3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownS9S08DZ60F2MLFR
NXP Semicon · NXP MCU · LQFP-48(7x7)
S9S08DZ60F2MLFR from NXP Semicon, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTB6/PIB6/ADP14 | bidirectional | General-purpose port B bit 6 shared with pin-interrupt input PIB6 and ADC channel 14 (ADP14). |
| 2 | PTA7/PIA7/ADP7/IRQ | bidirectional | General-purpose port A bit 7 shared with pin-interrupt input PIA7, ADC channel 7 (ADP7) and the external interrupt request input IRQ. |
| 3 | PTB7/PIB7/ADP15 | bidirectional | General-purpose port B bit 7 shared with pin-interrupt input PIB7 and ADC channel 15 (ADP15). |
| 4 | VDD | power_in | Primary positive supply for the I/O buffers and internal voltage regulator, to be bypassed with a 0.1 µF ceramic capacitor placed close to the pin. |
| 5 | VSS | power_in | Primary ground return for the MCU supply (VDD). |
| 6 | PTG0/EXTAL | bidirectional | General-purpose port G bit 0 or the external clock/crystal input (EXTAL) of the Pierce oscillator. |
| 7 | PTG1/XTAL | bidirectional | General-purpose port G bit 1 or the crystal output (XTAL) of the Pierce oscillator. |
| 8 | RESET | bidirectional | Dedicated active-low reset pin with built-in pull-up, input hysteresis and a high-current output driver that is driven low for about 34 bus cycles on any reset. |
| 9 | PTF4/ACMP2+ | bidirectional | General-purpose port F bit 4 shared with the analog comparator 2 non-inverting input (ACMP2+). |
| 10 | PTF5/ACMP2- | bidirectional | General-purpose port F bit 5 shared with the analog comparator 2 inverting input (ACMP2-). |
| 11 | PTE0/TxD1 | bidirectional | General-purpose port E bit 0 shared with the SCI1 transmit data output (TxD1). |
| 12 | PTE1/RxD1 | bidirectional | General-purpose port E bit 1 shared with the SCI1 receive data input (RxD1); it has no clamp diode to VDD and must not be driven above VDD. |
| 13 | PTE2/SS | bidirectional | General-purpose port E bit 2 shared with the SPI slave select (SS). |
| 14 | PTE3/SPSCK | bidirectional | General-purpose port E bit 3 shared with the SPI serial clock (SPSCK). |
| 15 | PTE4/SCL/MOSI | bidirectional | General-purpose port E bit 4 shared with the SPI master-out/slave-in data (MOSI) and, when relocated with IICPS, the IIC clock (SCL). |
| 16 | PTE5/SDA/MISO | bidirectional | General-purpose port E bit 5 shared with the SPI master-in/slave-out data (MISO) and, when relocated with IICPS, the IIC data line (SDA). |
| 17 | PTF0/TxD2 | bidirectional | General-purpose port F bit 0 shared with the SCI2 transmit data output (TxD2), which is its default reset location. |
| 18 | PTF1/RxD2 | bidirectional | General-purpose port F bit 1 shared with the SCI2 receive data input (RxD2), which is its default reset location. |
| 19 | PTF2/TPM1CLK/SCL | bidirectional | General-purpose port F bit 2 shared with the TPM1 external clock input (TPM1CLK) and the IIC clock (SCL), which is its default reset location. |
| 20 | PTF3/TPM2CLK/SDA | bidirectional | General-purpose port F bit 3 shared with the TPM2 external clock input (TPM2CLK) and the IIC data line (SDA), which is its default reset location. |
| 21 | PTE6/TxD2/TXCAN | bidirectional | General-purpose port E bit 6 shared with the SCI2 transmit data output (TxD2) and the MSCAN transmit output (TXCAN). |
| 22 | PTE7/RxD2/RXCAN | bidirectional | General-purpose port E bit 7 shared with the SCI2 receive data input (RxD2) and the MSCAN receive input (RXCAN). |
| 23 | PTD0/PID0/TPM2CH0 | bidirectional | General-purpose port D bit 0 shared with pin-interrupt input PID0 and TPM2 channel 0 (TPM2CH0). |
| 24 | PTD1/PID1/TPM2CH1 | bidirectional | General-purpose port D bit 1 shared with pin-interrupt input PID1 and TPM2 channel 1 (TPM2CH1). |
| 25 | PTD2/PID2/TPM1CH0 | bidirectional | General-purpose port D bit 2 shared with pin-interrupt input PID2 and TPM1 channel 0 (TPM1CH0). |
| 26 | PTD3/PID3/TPM1CH1 | bidirectional | General-purpose port D bit 3 shared with pin-interrupt input PID3 and TPM1 channel 1 (TPM1CH1). |
| 27 | PTD4/PID4/TPM1CH2 | bidirectional | General-purpose port D bit 4 shared with pin-interrupt input PID4 and TPM1 channel 2 (TPM1CH2). |
| 28 | PTD5/PID5/TPM1CH3 | bidirectional | General-purpose port D bit 5 shared with pin-interrupt input PID5 and TPM1 channel 3 (TPM1CH3). |
| 29 | VSS | power_in | Second ground pin for the MCU supply, to be bypassed together with its VDD pin. |
| 30 | VDD | power_in | Second positive supply pin, which needs its own bypass capacitor for best noise suppression. |
| 31 | PTD6/PID6/TPM1CH4 | bidirectional | General-purpose port D bit 6 shared with pin-interrupt input PID6 and TPM1 channel 4 (TPM1CH4). |
| 32 | PTD7/PID7/TPM1CH5 | bidirectional | General-purpose port D bit 7 shared with pin-interrupt input PID7 and TPM1 channel 5 (TPM1CH5). |
| 33 | BKGD/MS | bidirectional | Single-wire background debug communication pin that also selects the mode at the rising edge of reset, with an internal pull-up and input hysteresis and no external capacitance allowed. |
| 34 | PTB0/PIB0/ADP8 | bidirectional | General-purpose port B bit 0 shared with pin-interrupt input PIB0 and ADC channel 8 (ADP8). |
| 35 | PTA0/PIA0/ADP0/MCLK | bidirectional | General-purpose port A bit 0 shared with pin-interrupt input PIA0, ADC channel 0 (ADP0) and the MCLK clock output. |
| 36 | PTB1/PIB1/ADP9 | bidirectional | General-purpose port B bit 1 shared with pin-interrupt input PIB1 and ADC channel 9 (ADP9). |
| 37 | PTA1/PIA1/ADP1/ACMP1+ | bidirectional | General-purpose port A bit 1 shared with pin-interrupt input PIA1, ADC channel 1 (ADP1) and the analog comparator 1 non-inverting input (ACMP1+). |
| 38 | PTB2/PIB2/ADP10 | bidirectional | General-purpose port B bit 2 shared with pin-interrupt input PIB2 and ADC channel 10 (ADP10). |
| 39 | PTA2/PIA2/ADP2/ACMP1- | bidirectional | General-purpose port A bit 2 shared with pin-interrupt input PIA2, ADC channel 2 (ADP2) and the analog comparator 1 inverting input (ACMP1-). |
| 40 | PTB3/PIB3/ADP11 | bidirectional | General-purpose port B bit 3 shared with pin-interrupt input PIB3 and ADC channel 11 (ADP11). |
| 41 | PTA3/PIA3/ADP3/ACMP1O | bidirectional | General-purpose port A bit 3 shared with pin-interrupt input PIA3, ADC channel 3 (ADP3) and the analog comparator 1 output (ACMP1O). |
| 42 | VSSA/VREFL | power_in | Analog ground for the ADC, internally connected to the ADC low reference VREFL, to be bypassed with a 0.1 µF ceramic capacitor close to the pin. |
| 43 | VDDA/VREFH | power_in | Analog supply for the ADC, internally connected to the ADC high reference VREFH, to be bypassed with a 0.1 µF ceramic capacitor close to the pin. |
| 44 | PTA4/PIA4/ADP4 | bidirectional | General-purpose port A bit 4 shared with pin-interrupt input PIA4 and ADC channel 4 (ADP4). |
| 45 | PTB4/PIB4/ADP12 | bidirectional | General-purpose port B bit 4 shared with pin-interrupt input PIB4 and ADC channel 12 (ADP12). |
| 46 | PTA5/PIA5/ADP5 | bidirectional | General-purpose port A bit 5 shared with pin-interrupt input PIA5 and ADC channel 5 (ADP5). |
| 47 | PTB5/PIB5/ADP13 | bidirectional | General-purpose port B bit 5 shared with pin-interrupt input PIB5 and ADC channel 13 (ADP13). |
| 48 | PTA6/PIA6/ADP6 | bidirectional | General-purpose port A bit 6 shared with pin-interrupt input PIA6 and ADC channel 6 (ADP6). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
S9S08DZ60F2MLFR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
s9s08dz60f2mlfr-etched.step/s9s08dz60f2mlfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s9s08dz60f2mlfr.step/s9s08dz60f2mlfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (414 pp, sha256
d217b20c25091dc7, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).