Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

L293B

STMicroelectronics · Motor Driver ICs · DIP-16

L293B from STMicroelectronics, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CHIP ENABLE 1 input Inhibit input for channels 1 and 2; high (2.3 V to 7 V) enables the driver pair and low (max 1.5 V) turns off all its transistors.
2 INPUT 1 input TTL-compatible logic input for channel 1 with low max 1.5 V and high min 2.3 V.
3 OUTPUT 1 output Push-pull driver output of channel 1 delivering up to 1 A (2 A peak non-repetitive).
4 GND power_in Ground pin that also conducts heat to the PCB; connect to a copper area or heatsink at electrical ground.
5 GND power_in Ground pin that also conducts heat to the PCB; connect to a copper area or heatsink at electrical ground.
6 OUTPUT 2 output Push-pull driver output of channel 2 delivering up to 1 A (2 A peak non-repetitive).
7 INPUT 2 input TTL-compatible logic input for channel 2 with low max 1.5 V and high min 2.3 V.
8 Vs power_in Output stage supply voltage, from Vss up to 36 V maximum.
9 CHIP ENABLE 2 input Inhibit input for channels 3 and 4; high (2.3 V to 7 V) enables the driver pair and low (max 1.5 V) turns off all its transistors.
10 INPUT 3 input TTL-compatible logic input for channel 3 with low max 1.5 V and high min 2.3 V.
11 OUTPUT 3 output Push-pull driver output of channel 3 delivering up to 1 A (2 A peak non-repetitive).
12 GND power_in Ground pin that also conducts heat to the PCB; connect to a copper area or heatsink at electrical ground.
13 GND power_in Ground pin that also conducts heat to the PCB; connect to a copper area or heatsink at electrical ground.
14 OUTPUT 4 output Push-pull driver output of channel 4 delivering up to 1 A (2 A peak non-repetitive).
15 INPUT 4 input TTL-compatible logic input for channel 4 with low max 1.5 V and high min 2.3 V.
16 Vss power_in Separate logic supply voltage, 4.5 V to 36 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DIP-16
Category Power Management ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Vs 36 V 3
Logic Supply Voltage Vss 36 V 3
Input Voltage Vi 7 V 3
Inhibit Voltage Vinh 7 V 3
Peak Output Current Iout 2 A non repetitive t = 5ms 3
Total Power Dissipation Ptot 5 W at Tground-pins = 80°C 3
Storage and Junction Temperature Tstg, Tj -40 150 °C 3
Thermal Resistance Junction-case Rth j-case 14 °C/W 4
Thermal Resistance Junction-ambient Rth j-amb 80 °C/W 4
Supply Voltage Vs 36 V min is Vss 4
Logic Supply Voltage Vss 4.5 36 V 4
Total Quiescent Supply Current Is 2 6 mA Vi = L; Io = 0; Vinh = H 4
Total Quiescent Supply Current Is 16 24 mA Vi = h; Io = 0; Vinh = H 4
Total Quiescent Supply Current Is 4 mA Vinh = L 4
Total Quiescent Logic Supply Current Iss 44 60 mA Vi = L; Io = 0; Vinh = H 4
Total Quiescent Logic Supply Current Iss 16 22 mA Vi = h; Io = 0; Vinh = H 4
Total Quiescent Logic Supply Current Iss 16 24 mA Vinh = L 4
Input Low Voltage ViL -0.3 1.5 V 4
Input High Voltage ViH 2.3 V VSS ≤ 7V; max is Vss 4
Input High Voltage ViH 2.3 7 V VSS > 7V 4
Low Voltage Input Current IiL -10 µA Vil = 1.5V 4
High Voltage Input Current IiH 30 100 µA 2.3V ≤ VIH ≤ VSS - 0.6V 4
Inhibit Low Voltage VinhL -0.3 1.5 V 4
Inhibit High Voltage VinhH 2.3 V VSS ≤7V; max is Vss 4
Inhibit High Voltage VinhH 2.3 7 V VSS > 7V 4
Low Voltage Inhibit Current IinhL -30 -100 µA VinhL = 1.5V 4
High Voltage Inhibit Current IinhH -10 10 µA 2.3V ≤VinhH≤ Vss- 0.6V 4
Source Output Saturation Voltage VCEsatH 1.4 1.8 V Io = -1A 4
Sink Output Saturation Voltage VCEsatL 1.2 1.8 V Io = 1A 4
Rise Time tr 250 ns 0.1 to 0.9 Vo 4
Fall Time tf 250 ns 0.9 to 0.1 Vo 4
Turn-on Delay ton 750 ns 0.5 Vi to 0.5 Vo 4
Turn-off Delay toff 200 ns 0.5 Vi to 0.5 Vo 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper The Rth j-amb of the L293B and the L293E can be reduced by soldering the GND pins to a suitable copper 9

CAD (KiCad official)

  • Symbol: L293B
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: l293b-etched.step / l293b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l293b.step / l293b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (12 pp, sha256 e01fb4030857fd6d, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF