component
MAX962EUA+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX962EUA+T
Analog Devices Inc Maxim Integrated · Comparators · MSOP-8
MAX962EUA+T from Analog Devices Inc Maxim Integrated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INA+ | input | Comparator A noninverting input; the input common-mode range extends 100mV beyond the rails, from -0.1V to VCC + 0.1V. |
| 2 | INA- | input | Comparator A inverting input; the input common-mode range extends 100mV beyond the rails, from -0.1V to VCC + 0.1V. |
| 3 | INB+ | input | Comparator B noninverting input; the input common-mode range extends 100mV beyond the rails, from -0.1V to VCC + 0.1V. |
| 4 | INB- | input | Comparator B inverting input; the input common-mode range extends 100mV beyond the rails, from -0.1V to VCC + 0.1V. |
| 5 | GND | power_in | Ground reference for the device; the datasheet recommends a good, unbroken, low-inductance ground plane. |
| 6 | QB | output | Comparator B TTL/CMOS-compatible output that sources or sinks 4mA to within 0.52V of GND and VCC. |
| 7 | QA | output | Comparator A TTL/CMOS-compatible output that sources or sinks 4mA to within 0.52V of GND and VCC. |
| 8 | VCC | power_in | Positive supply input, 2.7V to 5.5V; VCC to GND must be 5.5V or less. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.7 | 5.5 | V | Inferred by PSRR | 2 | |
| Input Common-Mode Voltage Range (minimum) | VCMR | -0.1 | V | (Note 2) | 2 | ||
| Input-Referred Trip Points (µMAX) | VTRIP | -6.5 | 3.5 | 6.5 | mV | VCM = -0.1V or 5.1V, VCC = 5V (Note 3) | 2 |
| Input Offset Voltage (µMAX) | VOS | -4.5 | 1.5 | 4.5 | mV | VCM = -0.1V or 5.1V, VCC = 5V (Note 4) | 2 |
| Input Bias Current (µMAX) | IB | -30 | 15 | 30 | µA | VIN+ = VIN- = 0V or VCC, VCC = 5V | 2 |
| Common-Mode Rejection Ratio (µMAX) | CMRR | 0.1 | 0.3 | 1 | mV/V | VCC = 5V, VCM = -0.1V to 5.1V (Note 5) | 3 |
| Power-Supply Rejection Ratio | PSRR | 0.05 | 0.3 | 0.3 | mV/V | VCM = 0V (Note 6) | 3 |
| Output Low Voltage (E grade) | VOL | 0.52 | V | ISINK = 4mA | 3 | ||
| Capacitive Slew Current | 30 | 60 | mA | VOUT = 1.4V, VCC = 2.7V | 3 | ||
| Supply Current per Comparator (MAX962/MAX964) | ICC | 5 | 8 | 9 | mA | MAX962/MAX964, VCC = 5V | 3 |
| Propagation Delay (E grade) | tPD | 4.5 | 7 | 8.5 | ns | 5mV overdrive (Note 7) | 3 |
| Input Capacitance | 3 | pF | 2 | ||||
| Differential Input Impedance | RIND | 8 | kΩ | VCC = 5V | 2 | ||
| Common-Mode Input Impedance | RINCM | 130 | kΩ | VCC = 5V | 2 | ||
| Input-Referred Hysteresis | 3.5 | mV | 2 | ||||
| Differential Input Clamp Voltage | 2.1 | V | VCC = 5.5V, VIN- = 0V, IIN+ = 100µA | 2 | |||
| Output Capacitance | 4 | pF | 3 | ||||
| Rise/Fall Time | tR, tF | 2.3 | ns | VCC = 5V | 3 | ||
| Differential Propagation Delay | tPD | 0.3 | ns | Between any two channels or outputs (Q/Q) | 3 | ||
| Propagation-Delay Skew | tSKEW | 0.3 | ns | Between tPD- and tPD+ | 3 | ||
| Supply Voltage (absolute maximum, VCC to GND) | VCC | -0.3 | 6 | V | VCC to GND | 2 | |
| Current into Input Pins | -20 | 20 | mA | Current into input pins | 2 | ||
| Operating Temperature Range (E grade) | TA | -40 | 85 | °C | MAX96_E | 2 | |
| Storage Temperature Range | TSTG | -65 | 160 | °C | 2 | ||
| Lead Temperature (soldering) | 300 | °C | soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX962EUA+T - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
max962eua-t-etched.step/max962eua-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max962eua-t.step/max962eua-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (13 pp, sha256
e9d278b123fcca4b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).