.0 kOhm | 2 | ||
| Input low current | IIL | -1 | µA | 25C; VCC = 5.5 V; VIL = 0 V | 2 | ||
| Input low current | IIL | -10 | µA | -40C to 85C; VCC = 5.5 V; VIL = 0 V | 2 | ||
| Input high current | IIH | 1 | µA | 25C; VCC = 5.5 V; VIH = VCC | 2 | ||
| Input high current | IIH | 10 | µA | -40C to 85C; VCC = 5.5 V; VIH = VCC | 2 | ||
| Speed of output front change | SR | 3 | 30 | V/mks | 25C; VCC = 5.0 V; CL = 50-1000 pF; RL = 3.0-7.0 kOhm | 2 | |
| Speed of output front change | SR | 2.7 | 27 | V/mks | -40C to 85C; VCC = 5.0 V; CL = 50-1000 pF; RL = 3.0-7.0 kOhm | 2 | |
| Output resistance | RO | 350 | Ohm | 25C; VCC = V+ = V- = 0 V; VO = 2 V | 2 | ||
| Output resistance | RO | 300 | Ohm | -40C to 85C; VCC = V+ = V- = 0 V; VO = 2 V | 2 | ||
| Short circuit output current | ISC | -50 | 50 | mA | 25C; VCC = 5.5 V; VO = 0 V; VI = VCC / VI = 0 V | 2 | |
| Short circuit output current | ISC | -60 | 60 | mA | -40C to 85C; VCC = 5.5 V; VO = 0 V; VI = VCC / VI = 0 V | 2 | |
| Speed of information transmission | ST | 140 | kbps | 25C; VCC = 4.5 V; CL = 1000 pF; RL = 3.0 kOhm; tW = 7µS (for extreme tW = 8µS) | 2 | ||
| Speed of information transmission | ST | 120 | kbps | -40C to 85C; VCC = 4.5 V; CL = 1000 pF; RL = 3.0 kOhm; tW = 7µS (for extreme tW = 8µS) | 2 | ||
| Signal propagation delay time when switching on (off), tPHLR | tPHLR (tPLHR) | 9.7 | µS | 25C; VCC = 4.5 V; CL = 150 pF; VIL = 0 V; VIH = 3.0 V; tLH = tHL 10 ns | 3 | ||
| Signal propagation delay time when switching on (off), tPHLR | tPHLR (tPLHR) | 10 | µS | -40C to 85C; VCC = 4.5 V; CL = 150 pF; VIL = 0 V; VIH = 3.0 V; tLH = tHL 10 ns | 3 |
CAD (KiCad official)
- Symbol:
HT232ARZ - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
ht232arz-etched.step/ht232arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht232arz.step/ht232arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (8 pp, sha256
25ed8bec8c04d2b8, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).