Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2621MM

Texas Instruments · DC-DC Converters · VSSOP-8-0.65mm

LM2621MM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground for the switching regulator power path.
2 EN input Active-low shutdown input; below 0.15 VDD shuts down, above 0.7 VDD enables normal operation.
3 FREQ input Frequency adjustment input; external resistor to VDD sets switching frequency from 300 kHz to 2 MHz.
4 FB input Output voltage feedback input; sets regulated output voltage from 1.24 V to 14 V via external resistor divider.
5 SGND power_in Signal ground for control circuitry.
6 VDD power_in Power supply for internal circuitry; 2.5 V to 5.0 V recommended operating range.
7 BOOT power_in Bootstrap supply for internal MOSFET gate drive; maximum voltage 10 V.
8 SW output Internal MOSFET switch drain output; connects to step-up inductor for switching regulation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LM2621MM
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lm2621mm-etched.step / lm2621mm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2621mm.step / lm2621mm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 4340cacd298ea402, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF