Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

GT8022M8

GTIC · Operational Amplifier · MSOP-8

GT8022M8 from GTIC, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output of channel A, which swings to within 30 mV of the supply rails at RL=1kΩ.
2 -INA input Inverting input of channel A.
3 +INA input Noninverting input of channel A.
4 V- power_in Negative (lowest) power supply.
5 +INB input Noninverting input of channel B.
6 -INB input Inverting input of channel B.
7 OUTB output Output of channel B, which swings to within 30 mV of the supply rails at RL=1kΩ.
8 V+ power_in Positive (highest) power supply, with total supply range of 2.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer GTIC
Package MSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage 6.5 V VS=(V+)-(V-) 7
Maximum Junction Temperature -55 150 °C 7
Storage Temperature Range -55 150 °C 7
Electrostatic Discharge Human-body Model (HBM) V(ESD) 5 kV HBM 7
Electrostatic Discharge Charged Device Model (CDM) V(ESD) 2 kV CDM 7
Single-Supply Operating Voltage VCC 2.5 5.5 V Single-Supply, VS=(V+)-(V-) 7
Dual-Supply Operating Voltage VCC 1.25 2.75 V Dual-Supply, VS=(V+)-(V-), ±1.25 V to ±2.75 V 7
Operating Temperature TA -40 125 °C Operating free-air temperature range 7
Thermal Resistance Junction-to-Ambient MSOP8 θJA 210 °C/W MSOP8 7
Thermal Resistance Junction-to-Case MSOP8 θJC 45 °C/W MSOP8 7
Operating Voltage VS 2.5 5.5 V FULL (-40°C to +125°C) 8
Quiescent Current (per Amplifier) IQ 5.5 mA TA=-40°C to +125°C 8
Quiescent Current (per Amplifier) IQ 3 mA TA=25°C, VCC=5V, IO=0 8
Power-Supply Rejection Ratio PSRR 70 95 dB VCC=2.5V to 5.5V, VCM=(V-)+0.5V, +25°C 8
Input Bias Current IB -10 1 10 pA VCC=5V, +25°C 8
Input Offset Current IOS -10 1 10 pA VCC=5V, +25°C 8
Input Offset Voltage VOS -6.5 1.5 6.5 mV VCC=5V, +25°C 8
Input Offset Voltage over Full Temperature VOS -7 7 mV VCC=5V, FULL 8
Input Offset Voltage vs Temperature dVOS/dT 4 μV/°C VCC=5V, FULL 8
Common-Mode Voltage VCM -0.3 3.6 V VCC=5V, FULL 8
Common-Mode Rejection Ratio CMRR 66 85 dB VCC=5.5V, -0.1V < VCM < 3.5V, +25°C 8
Input Voltage Noise Density en 4 nV/√Hz f=1MHz, +25°C 8
Open-Loop Gain AOL 90 105 dB VCC=5V, VO=4.8V, RL=1kΩ, FULL 8
Open-Loop Gain AOL 85 90 dB VCC=5V, VO=4.7V, RL=150Ω, FULL 8
Output Voltage Swing From Rail SWING 30 mV RL=1kΩ, 2.5V to 5.5V, FULL 9
Output Current Source IO_SOURCE 100 mA VCC=5V, +25°C 9
Output Current Sink IO_SINK 100 mA VCC=5V, +25°C 9
Small-Signal Bandwidth f−3dB 50 MHz G=+1, VO=100mVPP, RF=25Ω, 5V, +25°C 9
Small-Signal Bandwidth f−3dB 30 MHz G=+2, VO=100mVPP, RF=1kΩ, 5V, +25°C 9
Small-Signal Bandwidth f−3dB 9 MHz G=+5, VO=100mVPP, RF=4kΩ, 5V, +25°C 9
Small-Signal Bandwidth f−3dB 4 MHz G=+10, VO=100mVPP, RF=9kΩ, 5V, +25°C 9
Slew Rate SR 75 V/μs VCC=5V, G=+2, 4-V Step Output, 5V, +25°C 9

CAD (KiCad official)

  • Symbol: GT8022M8
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: gt8022m8-etched.step / gt8022m8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gt8022m8.step / gt8022m8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GTIC datasheet (20 pp, sha256 7c6f7d5f54d8df88, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF