Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HCPL-2201-000E

Broadcom Limited · Logic Output Optocoupler · DIP-8

HCPL-2201-000E from Broadcom Limited, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Pin 1 is marked NC (no internal connection) on the functional diagram and should be left unconnected.
2 ANODE input LED anode input; the input current IF(ON) must be 1.6 mA to 5 mA and VF(OFF) must not exceed 0.8 V.
3 CATHODE passive LED cathode; average forward input current is limited to 10 mA per the absolute maximum ratings.
4 NC unconnected Pin 4 is marked NC (no internal connection) on the functional diagram and should be left unconnected.
5 GND power_in Ground reference for the output stage; a 0.1-µF bypass capacitor must be connected between pins 5 and 8.
6 NC unconnected Pin 7 is marked NC (no internal connection) on the functional diagram and should be left unconnected.
7 VO output Totem-pole logic output with a voltage range of -0.5 V to 20 V and an average output current limit of 25 mA.
8 VCC power_in Supply voltage from 4.5 V to 20 V; a 0.1-µF bypass capacitor must be connected between pins 8 and 5.

Key specifications

Parameter Value
Manufacturer Broadcom Limited
Package DIP-8
Category Optocoupler
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic Low Output Voltage VOL 0.5 V IOL = 6.4 mA (4 TTL Loads) 12
Logic High Output Voltage VOH 2.4 V IOH = -2.6 mA 12
Logic High Output Voltage VOH 2.7 V IOH = -0.4 mA 12
Output Leakage Current IOHH 100 µA VO = 5.5V; IF = 5 mA 12
Output Leakage Current IOHH 500 µA VO = 20V; IF = 5 mA 12
Logic Low Supply Current ICCL 3.7 6 mA VCC = 5.5V; VF = 0V, IO = Open 12
Logic Low Supply Current ICCL 4.3 7 mA VCC = 20V; VF = 0V, IO = Open 12
Logic High Supply Current ICCH 2.4 4 mA VCC = 5.5V; IF = 5 mA, IO = Open 12
Logic High Supply Current ICCH 2.7 5 mA VCC = 20V; IF = 5 mA, IO = Open 12
Logic Low Short Circuit Output Current IOSL 15 mA VO = VCC = 5.5V; VF = 0V 12
Logic Low Short Circuit Output Current IOSL 20 mA VO = VCC = 20V; VF = 0V 12
Logic High Short Circuit Output Current IOSH -10 mA VCC = 5.5V; VO = GND; IF = 5 mA 12
Logic High Short Circuit Output Current IOSH -20 mA VCC = 20V; VO = GND; IF = 5 mA 12
Input Forward Voltage VF 1.5 1.7 V TA = 25°C; IF = 5 mA 12
Input Forward Voltage VF 1.85 V IF = 5 mA 12
Input Reverse Breakdown Voltage BVR 5 V IR = 10 µA 12
Input Diode Temperature Coefficient ΔVF/ΔTA -1.7 mV/°C IF = 5 mA 12
Input Capacitance CIN 60 pF f = 1 MHz, VF = 0V 12
Propagation Delay Time to Logic Low Output Level tPHL 150 ns Without Peaking Capacitor 13
Propagation Delay Time to Logic Low Output Level tPHL 150 300 ns With Peaking Capacitor 13
Propagation Delay Time to Logic High Output Level tPLH 110 ns Without Peaking Capacitor 13
Propagation Delay Time to Logic High Output Level tPLH 90 300 ns With Peaking Capacitor 13
Output Rise Time (10% to 90%) tr 30 ns 13
Output Fall Time (90% to 10%) tf 7 ns 13
Logic High Common Mode Transient Immunity /CMH/ 1000 V/μs /VCM/ = 50V, IF = 1.6 mA, VCC = 5V, TA = 25°C 13
Logic Low Common Mode Transient Immunity /CML/ 1000 V/μs /VCM/ = 50V, VF = 0V, VCC = 5V, TA = 25°C 13
Input-Output Momentary Withstand Voltage VISO 3750 Vrms RH < 50%, t = 1 min. 14
Input-Output Capacitance CI-O 0.6 pF f = 1 MHz 14
Storage Temperature TS -55 125 °C 11
Operating Temperature TA -40 85 °C 11
Average Forward Input Current IF(AVG) 10 mA Each channel 11
Peak Transient Input Current IF(TRAN) 1 A ≤1 µs Pulse Width, 300 pps 11
Reverse Input Voltage VR 5 V 11
Average Output Current IO 25 mA Each channel 11
Supply Voltage VCC 0 20 V 11
Output Voltage VO -0.5 20 V Each channel 11
Total Package Power Dissipation PT 210 mW Derate linearly above 70°C at 4.5 mW/°C 11
Power Supply Voltage VCC 4.5 20 V 11
Forward Input Current (ON) IF(ON) 1.6 5 mA 11
Forward Input Voltage (OFF) VF(OFF) 0.8 V 11
Operating Temperature TA -40 85 °C 11
Junction Temperature TJ -40 125 °C 11
Fan Out N 4 TTL Loads 11

CAD (KiCad official)

  • Symbol: HCPL-2201-000E
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-2201-000e-etched.step / hcpl-2201-000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-2201-000e.step / hcpl-2201-000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom Limited datasheet (22 pp, sha256 ec95d613662edad2, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF