component
TL084CN
Public Unreviewedby Ray
Texas Instruments FET InputAmplifiers, DIP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownTL084CN
Texas Instruments · FET InputAmplifiers · DIP-14
TL084CN from Texas Instruments, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1. Short-circuit protected; can drive typical op-amp loads within the supply rails (Vcc+ = +5 V to +15 V, Vcc- = -5 V to -15 V). |
| 2 | 1IN- | input | Inverting (negative) input of amplifier 1. High-impedance JFET input; typical input bias current 30 pA. Differential input voltage limited to ±30 V. |
| 3 | 1IN+ | input | Non-inverting (positive) input of amplifier 1. High-impedance JFET input; common-mode range Vcc- + 4 V to Vcc+ - 4 V. |
| 4 | VCC+ | power_in | Positive supply voltage. Recommended operating range +5 V to +15 V; absolute maximum +18 V. Bypass with 0.1 µF to VCC-. |
| 5 | 2IN+ | input | Non-inverting (positive) input of amplifier 2. High-impedance JFET input. |
| 6 | 2IN- | input | Inverting (negative) input of amplifier 2. High-impedance JFET input. |
| 7 | 2OUT | output | Output of amplifier 2. Short-circuit protected. |
| 8 | 3OUT | output | Output of amplifier 3. Short-circuit protected. |
| 9 | 3IN- | input | Inverting (negative) input of amplifier 3. High-impedance JFET input. |
| 10 | 3IN+ | input | Non-inverting (positive) input of amplifier 3. High-impedance JFET input. |
| 11 | VCC- | power_in | Negative supply voltage. Recommended operating range -5 V to -15 V; absolute maximum -18 V. Bypass with 0.1 µF to VCC+. |
| 12 | 4IN+ | input | Non-inverting (positive) input of amplifier 4. High-impedance JFET input. |
| 13 | 4IN- | input | Inverting (negative) input of amplifier 4. High-impedance JFET input. |
| 14 | 4OUT | output | Output of amplifier 4. Short-circuit protected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
TL084CNNTL084CNDTL084CNNSTL084CNPWTL084CNJTL084CNFK
CAD (KiCad official)
- Symbol:
TL084CN - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: DIP-14 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
dfeae4962572ccfb, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).