3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTSV622IDT
STMicroelectronics · Operational Amplifier · SO-8
TSV622IDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of amplifier 1, which can swing to within 35 mV of each rail with a 10 kΩ load connected to VCC/2. |
| 2 | In1- | input | Inverting input of amplifier 1, whose common-mode range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |
| 3 | In1+ | input | Non-inverting input of amplifier 1, whose common-mode range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V and whose input current must be limited by a series resistor to 10 mA maximum. |
| 4 | VCC- | power_in | Negative supply rail, used as the network ground reference for all voltages; the supply range is 1.5 to 5.5 V between VCC+ and VCC-. |
| 5 | In2+ | input | Non-inverting input of amplifier 2, whose common-mode range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V and whose input current must be limited by a series resistor to 10 mA maximum. |
| 6 | In2- | input | Inverting input of amplifier 2, whose common-mode range extends from (VCC-) - 0.1 V to (VCC+) + 0.1 V. |
| 7 | Out2 | output | Output of amplifier 2, which can swing to within 35 mV of each rail with a 10 kΩ load connected to VCC/2. |
| 8 | VCC+ | power_in | Positive supply rail; the supply range is 1.5 to 5.5 V and the device is fully specified at 1.8 V, 3.3 V and 5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | 6 | V | 4 | |||
| Input current | Iin | 10 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| ESD HBM (human body model) | ESD | 4 | kV | HBM, 100 pF through 1.5 kΩ | 4 | ||
| ESD MM (machine model) | ESD | 200 | V | MM, 200 pF | 4 | ||
| Supply voltage (operating) | VCC | 1.5 | 5.5 | V | 4 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Offset voltage | Vio | 4 | mV | VCC+ = 1.8 V | 5 | ||
| Offset voltage | Vio | 6 | mV | VCC+ = 1.8 V; TSV62x Tmin < Top < Tmax | 5 | ||
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 1.8 V; Vout = VCC/2 | 5 | |
| Common mode rejection ratio | CMR | 53 | 74 | dB | VCC+ = 1.8 V; 0 V to 1.8 V, Vout = 0.9 V | 5 | |
| Large signal voltage gain | Avd | 78 | 95 | dB | VCC+ = 1.8 V; RL = 10 kΩ, Vout = 0.5 V to 1.3 V | 5 | |
| High level output voltage (VOH = VCC - Vout) | VOH | 5 | 35 | mV | VCC+ = 1.8 V; RL = 10 kΩ | 5 | |
| High level output voltage (VOH = VCC - Vout) | VOH | 50 | mV | VCC+ = 1.8 V; RL = 10 kΩ; Tmin < Top < Tmax | 5 | ||
| Low level output voltage | VOL | 4 | 35 | mV | VCC+ = 1.8 V; RL = 10 kΩ | 5 | |
| Low level output voltage | VOL | 50 | mV | VCC+ = 1.8 V; RL = 10 kΩ; Tmin < Top < Tmax | 5 | ||
| Output sink current | Isink | 6 | 12 | mA | VCC+ = 1.8 V; Vout = 1.8 V | 5 | |
| Output sink current | Isink | 4 | mA | VCC+ = 1.8 V; Vout = 1.8 V; Tmin < Top < Tmax | 5 | ||
| Output source current | Isource | 6 | 10 | mA | VCC+ = 1.8 V; Vout = 0 V | 5 | |
| Output source current | Isource | 4 | mA | VCC+ = 1.8 V; Vout = 0 V; Tmin < Top < Tmax | 5 | ||
| Supply current (per operator) | ICC | 25 | 31 | µA | VCC+ = 1.8 V; No load, Vout = VCC/2 | 5 | |
| Supply current (per operator) | ICC | 33 | µA | VCC+ = 1.8 V; No load, Vout = VCC/2; Tmin < Top < Tmax | 5 | ||
| Gain bandwidth product | GBP | 275 | 340 | kHz | VCC+ = 1.8 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz | 5 | |
| Slew rate | SR | 0.1 | 0.155 | V/µs | VCC+ = 1.8 V; RL = 10 kΩ, CL = 100 pF, Av=1 | 5 | |
| Offset voltage | Vio | 4 | mV | VCC+ = 3.3 V | 7 | ||
| Offset voltage | Vio | 6 | mV | VCC+ = 3.3 V; TSV62x Tmin < Top < Tmax | 7 | ||
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 3.3 V; Vout = VCC/2 | 7 | |
| Common mode rejection ratio | CMR | 57 | 79 | dB | VCC+ = 3.3 V; 0 V to 3.3 V, Vout = 1.65 V | 7 | |
| Large signal voltage gain | Avd | 81 | 98 | dB | VCC+ = 3.3 V; RL=10 kΩ, Vout = 0.5 V to 2.8 V | 7 | |
| High level output voltage (VOH = VCC - Vout) | VOH | 5 | 35 | mV | VCC+ = 3.3 V; RL = 10 kΩ | 7 | |
| High level output voltage (VOH = VCC - Vout) | VOH | 50 | mV | VCC+ = 3.3 V; RL = 10 kΩ; Tmin < Top < Tmax | 7 | ||
| Low level output voltage | VOL | 4 | 35 | mV | VCC+ = 3.3 V; RL = 10 kΩ | 7 | |
| Low level output voltage | VOL | 50 | mV | VCC+ = 3.3 V; RL = 10 kΩ; Tmin < Top < Tmax | 7 | ||
| Output sink current | Isink | 23 | 45 | mA | VCC+ = 3.3 V; Vo = 5 V | 7 | |
| Output sink current | Isink | 20 | mA | VCC+ = 3.3 V; Vo = 5 V; Tmin < Top < Tmax | 7 | ||
| Output source current | Isource | 23 | 38 | mA | VCC+ = 3.3 V; Vo = 0 V | 7 | |
| Output source current | Isource | 20 | mA | VCC+ = 3.3 V; Vo = 0 V; Tmin < Top < Tmax | 7 | ||
| Supply current (per operator) | ICC | 26 | 33 | µA | VCC+ = 3.3 V; No load, Vout = 2.5 V | 7 | |
| Supply current (per operator) | ICC | 35 | µA | VCC+ = 3.3 V; No load, Vout = 2.5 V; Tmin < Top < Tmax | 7 | ||
| Gain bandwidth product | GBP | 310 | 380 | kHz | VCC+ = 3.3 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz | 7 | |
| Slew rate | SR | 0.11 | 0.175 | V/µs | VCC+ = 3.3 V; RL = 10 kΩ, CL = 100 pF, AV = 1 | 7 | |
| Offset voltage | Vio | 4 | mV | VCC+ = 5 V | 8 | ||
| Offset voltage | Vio | 6 | mV | VCC+ = 5 V; TSV62x Tmin < Top < Tmax | 8 | ||
| Input offset current | Iio | 1 | 10 | pA | VCC+ = 5 V; Vout = VCC/2 | 8 | |
| Common mode rejection ratio | CMR | 60 | 80 | dB | VCC+ = 5 V; 0 V to 5 V, Vout = 2.5 V | 8 | |
| Large signal voltage gain | Avd | 85 | 98 | dB | VCC+ = 5 V; RL=10 kΩ, Vout = 0.5 V to 4.5 V | 8 | |
| Supply voltage rejection ratio | SVR | 75 | 102 | dB | VCC+ = 5 V; VCC = 1.8 to 5 V | 8 | |
| High level output voltage (VOH = VCC - Vout) | VOH | 7 | 35 | mV | VCC+ = 5 V; RL = 10 kΩ | 8 | |
| High level output voltage (VOH = VCC - Vout) | VOH | 50 | mV | VCC+ = 5 V; RL = 10 kΩ; Tmin < Top < Tmax | 8 | ||
| Low level output voltage | VOL | 6 | 35 | mV | VCC+ = 5 V; RL = 10 kΩ | 8 | |
| Low level output voltage | VOL | 50 | mV | VCC+ = 5 V; RL = 10 kΩ; Tmin < Top < Tmax | 8 | ||
| Output sink current | Isink | 40 | 69 | mA | VCC+ = 5 V; Vo = 5 V | 8 | |
| Output sink current | Isink | 35 | mA | VCC+ = 5 V; Vo = 5 V; Tmin < Top < Tmax | 8 | ||
| Output source current | Isource | 40 | 74 | mA | VCC+ = 5 V; Vo = 0 V | 8 | |
| Output source current | Isource | 35 | mA | VCC+ = 5 V; Vo = 0 V; Tmin < Top < Tmax | 8 | ||
| Supply current (per operator) | ICC | 29 | 36 | µA | VCC+ = 5 V; No load, Vout = 2.5 V | 8 | |
| Supply current (per operator) | ICC | 38 | µA | VCC+ = 5 V; No load, Vout = 2.5 V; Tmin < Top < Tmax | 8 | ||
| Gain bandwidth product | GBP | 350 | 420 | kHz | VCC+ = 5 V; RL = 10 kΩ, CL = 100 pF, f = 100 kHz | 8 | |
| Slew rate | SR | 0.12 | 0.19 | V/µs | VCC+ = 5 V; RL = 10 kΩ, CL = 100 pF, AV = 1 | 9 | |
| Thermal resistance junction to ambient (SO8) | Rthja | 125 | °C/W | SO8 package; typical value | 4 |
CAD (KiCad official)
- Symbol:
TSV622IDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
tsv622idt-etched.step/tsv622idt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsv622idt.step/tsv622idt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (24 pp, sha256
febefcb47301fdb9, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).