3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGP82410
HaloChip · AC-DC Controllers & Regulators · SOT-23-5
GP82410 from HaloChip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground reference for the controller, which the datasheet lists as the GND pin. |
| 2 | GATE | output | Drives the rear-stage MOSFET gate through a soft gate driver, with VOL at most 1 V at 20 mA sink, VOH at least 7.5 V at 20 mA source, and gate clamp 16 V at VDD 24 V. |
| 3 | CS | input | Peak current sense input for cycle-by-cycle limiting, with a constant-current threshold of 588 to 612 mV and 500 ns leading-edge blanking. |
| 4 | FB | input | Output voltage feedback input that samples the auxiliary winding, with a constant-voltage reference of 1.97 to 2.03 V and a cable compensation current of up to 50 uA. |
| 5 | VCC | power_in | Chip supply pin with a start-up voltage of 17 to 20 V, UVLO of 8.5 to 10.5 V, OVP of 23 to 27 V, clamp of 30 to 33 V at 10 mA, and an absolute maximum range of -0.3 to 31 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HaloChip |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC startup voltage (VCC rising) | VCC_SZ | 17 | 19 | 20 | V | VCC上升 | 4 |
| VCC undervoltage lockout threshold (VCC falling) | VCC_UVLO | 8.5 | 9.5 | 10.5 | V | VCC下降 | 4 |
| VCC overvoltage protection value (VCC rising) | VCC_OVP | 23 | 25 | 27 | V | VCC上升 | 4 |
| VCC clamp voltage | VCC_clamp | 30 | 31.5 | 33 | V | Ivcc=10mA | 4 |
| VCC startup current | ISZ | 3 | 20 | uA | VCC= VCC-SZ- 1V | 4 | |
| VCC operating current | Icc | 0.8 | 1.5 | mA | 启动之后 VCC=20V | 4 | |
| Constant-current sense threshold | VCS | 588 | 600 | 612 | mV | 4 | |
| FB feedback reference voltage | VFB | 1.97 | 2 | 2.03 | V | 恒压模式 | 4 |
| Leading-edge blanking time | TLEB | 500 | ns | 4 | |||
| Overcurrent tracking control delay | TD_OC | 100 | ns | CL=0.5nF at GATE | 4 | ||
| Soft-start time | Tsoftstart | 2 | ms | 4 | |||
| Demagnetization comparison threshold | VFB_DEM | 25 | mV | 4 | |||
| Minimum off time | Tmin_OFF | 2 | us | 4 | |||
| Maximum off time | Tmax_OFF | 5 | ms | 4 | |||
| Output short threshold | VFB_Short | 0.9 | V | 4 | |||
| Output short protection time | TFB_Short | 13 | ms | 4 | |||
| Ratio of CC-mode switching period to demagnetization time | TCC/TDEM | 2 | CC 模式开关周期与消磁时间比值 | 4 | |||
| Maximum cable compensation current | Icablemax | 50 | uA | 4 | |||
| Output low level | VOL | 1 | V | Io = 20 mA (抽流) | 4 | ||
| Output high level | VOH | 7.5 | V | Io = 20 mA (供流) | 5 | ||
| Output clamp voltage | VG_Clamp | 16 | V | VDD=24V | 5 | ||
| Output rise time | T_r | 700 | ns | CL = 0.5nF | 5 | ||
| Output fall time | T_f | 35 | ns | CL = 0.5nF | 5 | ||
| VCC supply voltage | VCC | -0.3 | 31 | V | 3 | ||
| VCC clamp current | 10 | mA | 3 | ||||
| CS and FB pin voltage | -0.3 | 7 | V | 3 | |||
| GATE pin voltage | 20 | V | 3 | ||||
| Maximum junction temperature | 150 | ℃ | 3 | ||||
| Operating temperature | -40 | 85 | ℃ | 3 | |||
| Storage temperature | -55 | 150 | ℃ | 3 | |||
| Reflow soldering maximum temperature | 260 | ℃ | 时长短于 10s | 3 | |||
| ESD human body model | 2.5 | KV | 3 | ||||
| Maximum switching frequency | 70 | Khz | 3 | ||||
| Thermal resistance (SOP23-5) | 300 | ℃/W | 3 |
CAD (KiCad official)
- Symbol:
GP82410 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
gp82410-etched.step/gp82410-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp82410.step/gp82410.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HaloChip datasheet (10 pp, sha256
9b128f0020d96cf1, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).