3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT26LS32ARZ
HTCSEMI · Multi-protocol Transceivers · SOP-16
HT26LS32ARZ from HTCSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT A- | input | Receiver A differential inverting input pin. |
| 2 | INPUT A+ | input | Receiver A differential non-inverting input pin. |
| 3 | OUTPUT A | output | Receiver A output pin. |
| 4 | ENABLE | input | Gate control (active high). This pin is one of the two control pins which enables or disables all four receivers. |
| 5 | OUTPUT B | output | Receiver B output pin. |
| 6 | INPUT B+ | input | Receiver B differential non-inverting input pin. |
| 7 | INPUT B- | input | Receiver B differential inverting input pin. |
| 8 | GND | power_in | Signal and power ground. |
| 9 | INPUT C- | input | Receiver C differential inverting input pin. |
| 10 | INPUT C+ | input | Receiver C differential non-inverting input pin. |
| 11 | OUTPUT C | output | Receiver C output pin. |
| 12 | -ENABLE | input | Gate control (active low). See ENABLE description. |
| 13 | OUTPUT D | output | Receiver D output pin. |
| 14 | INPUT D+ | input | Receiver D differential non-inverting input pin. |
| 15 | INPUT D- | input | Receiver D differential inverting input pin. |
| 16 | VCC | power_in | Power supply pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-16 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Range | 7 | V | 3 | ||||
| Voltage at Any Pin | -0.3 | V | Printed as GND-0.3V to VCC + 0.3V; upper limit is VCC + 0.3V, not a numeric value | 3 | |||
| Storage Temperature | -60 | 160 | C | 3 | |||
| Package Dissipation | 500 | mW | 3 | ||||
| Operating Temperature | -40 | 85 | C | 3 | |||
| Propagation Delay, Input to Output | T1 | 8 | 10 | ns | S1=VCC | 3 | |
| Propagation Delay, Input to Output | T2 | 18 | 20 | ns | S1=GND | 3 | |
| Output Enable Time | T3 | 18 | 20 | ns | VDIF=2.5V | 3 | |
| Output Disable Time | T4 | 18 | 20 | ns | VDIF=2.5V | 3 | |
| Enable High Level | VIH | 2 | V | 3 | |||
| Enable Low Level | VIL | 0.8 | V | 3 | |||
| Output High Level | VOH | 3.8 | V | IOH= -6mA | 3 | ||
| Output Low Level | VOL | 0.4 | V | IOH= 6mA | 3 | ||
| Differential Input Level | VID | -0.2 | 0.2 | V | -7V < VCM < +7V | 3 | |
| Input Hysteresis | VH | 50 | mV | 3 | |||
| Input Current | IIN | 1 | µA | 3 | |||
| Operating Current | ICC | 12 | mA | VDIF=+1V | 3 | ||
| Three-State Output Leakage | IOZ | 1 | 5 | µA | VOUT=VCC or GND | 3 | |
| Enable Input Current | IEN | 1 | µA | VIN=VCC or GND | 3 | ||
| Input Resistance | VR | 5 | 15 | KQ | -7V < VCM < +7V | 3 |
CAD (KiCad official)
- Symbol:
HT26LS32ARZ - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
ht26ls32arz-etched.step/ht26ls32arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht26ls32arz.step/ht26ls32arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (7 pp, sha256
4bc48d9beb2b5020, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).