Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP4011-503E

Microchip Tech · Digital Potentiometers · SOIC-8

MCP4011-503E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive power supply input, operating from 1.8V to 5.5V relative to VSS, with a decoupling capacitor on VDD to VSS recommended for maximum performance.
2 VSS power_in Ground reference for the device.
3 A passive Potentiometer terminal A, which must be held between VSS and VDD and can carry both positive and negative current.
4 W passive Potentiometer wiper terminal, which must be held between VSS and VDD and can carry both positive and negative current.
5 CS input Chip select input: forcing VIL enables serial commands, forcing VIHH enables high-voltage serial commands, and it has an internal pull-up that holds it at VIH when floating.
6 B passive Potentiometer terminal B, which must be held between VSS and VDD and can carry both positive and negative current.
7 NC unconnected No connection.
8 U/D input TTL-compatible increment/decrement input that moves the wiper one step toward terminal A on increment and one step toward terminal B on decrement.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VDD 2.7 5.5 V 2
Resistance (end-to-end, -503 device) RAB 40 50 60 k -503 devices (Note 1) 2
Resistance tolerance (-503 device) -20 20 % Printed as (±20%) for RAB 2
Wiper Resistance RW 75 125 ohm 5.5V (Note 3, Note 4) 3
Wiper Resistance RW 75 325 ohm 2.7V (Note 3, Note 4) 3
Full-Scale Error (MCP4011/13 only) VWFSE -0.5 -0.1 0.5 LSb Code 3Fh, 2.7V to 5.5V VDD 3
Zero-Scale Error (MCP4011/13 only) VWZSE -0.5 0.1 0.5 LSb Code 00h, 2.7V to 5.5V VDD 3
Current through A, W or B IW 2.5 mA Note 6 3
Nominal Resistance Tempco (-20 to +70 C) R/T 50 ppm/°C TA = -20°C to +70°C 3
Nominal Resistance Tempco (-40 to +85 C) R/T 100 ppm/°C TA = -40°C to +85°C 3
Nominal Resistance Tempco (-40 to +125 C) R/T 150 ppm/°C TA = -40°C to +125°C 3
Ratiometric Tempco (MCP4011 and MCP4013 only) VWA/T 10 ppm/°C MCP4011 and MCP4013 only, code = 1Fh 3
Potentiometer Integral Nonlinearity (MCP4011/13 only) INL -0.5 0.25 0.5 LSb MCP4011/13 only (Note 2) 4
Potentiometer Differential Nonlinearity (MCP4011/13 only) DNL -0.5 0.25 0.5 LSb MCP4011/13 only (Note 2) 4
Rheostat Integral Nonlinearity (50k device, 5.5V) R-INL -0.5 0.25 0.5 LSb -503 devices (50k), 5.5V (Note 4, Note 7) 4
Rheostat Integral Nonlinearity (50k device, 2.7V) R-INL -1 0.25 1 LSb -503 devices (50k), 2.7V (Note 7) 4
Rheostat Differential Nonlinearity (50k device, 5.5V) R-DNL -0.5 0.25 0.5 LSb -503 devices (50k), 5.5V (Note 4, Note 7) 4
Rheostat Differential Nonlinearity (50k device, 2.7V) R-DNL -0.5 0 0.5 LSb -503 devices (50k), 2.7V (Note 7) 4
High-Voltage Input Entry Voltage (Threshold for WiperLock) VIHH 9 12.5 V -40°C to +125°C 5
High-Voltage Input Entry Voltage (Threshold for WiperLock) VIHH 8.5 12.5 V +7°C to +125°C 5
Input Leakage Current IIL -1 1 µA VIN = VDD 5
Supply Current IDD 0.3 1 µA Serial Interface Inactive (CS = VIH, U/D = VIH) 2
Supply Current IDD 45 µA 5.5V, CS = VSS, fU/D = 1 MHz 2
Supply Current IDD 15 µA 2.7V, CS = VSS, fU/D = 1 MHz 2
Power Supply Sensitivity (MCP4011 and MCP4013 only) PSS 0.0015 0.0035 %/% VDD = 4.5V to 5.5V, VA = 4.5V, Code = 1Fh 5
CS Low Time tCSLO 5 µs 6
CS High Time tCSHI 500 ns 2.7V <= VDD <= 5.5V 6
U/D to CS Hold Time tLUC 500 ns 2.7V <= VDD <= 5.5V 6
U/D to CS Hold Time tLUC 750 ns 1.8V <= VDD < 2.7V 6
CS to U/D Low Setup Time tLCUF 500 ns 6
CS to U/D High Setup Time tLCUR 3 µs 6
U/D High Time tHI 500 ns 6
U/D Low Time tLO 500 ns 6
Up/Down Toggle Frequency fUD 1 MHz 6
Wiper Settling Time (50k) tS 5 µs 50 k CL = 100 pF 6
Wiper Response on Power-Up tPU 200 ns 6
CS Pull-Up/Pull-Down Resistance RCS 16 k VDD = 5.5V, VCS = 3V 5
CS Weak Pull-Up/Pull-Down Current IPU 170 µA VDD = 5.5V, VCS = 3V 5
CS and U/D Pin Capacitance CIN, COUT 10 pF fC = 1 MHz 5
Leakage current into A, W or B (MCP4011) IWL 100 nA MCP4011 A = W = B = VSS 3
Capacitance (PA) CAW 75 pF f = 1 MHz, code = 1Fh 3
Capacitance (Pw) CW 120 pF f = 1 MHz, code = 1Fh 3
Capacitance (PB) CBW 75 pF f = 1 MHz, code = 1Fh 3
Bandwidth -3 dB (50k device) BW 200 kHz -503 devices, code = 1F, output load = 30 pF 3
Step Resistance (50k, typical) RS 793.65 ohm MCP401X-503E typical step resistance (Table 6-1) 38
Specified Temperature Range TA -40 125 °C 10
Operating Temperature Range TA -40 125 °C 10
Storage Temperature Range TA -65 150 °C 10
Thermal Resistance, 8L-SOIC θJA 163 °C/W 10
VDD supply voltage (absolute maximum) VDD 6.5 V 2
CS and U/D inputs w.r.t VSS VCS, VU/D -0.3 12.5 V 2
A, B and W terminals w.r.t VSS VA, VB, VW -0.3 V Upper limit VDD + 0.3V 2
Current at Input Pins -10 10 mA 2
Current at Supply Pins -10 10 mA 2
Current at Potentiometer Pins -2.5 2.5 mA 2
Storage temperature -65 150 °C 2
Ambient temperature with power applied -55 125 °C 2
Maximum Junction Temperature (TJ) TJ 150 °C 2
ESD protection on all pins (HBM) 4 kV HBM 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 61

CAD (KiCad official)

  • Symbol: MCP4011-503E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp4011-503e-etched.step / mcp4011-503e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp4011-503e.step / mcp4011-503e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (70 pp, sha256 35f77d044fe80869, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF