Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC5211-LXYM6-TR

Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-6

MIC5211-LXYM6-TR from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENA input Enable/Shutdown A is a CMOS-compatible input: logic high enables regulator A, and logic low or open shuts it down.
2 GND power_in Ground pin for the device.
3 ENB input Enable/Shutdown B is a CMOS-compatible input: logic high enables regulator B, and logic low or open shuts it down.
4 OUTB power_out Regulator Output B; the datasheet gives no further limit for this pin on this page.
5 IN power_in Supply Input for both regulators; the operating range is 2.5V to 16V per the Operating Ratings on page 3.
6 OUTA power_out Regulator Output A; the datasheet gives no further limit for this pin on this page.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage variation from nominal VOUT (accuracy) VO -3 3 % VIN = VOUT + 1V; IL = 1mA; CL = 0.1µF; VEN ≥ 2.0V; TJ = 25°C; unless noted (table header) 3
Accuracy (wider limit, bold values -40°C to +125°C per table header) VO -4 4 % Full temperature range per table header (bold); VIN = VOUT + 1V; IL = 1mA; CL = 0.1µF; VEN ≥ 2.0V 3
Line regulation ΔVO/VO 0.008 0.3 % VIN = VOUT +1V to 16V 3
Line regulation (second max value) ΔVO/VO 0.5 % VIN = VOUT +1V to 16V 3
Load regulation ΔVO/VO 0.08 0.3 % IL = 0.1mA to 50mA, Note 6 3
Load regulation (second max value) ΔVO/VO 0.5 % IL = 0.1mA to 50mA, Note 6 3
Dropout voltage VIN, VO 200 450 mV IL = 20mA; Note 7 3
Dropout voltage VIN, VO 250 500 mV IL = 50mA; Note 7 3
Quiescent current (shutdown) IQ 0.01 10 µA VEN ≤ 0.4V (shutdown) 3
Ground pin current (active) IGND 225 450 µA IL = 20mA (active); Note 8 3
Ground pin current (active) IGND 750 1200 µA IL = 50mA (active) 3
Current limit ILIMIT 140 250 mA VOUT = 0V 3
Enable input voltage, logic low (off) VIL 0.6 V logic low (off) 3
Enable input voltage, logic high (on) VIH 2 V logic high (on) 3
Enable input current (low) IIL 0.01 1 µA VIL ≤ 0.6V 3
Enable input current (high) IIH 3 50 µA VIH ≥ 2.0V 3
Output voltage temperature coefficient ΔVO/ΔT 50 200 ppm/°C Note 5 (worst-case change over full temperature range) 3
Supply input voltage (absolute maximum) VIN -20 20 V 3
Enable input voltage (absolute maximum) VEN -20 20 V 3
Storage temperature range TSTG -60 150 °C 3
Lead temperature (soldering, 5 sec.) 260 °C Soldering, 5 sec. 3
Supply input voltage (operating) VIN 2.5 16 V 3
Enable input voltage (operating) VEN 0 16 V 3
Junction temperature (operating) TJ -40 125 °C Except 1.8V variant (applies to this 3.3V/5.0V part) 3
Junction-to-ambient thermal resistance θJA 220 °C/W SOT-23-6 mounted on PCB, minimum footprint (Note 4) 3

CAD (KiCad official)

  • Symbol: MIC5211-LXYM6-TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mic5211-lxym6-tr-etched.step / mic5211-lxym6-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5211-lxym6-tr.step / mic5211-lxym6-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (9 pp, sha256 d37d89788bfae58d, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF