3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGD32F207ZGT6
GigaDevice Semicon Beijing · Other Processors and Microcontrollers (MCUs) · LQFP-144(20x20)
GD32F207ZGT6 from GigaDevice Semicon Beijing, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant GPIO, default PE2, alternate TRACECK and EXMC_A23, remap ENET_MII_TXD3. |
| 2 | PE3 | bidirectional | 5 V tolerant GPIO, default PE3, alternate TRACED0 and EXMC_A19. |
| 3 | PE4 | bidirectional | 5 V tolerant GPIO, default PE4, alternate TRACED1 and EXMC_A20, remap DCI_D4 and TLI_B0. |
| 4 | PE5 | bidirectional | 5 V tolerant GPIO, default PE5, alternate TRACED2 and EXMC_A21, remap TIMER8_CH0, DCI_D6 and TLI_G0. |
| 5 | PE6 | bidirectional | 5 V tolerant GPIO, default PE6, alternate TRACED3 and EXMC_A22, remap TIMER8_CH1, DCI_D7 and TLI_G1. |
| 6 | VBAT | power_in | Backup power supply input for the RTC and backup domain. |
| 7 | PC13-TAMPER-RTC | bidirectional | 5 V tolerant GPIO, default PC13, alternate TAMPER-RTC. |
| 8 | PC14-OSC32IN | bidirectional | GPIO, default PC14, alternate OSC32IN for the 32.768 kHz low speed crystal input. |
| 9 | PC15-OSC32OUT | bidirectional | GPIO, default PC15, alternate OSC32OUT for the 32.768 kHz low speed crystal output. |
| 10 | PF0 | bidirectional | 5 V tolerant GPIO, default PF0, alternate EXMC_A0, remap I2C1_SDA. |
| 11 | PF1 | bidirectional | 5 V tolerant GPIO, default PF1, alternate EXMC_A1, remap I2C1_SCL. |
| 12 | PF2 | bidirectional | 5 V tolerant GPIO, default PF2, alternate EXMC_A2, remap I2C1_SMBA. |
| 13 | PF3 | bidirectional | 5 V tolerant GPIO, default PF3, alternate EXMC_A3 and ADC2_IN9. |
| 14 | PF4 | bidirectional | 5 V tolerant GPIO, default PF4, alternate EXMC_A4 and ADC2_IN14. |
| 15 | PF5 | bidirectional | 5 V tolerant GPIO, default PF5, alternate EXMC_A5 and ADC2_IN15. |
| 16 | VSS_5 | power_in | Ground supply pin for the digital domain. |
| 17 | VDD_5 | power_in | Digital supply pin for the I/O and core. |
| 18 | PF6 | bidirectional | GPIO, default PF6, alternate ADC2_IN4 and EXMC_NIORD, remap TIMER9_CH0 and UART6_RX. |
| 19 | PF7 | bidirectional | GPIO, default PF7, alternate ADC2_IN5 and EXMC_NREG, remap TIMER10_CH0 and UART6_TX. |
| 20 | PF8 | bidirectional | GPIO, default PF8, alternate ADC2_IN6 and EXMC_NIOWR, remap TIMER12_CH0. |
| 21 | PF9 | bidirectional | GPIO, default PF9, alternate ADC2_IN7 and EXMC_CD, remap TIMER13_CH0. |
| 22 | PF10 | bidirectional | GPIO, default PF10, alternate ADC2_IN8 and EXMC_INTR, remap DCI_D11 and TLI_DE. |
| 23 | OSCIN | input | High speed crystal oscillator input, remappable to PD0 or PH0. |
| 24 | OSCOUT | output | High speed crystal oscillator output, remappable to PD1 or PH1. |
| 25 | NRST | input | Active-low reset input for the MCU. |
| 26 | PC0 | bidirectional | GPIO, default PC0, alternate ADC012_IN10, remap EXMC_SDNWE. |
| 27 | PC1 | bidirectional | GPIO, default PC1, alternate ADC012_IN11 and ENET_MDC. |
| 28 | PC2 | bidirectional | GPIO, default PC2, alternate ADC012_IN12 and ENET_MII_TXD2, remap EXMC_SDNE0 and SPI1_MISO. |
| 29 | PC3 | bidirectional | GPIO, default PC3, alternate ADC012_IN13 and ENET_MII_TX_CLK, remap EXMC_SDCKE0, SPI1_MOSI and I2S1_SD. |
| 30 | VSSA | power_in | Analog ground supply for the ADC and DAC. |
| 31 | VREF- | power_in | Negative reference voltage input for the ADC. |
| 32 | VREF+ | power_in | Positive reference voltage input for the ADC. |
| 33 | VDDA | power_in | Analog supply for the ADC, DAC and related analog blocks. |
| 34 | PA0-WKUP | bidirectional | GPIO, default PA0, alternate WKUP wakeup input, ADC012_IN0, USART1_CTS and TIMER1_CH0, remap UART3_TX. |
| 35 | PA1 | bidirectional | GPIO, default PA1, alternate USART1_RTS, ADC012_IN1 and TIMER1_CH1, remap UART3_RX. |
| 36 | PA2 | bidirectional | GPIO, default PA2, alternate USART1_TX, ADC012_IN2 and TIMER1_CH2, plus ENET_MDIO and SPI0_IO3. |
| 37 | PA3 | bidirectional | GPIO, default PA3, alternate USART1_RX, ADC012_IN3 and TIMER1_CH3, remap TLI_B5. |
| 38 | VSS_4 | power_in | Ground supply pin for the digital domain. |
| 39 | VDD_4 | power_in | Digital supply pin for the I/O and core. |
| 40 | PA4 | bidirectional | GPIO, default PA4, alternate SPI0_NSS, USART1_CK, DAC_OUT0 and ADC01_IN4, remap SPI2_NSS and I2S2_WS. |
| 41 | PA5 | bidirectional | GPIO, default PA5, alternate SPI0_SCK, ADC01_IN5 and DAC_OUT1, remap TIMER1_CH0. |
| 42 | PA6 | bidirectional | GPIO, default PA6, alternate SPI0_MISO, ADC01_IN6 and TIMER2_CH0, remap TIMER0_BRKIN and TLI_G2. |
| 43 | PA7 | bidirectional | GPIO, default PA7, alternate SPI0_MOSI, ADC01_IN7 and TIMER2_CH1, remap TIMER0_CH0_ON. |
| 44 | PC4 | bidirectional | GPIO, default PC4, alternate ADC01_IN14 and ENET_MII_RXD0 or ENET_RMII_RXD0. |
| 45 | PC5 | bidirectional | GPIO, default PC5, alternate ADC01_IN15 and ENET_MII_RXD1 or ENET_RMII_RXD1. |
| 46 | PB0 | bidirectional | GPIO, default PB0, alternate ADC01_IN8, TIMER2_CH2 and ENET_MII_RXD2, remap TIMER0_CH1_ON and TLI_R3. |
| 47 | PB1 | bidirectional | GPIO, default PB1, alternate ADC01_IN9, TIMER2_CH3 and ENET_MII_RXD3, remap TIMER0_CH2_ON and TLI_R6. |
| 48 | PB2 | bidirectional | 5 V tolerant GPIO, default PB2, also used as BOOT1. |
| 49 | PF11 | bidirectional | 5 V tolerant GPIO, default PF11, alternate EXMC_NIOS16, DCI_D12 and EXMC_SDNRAS. |
| 50 | PF12 | bidirectional | 5 V tolerant GPIO, default PF12, alternate EXMC_A6. |
| 51 | VSS_6 | power_in | Ground supply pin for the digital domain. |
| 52 | VDD_6 | power_in | Digital supply pin for the I/O and core. |
| 53 | PF13 | bidirectional | 5 V tolerant GPIO, default PF13, alternate EXMC_A7. |
| 54 | PF14 | bidirectional | 5 V tolerant GPIO, default PF14, alternate EXMC_A8. |
| 55 | PF15 | bidirectional | 5 V tolerant GPIO, default PF15, alternate EXMC_A9. |
| 56 | PG0 | bidirectional | 5 V tolerant GPIO, default PG0, alternate EXMC_A10. |
| 57 | PG1 | bidirectional | 5 V tolerant GPIO, default PG1, alternate EXMC_A11. |
| 58 | PE7 | bidirectional | 5 V tolerant GPIO, default PE7, alternate EXMC_D4 and UART6_RX, remap TIMER0_ETI. |
| 59 | PE8 | bidirectional | 5 V tolerant GPIO, default PE8, alternate EXMC_D5 and UART6_TX, remap TIMER0_CH0_ON. |
| 60 | PE9 | bidirectional | 5 V tolerant GPIO, default PE9, alternate EXMC_D6, remap TIMER0_CH0. |
| 61 | VSS_7 | power_in | Ground supply pin for the digital domain. |
| 62 | VDD_7 | power_in | Digital supply pin for the I/O and core. |
| 63 | PE10 | bidirectional | 5 V tolerant GPIO, default PE10, alternate EXMC_D7, remap TIMER0_CH1_ON. |
| 64 | PE11 | bidirectional | 5 V tolerant GPIO, default PE11, alternate EXMC_D8, remap TIMER0_CH1 and TLI_G3. |
| 65 | PE12 | bidirectional | 5 V tolerant GPIO, default PE12, alternate EXMC_D9, remap TIMER0_CH2_ON and TLI_B4. |
| 66 | PE13 | bidirectional | 5 V tolerant GPIO, default PE13, alternate EXMC_D10, remap TIMER0_CH2 and TLI_DE. |
| 67 | PE14 | bidirectional | 5 V tolerant GPIO, default PE14, alternate EXMC_D11, remap TIMER0_CH3 and TLI_PIXCLK. |
| 68 | PE15 | bidirectional | 5 V tolerant GPIO, default PE15, alternate EXMC_D12, remap TIMER0_BRKIN and TLI_R7. |
| 69 | PB10 | bidirectional | 5 V tolerant GPIO, default PB10, alternate I2C1_SCL, USART2_TX and ENET_MII_RX_ER, remap TIMER1_CH2 and SPI1_SCK. |
| 70 | PB11 | bidirectional | 5 V tolerant GPIO, default PB11, alternate I2C1_SDA, USART2_RX and ENET_MII_TX_EN, remap TIMER1_CH3 and TLI_G5. |
| 71 | VSS_1 | power_in | Ground supply pin for the digital domain. |
| 72 | VDD_1 | power_in | Digital supply pin for the I/O and core. |
| 73 | PB12 | bidirectional | 5 V tolerant GPIO, default PB12, alternate SPI1_NSS, I2C1_SMBA, USART2_CK and CAN1_RX, plus ENET_MII_TXD0. |
| 74 | PB13 | bidirectional | 5 V tolerant GPIO, default PB13, alternate SPI1_SCK, USART2_CTS and CAN1_TX, plus ENET_MII_TXD1. |
| 75 | PB14 | bidirectional | 5 V tolerant GPIO, default PB14, alternate SPI1_MISO, USART2_RTS and TIMER11_CH0. |
| 76 | PB15 | bidirectional | 5 V tolerant GPIO, default PB15, alternate SPI1_MOSI, I2S1_SD and TIMER11_CH1. |
| 77 | PD8 | bidirectional | 5 V tolerant GPIO, default PD8, alternate EXMC_D13, remap USART2_TX and ENET_MII_RX_DV. |
| 78 | PD9 | bidirectional | 5 V tolerant GPIO, default PD9, alternate EXMC_D14, remap USART2_RX and ENET_MII_RXD0. |
| 79 | PD10 | bidirectional | 5 V tolerant GPIO, default PD10, alternate EXMC_D15, remap USART2_CK, ENET_MII_RXD1 and TLI_B3. |
| 80 | PD11 | bidirectional | 5 V tolerant GPIO, default PD11, alternate EXMC_A16, remap USART2_CTS and ENET_MII_RXD2. |
| 81 | PD12 | bidirectional | 5 V tolerant GPIO, default PD12, alternate EXMC_A17, remap TIMER3_CH0 and USART2_RTS. |
| 82 | PD13 | bidirectional | 5 V tolerant GPIO, default PD13, alternate EXMC_A18, remap TIMER3_CH1. |
| 83 | VSS_8 | power_in | Ground supply pin for the digital domain. |
| 84 | VDD_8 | power_in | Digital supply pin for the I/O and core. |
| 85 | PD14 | bidirectional | 5 V tolerant GPIO, default PD14, alternate EXMC_D0, remap TIMER3_CH2. |
| 86 | PD15 | bidirectional | 5 V tolerant GPIO, default PD15, alternate EXMC_D1, remap TIMER3_CH3. |
| 87 | PG2 | bidirectional | 5 V tolerant GPIO, default PG2, alternate EXMC_A12. |
| 88 | PG3 | bidirectional | 5 V tolerant GPIO, default PG3, alternate EXMC_A13. |
| 89 | PG4 | bidirectional | 5 V tolerant GPIO, default PG4, alternate EXMC_A14 and EXMC_BA0. |
| 90 | PG5 | bidirectional | 5 V tolerant GPIO, default PG5, alternate EXMC_A15 and EXMC_BA1. |
| 91 | PG6 | bidirectional | 5 V tolerant GPIO, default PG6, alternate EXMC_INT1, remap DCI_D12 and TLI_R7. |
| 92 | PG7 | bidirectional | 5 V tolerant GPIO, default PG7, alternate EXMC_INT2 and DCI_D13, remap USART5_CK and TLI_PIXCLK. |
| 93 | PG8 | bidirectional | 5 V tolerant GPIO, default PG8, alternate EXMC_SDCLK and USART5_RTS, remap ENET_PPS_OUT. |
| 94 | VSS_9 | power_in | Ground supply pin for the digital domain. |
| 95 | VDD_9 | power_in | Digital supply pin for the I/O and core. |
| 96 | PC6 | bidirectional | 5 V tolerant GPIO, default PC6, alternate I2S1_MCK, TIMER7_CH0, SDIO_D6 and USART5_TX, remap TIMER2_CH0, DCI_D0 and TLI_HSYNC. |
| 97 | PC7 | bidirectional | 5 V tolerant GPIO, default PC7, alternate I2S2_MCK, TIMER7_CH1, SDIO_D7 and USART5_RX, remap TIMER2_CH1, DCI_D1 and TLI_G6. |
| 98 | PC8 | bidirectional | 5 V tolerant GPIO, default PC8, alternate TIMER7_CH2, SDIO_D0, DCI_D2 and USART5_CK, remap TIMER2_CH2. |
| 99 | PC9 | bidirectional | 5 V tolerant GPIO, default PC9, alternate TIMER7_CH3, SDIO_D1, DCI_D3 and CK_OUT1, remap TIMER2_CH3 and I2C2_SDA. |
| 100 | PA8 | bidirectional | 5 V tolerant GPIO, default PA8, alternate USART0_CK, TIMER0_CH0, CK_OUT0, VCORE and USBFS_SOF, remap TLI_R6 and I2C2_SCL. |
| 101 | PA9 | bidirectional | 5 V tolerant GPIO, default PA9, alternate USART0_TX, TIMER0_CH1, USBFS_VBUS and DCI_D0, remap I2C2_SMBAI. |
| 102 | PA10 | bidirectional | 5 V tolerant GPIO, default PA10, alternate USART0_RX, TIMER0_CH2, USBFS_ID and DCI_D1. |
| 103 | PA11 | bidirectional | 5 V tolerant GPIO, default PA11, alternate USART0_CTS, CAN0_RX, USBFS_DM and TIMER0_CH3, remap TLI_R4. |
| 104 | PA12 | bidirectional | 5 V tolerant GPIO, default PA12, alternate USART0_RTS, USBFS_DP, CAN0_TX and TIMER0_ETI, remap TLI_R5. |
| 105 | PA13 | bidirectional | 5 V tolerant GPIO, default JTMS and SWDIO debug pin, remappable to PA13. |
| 106 | NC | unconnected | Not connected pin. |
| 107 | VSS_2 | power_in | Ground supply pin for the digital domain. |
| 108 | VDD_2 | power_in | Digital supply pin for the I/O and core. |
| 109 | PA14 | bidirectional | 5 V tolerant GPIO, default JTCK and SWCLK debug pin, remappable to PA14. |
| 110 | PA15 | bidirectional | 5 V tolerant GPIO, default JTDI, alternate SPI2_NSS and I2S2_WS, remap TIMER1_CH0, TIMER1_ETI and SPI0_NSS. |
| 111 | PC10 | bidirectional | 5 V tolerant GPIO, default PC10, alternate UART3_TX, SDIO_D2 and DCI_D8, remap USART2_TX, SPI2_SCK and I2S2_CK. |
| 112 | PC11 | bidirectional | 5 V tolerant GPIO, default PC11, alternate UART3_RX, SDIO_D3 and DCI_D4, remap USART2_RX and SPI2_MISO. |
| 113 | PC12 | bidirectional | 5 V tolerant GPIO, default PC12, alternate UART4_TX, SDIO_CK and DCI_D9, remap USART2_CK, SPI2_MOSI and I2S2_SD. |
| 114 | PD0 | bidirectional | 5 V tolerant GPIO, default PD0, alternate EXMC_D2, remap CAN0_RX and OSCIN. |
| 115 | PD1 | bidirectional | 5 V tolerant GPIO, default PD1, alternate EXMC_D3, remap CAN0_TX and OSCOUT. |
| 116 | PD2 | bidirectional | 5 V tolerant GPIO, default PD2, alternate TIMER2_ETI, UART4_RX, SDIO_CMD and DCI_D11. |
| 117 | PD3 | bidirectional | 5 V tolerant GPIO, default PD3, alternate EXMC_CLK, remap USART1_CTS, DCI_D5, TLI_G7, SPI1_SCK and I2S1_CK. |
| 118 | PD4 | bidirectional | 5 V tolerant GPIO, default PD4, alternate EXMC_NOE, remap USART1_RTS. |
| 119 | PD5 | bidirectional | 5 V tolerant GPIO, default PD5, alternate EXMC_NWE, remap USART1_TX. |
| 120 | VSS_10 | power_in | Ground supply pin for the digital domain. |
| 121 | VDD_10 | power_in | Digital supply pin for the I/O and core. |
| 122 | PD6 | bidirectional | 5 V tolerant GPIO, default PD6, alternate EXMC_NWAIT, remap USART1_RX, DCI_D10, TLI_B2, SPI2_MOSI and I2S2_SD. |
| 123 | PD7 | bidirectional | 5 V tolerant GPIO, default PD7, alternate EXMC_NE0 and EXMC_NCE1, remap USART1_CK. |
| 124 | PG9 | bidirectional | 5 V tolerant GPIO, default PG9, alternate EXMC_NE1 and EXMC_NCE2, remap DCI_VSYNC and USART5_RX. |
| 125 | PG10 | bidirectional | 5 V tolerant GPIO, default PG10, alternate EXMC_NCE3_0 and EXMC_NE2, remap DCI_D2, TLI_G3 and TLI_B2. |
| 126 | PG11 | bidirectional | 5 V tolerant GPIO, default PG11, alternate EXMC_NCE3_1, remap DCI_D3, TLI_B3, ENET_MII_TX_EN and ENET_RMII_TX_EN. |
| 127 | PG12 | bidirectional | 5 V tolerant GPIO, default PG12, alternate EXMC_NE3, remap USART5_RTS, TLI_B4 and TLI_B1. |
| 128 | PG13 | bidirectional | 5 V tolerant GPIO, default PG13, alternate EXMC_A24, remap USART5_CTS, ENET_MII_TXD0 and ENET_RMII_TXD0. |
| 129 | PG14 | bidirectional | 5 V tolerant GPIO, default PG14, alternate EXMC_A25, remap USART5_TX, ENET_MII_TXD1 and ENET_RMII_TXD1. |
| 130 | VSS_11 | power_in | Ground supply pin for the digital domain. |
| 131 | VDD_11 | power_in | Digital supply pin for the I/O and core. |
| 132 | PG15 | bidirectional | 5 V tolerant GPIO, default PG15, alternate EXMC_SDNCAS and USART5_CTS, remap DCI_D13. |
| 133 | PB3 | bidirectional | 5 V tolerant GPIO, default JTDO, alternate SPI2_SCK and I2S2_CK, remap TRACESWO, TIMER1_CH1 and SPI0_SCK. |
| 134 | PB4 | bidirectional | 5 V tolerant GPIO, default JNTRST, alternate SPI2_MISO, remap TIMER2_CH0 and SPI0_MISO. |
| 135 | PB5 | bidirectional | GPIO, default PB5, alternate I2C0_SMBA, SPI2_MOSI, I2S2_SD, ENET_PPS_OUT and DCI_D10, remap TIMER2_CH1, SPI0_MOSI, CAN1_RX and EXMC_SDCKE1. |
| 136 | PB6 | bidirectional | 5 V tolerant GPIO, default PB6, alternate I2C0_SCL, TIMER3_CH0 and DCI_D5, remap USART0_TX, CAN1_TX, EXMC_SDNE1 and SPI0_IO3. |
| 137 | PB7 | bidirectional | 5 V tolerant GPIO, default PB7, alternate I2C0_SDA, TIMER3_CH1, EXMC_NL and DCI_VSYNC, remap USART0_RX and SPI0_IO4. |
| 138 | BOOT0 | input | Boot mode selection input sampled at reset. |
| 139 | PB8 | bidirectional | 5 V tolerant GPIO, default PB8, alternate TIMER3_CH2, TIMER9_CH0, ENET_MII_TXD3, SDIO_D4 and DCI_D6, remap I2C0_SCL, CAN0_RX and TLI_B6. |
| 140 | PB9 | bidirectional | 5 V tolerant GPIO, default PB9, alternate TIMER3_CH3, TIMER10_CH0, SDIO_D5 and DCI_D7, remap I2C0_SDA, CAN0_TX, TLI_B7, SPI1_NSS and I2S1_WS. |
| 141 | PE0 | bidirectional | 5 V tolerant GPIO, default PE0, alternate TIMER3_ETI, EXMC_NBL0 and UART7_RX, remap DCI_D2. |
| 142 | PE1 | bidirectional | 5 V tolerant GPIO, default PE1, alternate EXMC_NBL1 and UART7_TX, remap DCI_D3. |
| 143 | VSS_3 | power_in | Ground supply pin for the digital domain. |
| 144 | VDD_3 | power_in | Digital supply pin for the I/O and core. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | LQFP-144(20x20) |
| Category | Embedded Processors & Controllers |
| Pins | 144 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum current for GPIO pins | IIO | 25 | mA | 62 | |||
| Injected current on 5V tolerant pin | IINJ | -5 | 5 | mA | 62 | ||
| Injected current on other I/O | IINJ | -5 | 5 | mA | 62 | ||
| Injected current on all I/O | ∑IINJ | -25 | 25 | mA | 62 | ||
| Input voltage on other I/O | VIN | 4 | V | 62 | |||
| Operating temperature range | TA | -40 | 85 | °C | 62 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 62 | ||
| Maximum junction temperature | TJ | 125 | °C | 62 | |||
| Supply voltage | VDD | 2.6 | 3.3 | 3.6 | V | 62 | |
| Analog supply voltage | VDDA | 2.6 | 3.3 | 3.6 | V | Same as VDD | 62 |
| Battery supply voltage | VBAT | 1.8 | 3.6 | V | 62 | ||
| Power on reset threshold | VPOR | 2.32 | 2.4 | 2.48 | V | 64 | |
| Power down reset threshold | VPDR | 1.72 | 1.8 | 1.88 | V | 64 | |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 5000 | V | TA=25 °C; JESD22-A114 | 64 | ||
| Electrostatic discharge voltage (charge device model) | VESD(CDM) | 500 | V | TA=25 °C; JESD22-C101 | 65 | ||
| Static latch-up I-test | LU | -100 | 100 | mA | TA=25 °C; JESD78 | 65 | |
| Vsupply over voltage | 5.4 | V | 65 | ||||
| High speed external oscillator (HXTAL) frequency | fHXTAL | 4 | 8 | 32 | MHz | VDD=3.3V | 65 |
| Recommended load capacitance on OSCIN and OSCOUT | CHXTAL | 20 | 30 | pF | 65 | ||
| HXTAL oscillator duty cycle | DHXTAL | 48 | 50 | 52 | % | 65 | |
| HXTAL oscillator operating current | IDDHXTAL | 1.2 | μA | VDD=3.3V, TA=25°C | 65 | ||
| Low speed external oscillator (LXTAL) frequency | fLXTAL | 32.768 | 1000 | KHz | VDD=VBAT=3.3V | 65 | |
| Recommended load capacitance on OSC32IN and OSC32OUT | CLXTAL | 8 | 10 | 15 | pF | 65 | |
| LXTAL oscillator duty cycle | DLXTAL | 48 | 50 | 52 | % | 65 | |
| IRC8M oscillator frequency accuracy, factory-trimmed | ACCIRC8M | -2.5 | 1.5 | % | VDD=3.3V, TA=-40°C ~+105°C | 66 | |
| IRC8M oscillator frequency accuracy, factory-trimmed | ACCIRC8M | -1.2 | 1.2 | % | VDD=3.3V, TA=0°C ~ +85°C | 66 | |
| IRC8M oscillator frequency accuracy, factory-trimmed | ACCIRC8M | -1 | 1 | % | VDD=3.3V, TA=25°C | 66 | |
| IRC8M oscillator duty cycle | DIRC8M | 48 | 50 | 52 | % | VDD=3.3V, fIRC8M=8MHz | 66 |
| IRC8M oscillator operating current | IDDIRC8M | 80 | 100 | μA | VDD=3.3V, fIRC8M=8MHz | 66 | |
| Low speed internal oscillator (IRC40K) frequency | fIRC40K | 30 | 40 | 60 | KHz | VDD=VBAT=3.3V, TA=-40°C ~ +85°C | 66 |
| IRC40K oscillator operating current | IDDIRC40K | 1 | 2 | μA | VDD=VBAT=3.3V, TA=25°C | 66 | |
| PLL input clock frequency | fPLLIN | 1 | 8 | 25 | MHz | 66 | |
| PLL output clock frequency | fPLL | 16 | 120 | MHz | 66 | ||
| Number of guaranteed program/erase cycles before failure (Endurance) | PECYC | 100 | kcycles | TA=-40°C ~ +85°C | 66 | ||
| Data retention time | tRET | 20 | years | TA=125°C | 66 | ||
| Word programming time | tPROG | 200 | 400 | us | TA=-40°C ~ +85°C | 67 | |
| Page erase time | tERASE | 60 | 100 | 450 | ms | TA=-40°C ~ +85°C | 67 |
| Mass erase time | tMERASE | 3.2 | 9.6 | s | TA=-40°C ~ +85°C | 67 | |
| Standard IO Low level input voltage | VIL | -0.3 | 0.95 | V | VDD=2.6V | 67 | |
| 5V-tolerant IO Low level input voltage | VIL | -0.3 | 0.9 | V | VDD=2.6V | 67 | |
| Standard IO High level input voltage | VIH | 1.2 | 4 | V | VDD=2.6V | 67 | |
| 5V-tolerant IO High level input voltage | VIH | 1.5 | 5.5 | V | VDD=2.6V | 67 | |
| Low level output voltage | VOL | 0.2 | V | VDD=2.6V | 67 | ||
| High level output voltage | VOH | 2.3 | V | VDD=2.6V | 67 | ||
| Internal pull-up resistor | RPU | 30 | 40 | 50 | kΩ | VIN=VSS | 67 |
| Internal pull-down resistor | RPD | 30 | 40 | 50 | kΩ | VIN=VDD | 67 |
| ADC input voltage range | VIN | 0 | V | 67 | |||
| ADC clock | fADC | 0.6 | 28 | MHz | 67 | ||
| Sampling rate | fS | 2 | MHz | 12-bit | 67 | ||
| Input sampling switch resistance | RADC | 0.45 | kΩ | 67 | |||
| Startup time | tSU | 1 | μs | 67 | |||
| Load resistance | RLOAD | 5 | kΩ | Resistive load vs. VSSA with buffer ON | 68 | ||
| Load capacitance | CLOAD | 50 | pF | No pin/pad capacitance included | 68 | ||
| Differential non-linearity error | DNE | -3 | 3 | LSB | DAC in 12-bit | 68 | |
| Integral non-linearity | INL | -4 | 4 | LSB | DAC in 12-bit | 68 | |
| Offset error | Offset | -12 | 12 | LSB | DAC in 12-bit, VREF+ = 3.6 V | 68 | |
| Gain error | GE | -0.5 | 0.5 | % | DAC in 12-bit | 68 | |
| SCL clock frequency | fSCL | 0 | 100 | KHz | Standard mode | 68 | |
| SCL clock frequency | fSCL | 0 | 400 | KHz | Fast mode | 68 | |
| SCK clock frequency | fSCK | 30 | MHz | 69 |
CAD (KiCad official)
- Symbol:
GD32F207ZGT6 - Footprint:
Package_QFP:LQFP-144_20x20mm_P0.5mm - 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files:
gd32f207zgt6-etched.step/gd32f207zgt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gd32f207zgt6.step/gd32f207zgt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (74 pp, sha256
9b35ed095e81f526, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).