component
MAX4375TEUB+T
Public Made by Adomby adom
Maxim Integrated Special Purpose Amplifiers, MSOP-10. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMAX4375TEUB+T
Maxim Integrated · Special Purpose Amplifiers · MSOP-10
MAX4375TEUB+T from Maxim Integrated, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply Voltage Input, operating range +2.7V to +28V. |
| 2 | OUT | output | Voltage Output proportional to sense voltage VSENSE (VRS+ - VRS-) with gain of +20V/V for the MAX4375T variant. |
| 3 | CIN1 | input | Comparator Input 1, positive input of internal latching comparator with negative terminal connected to 0.6V bandgap reference. |
| 4 | CIN2 | input | Comparator Input 2, negative terminal for MAX4375 of the second internal comparator with positive terminal connected to 0.6V reference. |
| 5 | GND | power_in | Ground, return path for supply voltage and signal reference. |
| 6 | RESET | input | Reset Input, resets the latching output when pulsed low for minimum 1.5µs, or disables latch when held low below 0.8V. |
| 7 | COUT2 | tri_state | Open-Drain Comparator Output for second unlatched internal comparator, requires external pull-up resistor to +5V. |
| 8 | COUT1 | tri_state | Open-Drain Latching Comparator Output controlled by CIN1 input, requires external pull-up resistor to +5V. |
| 9 | RS- | input | Load-Side Connection for External Sense Resistor, connected to load side of RSENSE. |
| 10 | RS+ | input | Supply-Side Connection for External Sense Resistor supporting high-side current monitoring with 0V to +28V common-mode input range independent of supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | MSOP-10 |
| Category | Amplifiers |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
MAX4375TEUB+T - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
max4375teub-t-etched.step/max4375teub-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max4375teub-t.step/max4375teub-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (13 pp, sha256
1d321716ae830171, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).