3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMK20DX256VLH7
NXP Semicon · NXP MCU · LQFP-64(10x10)
MK20DX256VLH7 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | GPIO port E bit 0 with default ADC1_SE4a, and ALT3 UART1_TX, ALT4 I2C1_SDA, ALT7 RTC_CLKOUT. |
| 2 | PTE1/LLWU_P0 | bidirectional | GPIO port E bit 1 and wakeup input LLWU_P0 with default ADC1_SE5a, and ALT3 UART1_RX, ALT4 I2C1_SCL. |
| 3 | VDD | power_in | Digital supply pin, operating range 1.71 to 3.6 V. |
| 4 | VSS | power_in | Digital ground pin. |
| 5 | USB0_DP | bidirectional | USB0 full-/low-speed on-chip transceiver D+ data line. |
| 6 | USB0_DM | bidirectional | USB0 full-/low-speed on-chip transceiver D- data line. |
| 7 | VOUT33 | power_out | USB voltage regulator 3.3 V output (VOUT33). |
| 8 | VREGIN | power_in | USB voltage regulator input (VREGIN). |
| 9 | PGA0_DP/ADC0_DP0/ADC1_DP3 | input | Analog pin shared by PGA0 positive input and ADC0 DP0 / ADC1 DP3 differential positive inputs. |
| 10 | PGA0_DM/ADC0_DM0/ADC1_DM3 | input | Analog pin shared by PGA0 negative input and ADC0 DM0 / ADC1 DM3 differential negative inputs. |
| 11 | PGA1_DP/ADC1_DP0/ADC0_DP3 | input | Analog pin shared by PGA1 positive input and ADC1 DP0 / ADC0 DP3 differential positive inputs. |
| 12 | PGA1_DM/ADC1_DM0/ADC0_DM3 | input | Analog pin shared by PGA1 negative input and ADC1 DM0 / ADC0 DM3 differential negative inputs. |
| 13 | VDDA | power_in | Analog supply pin. |
| 14 | VREFH | power_in | ADC voltage reference high pin. |
| 15 | VREFL | power_in | ADC voltage reference low pin. |
| 16 | VSSA | power_in | Analog ground pin. |
| 17 | VREF_OUT/CMP1_IN5/CMP0_IN5/ADC1_SE18 | bidirectional | Voltage reference output shared with comparator inputs CMP1_IN5, CMP0_IN5 and ADC1_SE18. |
| 18 | DAC0_OUT/CMP1_IN3/ADC0_SE23 | bidirectional | 12-bit DAC0 output shared with comparator input CMP1_IN3 and ADC0_SE23. |
| 19 | XTAL32 | output | 32 kHz crystal oscillator XTAL32 pin. |
| 20 | EXTAL32 | input | 32 kHz crystal oscillator EXTAL32 pin. |
| 21 | VBAT | power_in | Backup battery supply for the RTC and VBAT register file. |
| 22 | PTA0 | bidirectional | GPIO port A bit 0 with default JTAG_TCLK/SWD_CLK/EZP_CLK, and ALT1 TSI0_CH1, ALT3 UART0_CTS_b/UART0_COL_b, ALT4 FTM0_CH5. |
| 23 | PTA1 | bidirectional | GPIO port A bit 1 with default JTAG_TDI/EZP_DI, and ALT1 TSI0_CH2, ALT3 UART0_RX, ALT4 FTM0_CH6. |
| 24 | PTA2 | bidirectional | GPIO port A bit 2 with default JTAG_TDO/TRACE_SWO/EZP_DO, and ALT1 TSI0_CH3, ALT3 UART0_TX, ALT4 FTM0_CH7. |
| 25 | PTA3 | bidirectional | GPIO port A bit 3 with default JTAG_TMS/SWD_DIO, and ALT1 TSI0_CH4, ALT3 UART0_RTS_b, ALT4 FTM0_CH0. |
| 26 | PTA4/LLWU_P3 | bidirectional | GPIO port A bit 4 and wakeup input LLWU_P3 with default NMI_b/EZP_CS_b, and ALT1 TSI0_CH5, ALT3 FTM0_CH1. |
| 27 | PTA5 | bidirectional | GPIO port A bit 5, default DISABLED, with ALT2 USB_CLKIN, ALT3 FTM0_CH2, ALT4 CMP2_OUT, ALT5 I2S0_TX_BCLK, ALT7 JTAG_TRST_b. |
| 28 | PTA12 | bidirectional | GPIO port A bit 12 with default CMP2_IN0, and ALT2 CAN0_TX, ALT3 FTM1_CH0, ALT4 I2S0_TXD0, ALT7 FTM1_QD_PHA. |
| 29 | PTA13/LLWU_P4 | bidirectional | GPIO port A bit 13 and wakeup input LLWU_P4 with default CMP2_IN1, and ALT2 CAN0_RX, ALT3 FTM1_CH1, ALT4 I2S0_TX_FS, ALT7 FTM1_QD_PHB. |
| 30 | VDD | power_in | Digital supply pin, operating range 1.71 to 3.6 V. |
| 31 | VSS | power_in | Digital ground pin. |
| 32 | PTA18 | bidirectional | GPIO port A bit 18 with default EXTAL0 (main oscillator input), and ALT3 FTM0_FLT2, ALT4 FTM_CLKIN0. |
| 33 | PTA19 | bidirectional | GPIO port A bit 19 with default XTAL0 (main oscillator output), and ALT3 FTM1_FLT0, ALT4 FTM_CLKIN1, ALT6 LPTMR0_ALT1. |
| 34 | RESET_b | bidirectional | External reset pin (RESET_b). |
| 35 | PTB0/LLWU_P5 | bidirectional | GPIO port B bit 0 and wakeup input LLWU_P5 with default ADC0_SE8/ADC1_SE8/TSI0_CH0, and ALT2 I2C0_SCL, ALT3 FTM1_CH0, ALT6 FTM1_QD_PHA. |
| 36 | PTB1 | bidirectional | GPIO port B bit 1 with default ADC0_SE9/ADC1_SE9/TSI0_CH6, and ALT2 I2C0_SDA, ALT3 FTM1_CH1, ALT6 FTM1_QD_PHB. |
| 37 | PTB2 | bidirectional | GPIO port B bit 2 with default ADC0_SE12/TSI0_CH7, and ALT2 I2C0_SCL, ALT3 UART0_RTS_b, ALT6 FTM0_FLT3. |
| 38 | PTB3 | bidirectional | GPIO port B bit 3 with default ADC0_SE13/TSI0_CH8, and ALT2 I2C0_SDA, ALT3 UART0_CTS_b/UART0_COL_b, ALT6 FTM0_FLT0. |
| 39 | PTB16 | bidirectional | GPIO port B bit 16 with default TSI0_CH9, and ALT3 UART0_RX, ALT5 FB_AD17, ALT6 EWM_IN. |
| 40 | PTB17 | bidirectional | GPIO port B bit 17 with default TSI0_CH10, and ALT3 UART0_TX, ALT5 FB_AD16, ALT6 EWM_OUT_b. |
| 41 | PTB18 | bidirectional | GPIO port B bit 18 with default TSI0_CH11, and ALT2 CAN0_TX, ALT3 FTM2_CH0, ALT4 I2S0_TX_BCLK, ALT5 FB_AD15, ALT6 FTM2_QD_PHA. |
| 42 | PTB19 | bidirectional | GPIO port B bit 19 with default TSI0_CH12, and ALT2 CAN0_RX, ALT3 FTM2_CH1, ALT4 I2S0_TX_FS, ALT5 FB_OE_b, ALT6 FTM2_QD_PHB. |
| 43 | PTC0 | bidirectional | GPIO port C bit 0 with default ADC0_SE14/TSI0_CH13, and ALT2 SPI0_PCS4, ALT3 PDB0_EXTRG, ALT5 FB_AD14, ALT6 I2S0_TXD1. |
| 44 | PTC1/LLWU_P6 | bidirectional | GPIO port C bit 1 and wakeup input LLWU_P6 with default ADC0_SE15/TSI0_CH14, and ALT2 SPI0_PCS3, ALT3 UART1_RTS_b, ALT4 FTM0_CH0, ALT5 FB_AD13, ALT6 I2S0_TXD0. |
| 45 | PTC2 | bidirectional | GPIO port C bit 2 with default ADC0_SE4b/CMP1_IN0/TSI0_CH15, and ALT2 SPI0_PCS2, ALT3 UART1_CTS_b, ALT4 FTM0_CH1, ALT5 FB_AD12, ALT6 I2S0_TX_FS. |
| 46 | PTC3/LLWU_P7 | bidirectional | GPIO port C bit 3 and wakeup input LLWU_P7 with default CMP1_IN1, and ALT2 SPI0_PCS1, ALT3 UART1_RX, ALT4 FTM0_CH2, ALT5 CLKOUT, ALT6 I2S0_TX_BCLK. |
| 47 | VSS | power_in | Digital ground pin. |
| 48 | VDD | power_in | Digital supply pin, operating range 1.71 to 3.6 V. |
| 49 | PTC4/LLWU_P8 | bidirectional | GPIO port C bit 4 and wakeup input LLWU_P8, default DISABLED, with ALT2 SPI0_PCS0, ALT3 UART1_TX, ALT4 FTM0_CH3, ALT5 FB_AD11, ALT6 CMP1_OUT. |
| 50 | PTC5/LLWU_P9 | bidirectional | GPIO port C bit 5 and wakeup input LLWU_P9, default DISABLED, with ALT2 SPI0_SCK, ALT3 LPTMR0_ALT2, ALT4 I2S0_RXD0, ALT5 FB_AD10, ALT6 CMP0_OUT. |
| 51 | PTC6/LLWU_P10 | bidirectional | GPIO port C bit 6 and wakeup input LLWU_P10 with default CMP0_IN0, and ALT2 SPI0_SOUT, ALT3 PDB0_EXTRG, ALT4 I2S0_RX_BCLK, ALT5 FB_AD9, ALT6 I2S0_MCLK. |
| 52 | PTC7 | bidirectional | GPIO port C bit 7 with default CMP0_IN1, and ALT2 SPI0_SIN, ALT3 USB_SOF_OUT, ALT4 I2S0_RX_FS, ALT5 FB_AD8. |
| 53 | PTC8 | bidirectional | GPIO port C bit 8 with default ADC1_SE4b/CMP0_IN2, and ALT4 I2S0_MCLK, ALT5 FB_AD7. |
| 54 | PTC9 | bidirectional | GPIO port C bit 9 with default ADC1_SE5b/CMP0_IN3, and ALT4 I2S0_RX_BCLK, ALT5 FB_AD6, ALT6 FTM2_FLT0. |
| 55 | PTC10 | bidirectional | GPIO port C bit 10 with default ADC1_SE6b, and ALT2 I2C1_SCL, ALT4 I2S0_RX_FS, ALT5 FB_AD5. |
| 56 | PTC11/LLWU_P11 | bidirectional | GPIO port C bit 11 and wakeup input LLWU_P11 with default ADC1_SE7b, and ALT2 I2C1_SDA, ALT4 I2S0_RXD1, ALT5 FB_RW_b. |
| 57 | PTD0/LLWU_P12 | bidirectional | GPIO port D bit 0 and wakeup input LLWU_P12, default DISABLED, with ALT2 SPI0_PCS0, ALT3 UART2_RTS_b, ALT5 FB_ALE/FB_CS1_b/FB_TS_b. |
| 58 | PTD1 | bidirectional | GPIO port D bit 1 with default ADC0_SE5b, and ALT2 SPI0_SCK, ALT3 UART2_CTS_b, ALT5 FB_CS0_b. |
| 59 | PTD2/LLWU_P13 | bidirectional | GPIO port D bit 2 and wakeup input LLWU_P13, default DISABLED, with ALT2 SPI0_SOUT, ALT3 UART2_RX, ALT5 FB_AD4. |
| 60 | PTD3 | bidirectional | GPIO port D bit 3, default DISABLED, with ALT2 SPI0_SIN, ALT3 UART2_TX, ALT5 FB_AD3. |
| 61 | PTD4/LLWU_P14 | bidirectional | GPIO port D bit 4 and wakeup input LLWU_P14, default DISABLED, with ALT2 SPI0_PCS1, ALT3 UART0_RTS_b, ALT4 FTM0_CH4, ALT5 FB_AD2, ALT6 EWM_IN. |
| 62 | PTD5 | bidirectional | GPIO port D bit 5 with default ADC0_SE6b, and ALT2 SPI0_PCS2, ALT3 UART0_CTS_b/UART0_COL_b, ALT4 FTM0_CH5, ALT5 FB_AD1, ALT6 EWM_OUT_b. |
| 63 | PTD6/LLWU_P15 | bidirectional | GPIO port D bit 6 and wakeup input LLWU_P15 with default ADC0_SE7b, and ALT2 SPI0_PCS3, ALT3 UART0_RX, ALT4 FTM0_CH6, ALT5 FB_AD0, ALT6 FTM0_FLT0. |
| 64 | PTD7 | bidirectional | GPIO port D bit 7, default DISABLED, with ALT2 CMT_IRO, ALT3 UART0_TX, ALT4 FTM0_CH7, ALT5 FTM0_FLT1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 1.71 | 3.6 | V | 11 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 11 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 11 | ||
| RTC battery supply voltage | VBAT | 1.71 | 3.6 | V | 11 | ||
| Input high voltage | VIH | 0.7 | V | 2.7 V ≤ VDD ≤ 3.6 V; min printed as 0.7 × VDD | 11 | ||
| Input hysteresis | VHYS | 0.06 | V | min printed as 0.06 × VDD | 11 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 9 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 9 | |||
| ESD HBM | VHBM | -2000 | 2000 | V | 9 | ||
| ESD CDM | VCDM | -500 | 500 | V | 9 | ||
| Latch-up current | ILAT | -100 | 100 | mA | ambient 105°C | 9 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 9 | ||
| Digital supply current | IDD | 185 | mA | 10 | |||
| Digital input voltage | VDIO | -0.3 | 5.5 | V | except RESET, EXTAL, XTAL | 10 | |
| Max current single pin | ID | -25 | 25 | mA | all digital pins | 10 | |
| USB_DP input voltage | VUSB_DP | -0.3 | 3.63 | V | 10 | ||
| USB regulator input | VREGIN | -0.3 | 6 | V | 10 | ||
| RTC battery supply voltage | VBAT | -0.3 | 3.8 | V | 10 | ||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 12 | |
| Falling LVD threshold high range | VLVDH | 2.48 | 2.56 | 2.64 | V | LVDV=01 | 12 |
| Falling LVD threshold low range | VLVDL | 1.54 | 1.6 | 1.66 | V | LVDV=00 | 12 |
| Bandgap voltage reference | VBG | 0.97 | 1 | 1.03 | V | 12 | |
| Internal low power oscillator period | tLPO | 900 | 1000 | 1100 | μs | factory trimmed | 12 |
| Falling VBAT POR detect voltage | VPOR_VBAT | 0.8 | 1.1 | 1.5 | V | 12 | |
| ADC supply voltage | VDDA | 1.71 | 3.6 | V | Absolute | 37 | |
| ADC supply current | IDDA_ADC | 0.215 | 1.7 | mA | 38 | ||
| USB regulator input supply voltage | VREGIN | 2.7 | 5.5 | V | 51 | ||
| USB VREG run mode quiescent current | IDDon | 120 | 186 | μA | Run mode, load current zero, VREGIN > 3.6 V | 51 | |
| USB VREG max load current run mode | ILOADrun | 120 | mA | Run mode | 51 |
CAD (KiCad official)
- Symbol:
MK20DX256VLH7 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mk20dx256vlh7-etched.step/mk20dx256vlh7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mk20dx256vlh7.step/mk20dx256vlh7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (67 pp, sha256
1c30cce4ece1669e, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).