LTC6268IS6#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Amplifier output with rail-to-rail swing.
2	V-	power_in	Negative power supply, normally tied to ground; V+ to V- must be 3.1V to 5.25V, and if not grounded bypass it to ground with 0.1µF close to the pin.
3	+IN	input	Non-inverting input of the amplifier, with a voltage range from V- to V+ - 0.5V.
4	-IN	input	Inverting input of the amplifier, with a voltage range from V- to V+ - 0.5V.
5	SHDN	input	Active-low shutdown with threshold 0.75V above V-; the amplifier is enabled if the pin is left unconnected.
6	V+	power_in	Positive power supply, total V+ to V- of 3.1V to 5.25V, with a 0.1µF bypass capacitor to ground as close to the pin as possible.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	TSOT-23-6
Category	Operational Amplifier/Comparator
Pins	6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Supply Voltage V+ to V-				5.5	V		2
Input Current (+IN, -IN)		-1		1	mA	Note 2	2
Input Current (SHDN)		-1		1	mA		2
Operating Temperature Range (LTC6268I)		-40		85	°C	LTC6268I	2
Specified Temperature Range (LTC6268I)		-40		85	°C	LTC6268I, Note 4	2
Maximum Junction Temperature	TJMAX			150	°C		2
Storage Temperature Range		-65		150	°C		2
Thermal Resistance, Junction to Ambient	θJA		192		°C/W	S6 package 6-lead TSOT-23, Note 5	2
Supply Voltage Range		3.1		5.25	V	over full temperature range	4
Input Offset Voltage	VOS	-0.7	0.2	0.7	mV	VCM = 2.75V, VSUPPLY = 5.0V, TA = 25°C	3
Input Offset Voltage (full temp)	VOS	-2.5		2.5	mV	VCM = 2.75V, VSUPPLY = 5.0V, over temperature	3
Input Offset Voltage	VOS	-1	0.2	1	mV	VCM = 4.0V, VSUPPLY = 5.0V, TA = 25°C	3
Input Offset Voltage (full temp)	VOS	-4.5		4.5	mV	VCM = 4.0V, VSUPPLY = 5.0V, over temperature	3
Input Offset Voltage Drift	TC VOS		4		μV/°C	VCM = 2.75V, VSUPPLY = 5.0V	3
Input Bias Current	IB	-20	3	20	fA	VCM = 2.75V, LTC6268I, 5.0V, TA = 25°C (typ printed ±3)	3
Input Bias Current (full temp)	IB	-900		900	fA	VCM = 2.75V, LTC6268I, 5.0V, over temperature	3
Input Offset Current	IOS	-40	6	40	fA	VCM = 2.75V, LTC6268I, 5.0V, TA = 25°C (typ printed ±6)	3
Input Offset Current (full temp)	IOS	-450		450	fA	VCM = 2.75V, LTC6268I, 5.0V, over temperature	3
Common Mode Rejection Ratio	CMRR	72	90		dB	VCM = 0.5V to 3.2V (PNP Side), 5.0V, TA = 25°C	3
Common Mode Rejection Ratio (full temp)	CMRR	70			dB	VCM = 0.5V to 3.2V (PNP Side), 5.0V, over temperature	3
Common Mode Rejection Ratio	CMRR	64	82		dB	VCM = 0V to 4.5V, 5.0V, TA = 25°C	3
Common Mode Rejection Ratio (full temp)	CMRR	52			dB	VCM = 0V to 4.5V, 5.0V, over temperature	3
Input Voltage Range	IVR	0		4.5	V	Guaranteed by CMRR, 5.0V, over temperature	3
Power Supply Rejection Ratio	PSRR	78	95		dB	VCM = 1.0V, VSUPPLY from 3.1V to 5.25V, TA = 25°C	4
Power Supply Rejection Ratio (full temp)	PSRR	75			dB	VCM = 1.0V, VSUPPLY from 3.1V to 5.25V, over temperature	4
Open Loop Voltage Gain	AV	125	250		V/mV	VOUT = 0.5V to 4.5V, RLOAD = 10k, 5.0V, TA = 25°C	4
Open Loop Voltage Gain (full temp)	AV	40			V/mV	VOUT = 0.5V to 4.5V, RLOAD = 10k, 5.0V, over temperature	4
Open Loop Voltage Gain	AV	10	21		V/mV	VOUT = 0.5V to 4.5V, RLOAD = 100, 5.0V, TA = 25°C	4
Open Loop Voltage Gain (full temp)	AV	2			V/mV	VOUT = 0.5V to 4.5V, RLOAD = 100, 5.0V, over temperature	4
Output Swing Low	VOL		80	140	mV	ISINK = 10mA, Input Overdrive 30mV, from V-, 5.0V, TA = 25°C	4
Output Swing Low (full temp)	VOL			200	mV	ISINK = 10mA, 5.0V, over temperature	4
Output Swing Low	VOL		130	200	mV	ISINK = 25mA, Input Overdrive 30mV, from V-, 5.0V, TA = 25°C	4
Output Swing Low (full temp)	VOL			260	mV	ISINK = 25mA, 5.0V, over temperature	4
Output Swing High	VOH		70	140	mV	ISOURCE = 10mA, Input Overdrive 30mV, from V+, 5.0V, TA = 25°C	4
Output Swing High (full temp)	VOH			200	mV	ISOURCE = 10mA, 5.0V, over temperature	4
Output Swing High	VOH		160	270	mV	ISOURCE = 25mA, Input Overdrive 30mV, from V+, 5.0V, TA = 25°C	4
Output Swing High (full temp)	VOH			370	mV	ISOURCE = 25mA, 5.0V, over temperature	4
Output Short Circuit Current	ISC	60	90		mA	5.0V, Note 9, TA = 25°C	4
Output Short Circuit Current (full temp)	ISC	40			mA	5.0V, Note 9, over temperature	4
Supply Current Per Amplifier	IS	15	16.5	18	mA	5.0V, TA = 25°C	4
Supply Current Per Amplifier (full temp)	IS	9		23	mA	5.0V, over temperature	4
Supply Current in Shutdown (Per Amplifier)	IS		0.39	0.85	mA	5.0V, TA = 25°C	4
Supply Current in Shutdown (full temp)	IS			1.2	mA	5.0V, over temperature	4
Shutdown Pin Current	ISHDN	-12	2	12	µA	VSHDN = 0.75V, over temperature	4
SHDN Input Low Voltage	VIL			0.75	V	Disable, over temperature	4
SHDN Input High Voltage	VIH	1.5			V	Enable. If SHDN is Unconnected, Amp is Enabled, over temperature	4
Gain-Bandwidth Product	GBW	400	500		MHz	f = 10MHz, 5.0V	4
Slew Rate+	SR+	300	400		V/µs	AV = 6, VOUT = 0.5V to 4.5V, 20% to 80%, CLOAD = 10pF, 5.0V, TA = 25°C	4
Slew Rate-	SR-	180	260		V/µs	AV = 6, VOUT = 4.5V to 0.5V, 80% to 20%, CLOAD = 10pF, 5.0V, TA = 25°C	4
Input Offset Voltage	VOS	-0.7	0.2	0.7	mV	VCM = 1.0V, VSUPPLY = 3.3V, TA = 25°C	5
Input Offset Voltage (full temp)	VOS	-2.5		2.5	mV	VCM = 1.0V, VSUPPLY = 3.3V, over temperature	5
Input Bias Current	IB	-20	3	20	fA	VCM = 1.0V, LTC6268I, 3.3V, TA = 25°C (typ printed ±3)	5
Common Mode Rejection Ratio	CMRR	60	77		dB	VCM = 0V to 2.8V (Full Range), 3.3V, TA = 25°C	5
Open Loop Voltage Gain	AV	80	200		V/mV	VOUT = 0.5V to 2.8V, RLOAD = 10k, 3.3V, TA = 25°C	5
Output Short Circuit Current	ISC	50	80		mA	3.3V, Note 9, TA = 25°C	5
Supply Current per Amplifier	IS	14.5	16	17.5	mA	3.3V, TA = 25°C	5
Supply Current per Amplifier (full temp)	IS	9		23	mA	3.3V, over temperature	5
Supply Current in Shutdown (Per Amplifier)	IS		0.23	0.6	mA	3.3V, TA = 25°C	6
Gain-Bandwidth Product	GBW	370	420		MHz	f = 10MHz, 3.3V	6

CAD (KiCad official)

Symbol: LTC6268IS6#TRMPBF
Footprint: Package_TO_SOT_SMD:TSOT-23-6
3D model: TSOT-23-6 (KiCad packages3D, STEP)
3D model files: ltc6268is6-trmpbf-etched.step / ltc6268is6-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6268is6-trmpbf.step / ltc6268is6-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (24 pp, sha256 84b889464026e992, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LTC6268IS6#TRMPBF

Verified LTC6268IS6#TRMPBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README