3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS1G14XC5-Q1
Jiangsu RUNIC Tech · Flip Flops · SOT-353
RS1G14XC5-Q1 from Jiangsu RUNIC Tech, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N.C. | unconnected | Not connected with no internal connection; GND is typically the recommended connection to a heat spreading plane. |
| 2 | A | input | Schmitt-trigger inverter input that accepts voltages up to 5.5V, with hysteresis (ΔVT) to tolerate slow or noisy signals. |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | Y | output | Inverted output with high drive of ±24mA at VCC=3.0V, and Ioff circuitry that disables the output during partial-power-down. |
| 5 | VCC | power_in | Supply pin with an operating voltage range of 1.65V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-353 |
| Category | Logic |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Propagation delay (VCC=1.8V±0.15V) | tpd | 6.4 | 24.3 | ns | VCC=1.8V±0.15V, CL=30pF, RL=500Ω, Full | 9 | |
| Propagation delay (VCC=2.5V±0.2V) | tpd | 3.1 | 16.9 | ns | VCC=2.5V±0.2V, CL=30pF, RL=500Ω, Full | 9 | |
| Propagation delay (VCC=3.3V±0.3V) | tpd | 2.7 | 15.9 | ns | VCC=3.3V±0.3V, CL=50pF, RL=500Ω, Full | 9 | |
| Propagation delay (VCC=5V±0.5V) | tpd | 2.2 | 14.2 | ns | VCC=5V±0.5V, CL=50pF, RL=500Ω, Full | 9 | |
| Supply voltage | VCC | -0.5 | 6.5 | V | 6 | ||
| Input voltage range | VI | -0.5 | 6.5 | V | 6 | ||
| Voltage applied to any output in high-impedance or power-off state | Vo | -0.5 | 6.5 | V | high-impedance or power-off state | 6 | |
| Voltage applied to any output in high or low state | Vo | -0.5 | V | high or low state; upper limit printed as VCC+0.5 V | 6 | ||
| Input clamp current | IIK | -50 | mA | VI<0 | 6 | ||
| Output clamp current | IOK | -50 | mA | VO<0 | 6 | ||
| Continuous output current | IO | -50 | 50 | mA | 6 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 6 | |||
| Junction temperature | TJ | -65 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Electrostatic discharge, Human-Body Model | V(ESD) | -2000 | 2000 | V | HBM per AEC Q100-002 | 6 | |
| Electrostatic discharge, Charged-Device Model | V(ESD) | -500 | 500 | V | CDM per AEC Q100-011 | 6 | |
| Supply voltage (operating) | VCC | 1.65 | 5.5 | V | Operating | 7 | |
| Supply voltage (data retention) | VCC | 1.5 | V | Data retention only | 7 | ||
| Input voltage | VI | 0 | 5.5 | V | 7 | ||
| Output voltage | VO | 0 | V | upper limit printed as VCC | 7 | ||
| Operating temperature | TA | -40 | 125 | °C | 7 | ||
| Positive going input threshold voltage | VT+ | 0.75 | 1.05 | V | VCC=1.65V, Full | 8 | |
| Positive going input threshold voltage | VT+ | 1.25 | 1.55 | V | VCC=2.3V | 8 | |
| Positive going input threshold voltage | VT+ | 1.5 | 2.1 | V | VCC=3V | 8 | |
| Positive going input threshold voltage | VT+ | 2.3 | 3 | V | VCC=4.5V | 8 | |
| Positive going input threshold voltage | VT+ | 2.8 | 3.4 | V | VCC=5.5V | 8 | |
| Negative going input threshold voltage | VT- | 0.3 | 0.6 | V | VCC=1.65V, Full | 8 | |
| Negative going input threshold voltage | VT- | 0.35 | 0.65 | V | VCC=2.3V | 8 | |
| Negative going input threshold voltage | VT- | 0.45 | 0.75 | V | VCC=3V | 8 | |
| Negative going input threshold voltage | VT- | 0.7 | 1 | V | VCC=4.5V | 8 | |
| Negative going input threshold voltage | VT- | 0.85 | 1.15 | V | VCC=5.5V | 8 | |
| Hysteresis (VT+ - VT-) | ΔVT | 0.35 | 0.6 | V | VCC=1.65V, Full | 8 | |
| Hysteresis (VT+ - VT-) | ΔVT | 0.6 | 1.2 | V | VCC=2.3V | 8 | |
| Hysteresis (VT+ - VT-) | ΔVT | 1.05 | 1.65 | V | VCC=3V | 8 | |
| Hysteresis (VT+ - VT-) | ΔVT | 1.6 | 2 | V | VCC=4.5V | 8 | |
| Hysteresis (VT+ - VT-) | ΔVT | 1.95 | 2.25 | V | VCC=5.5V | 8 | |
| High-level output voltage | VOH | 1.2 | V | IOH=-4mA, VCC=1.65V | 8 | ||
| High-level output voltage | VOH | 1.9 | V | IOH=-8mA, VCC=2.3V | 8 | ||
| High-level output voltage | VOH | 2.4 | V | IOH=-16mA, VCC=3V | 8 | ||
| High-level output voltage | VOH | 2.3 | V | IOH=-24mA (VCC not printed on row) | 8 | ||
| High-level output voltage | VOH | 3.8 | V | IOH=-32mA, VCC=4.5V | 8 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL=100µA, VCC=1.65V to 5.5V, Full | 8 | ||
| Low-level output voltage | VOL | 0.45 | V | IOL=4mA, VCC=1.65V | 8 | ||
| Low-level output voltage | VOL | 0.3 | V | IOL=8mA, VCC=2.3V | 8 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL=16mA, VCC=3V | 8 | ||
| Low-level output voltage | VOL | 0.55 | V | IOL=24mA (VCC not printed on row) | 8 | ||
| A input current | II | -1 | 1 | µA | VI=5.5V or GND, +25C | 8 | |
| A input current | II | -5 | 5 | µA | VI=5.5V or GND, Full | 8 | |
| Off-state leakage current | Ioff | -1 | 1 | µA | VI or VO=5.5V, VCC=0, +25C | 8 | |
| Off-state leakage current | Ioff | -10 | 10 | µA | VI or VO=5.5V, VCC=0, Full | 8 | |
| Quiescent supply current | ICC | 0.1 | 1 | µA | VI=5.5V or GND, IO=0, 1.65V to 5.5V, +25C | 8 | |
| Quiescent supply current | ICC | 10 | µA | VI=5.5V or GND, IO=0, 1.65V to 5.5V, Full | 8 | ||
| Additional quiescent supply current per input | ΔICC | 500 | µA | One input at VCC-0.6V, other inputs at VCC or GND, 3V to 5.5V, Full | 8 | ||
| Thermal impedance, junction to ambient | θJA | 376 | °C/W | SOT353/(SC70-5) | 6 | ||
| Input capacitance | Ci | 4 | pF | VI=VCC or GND, VCC=3.3V, +25C | 8 | ||
| Power dissipation capacitance | Cpd | 10 | pF | VCC=1.8V, f=10MHz, +25C | 9 | ||
| Power dissipation capacitance | Cpd | 14 | pF | VCC=2.5V, f=10MHz, +25C | 9 | ||
| Power dissipation capacitance | Cpd | 16 | pF | VCC=3.3V, f=10MHz, +25C | 9 | ||
| Power dissipation capacitance | Cpd | 18 | pF | VCC=5V, f=10MHz, +25C | 9 |
CAD (KiCad official)
- Symbol:
RS1G14XC5-Q1 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
rs1g14xc5-q1-etched.step/rs1g14xc5-q1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs1g14xc5-q1.step/rs1g14xc5-q1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (13 pp, sha256
378b13789b478dad, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).