Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

LM2902Q4T

STMicroelectronics · Operational Amplifier · QFN-16-EP(3x3)

LM2902Q4T from STMicroelectronics, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1+ input Non-inverting input of op-amp 1. Common-mode input range includes the negative rail up to (VCC+)-1.5 V; low input bias current (~20 nA typ).
2 VCC+ power_in Positive supply rail. Single-supply operation 3 V to 30 V, or +1.5 V to +15 V split supply. Absolute maximum 32 V.
3 NC unconnected No internal connection. Present on QFN16 3x3 only (added for package symmetry vs. the SO14/TSSOP14 pinout).
4 IN2+ input Non-inverting input of op-amp 2. Common-mode input range includes the negative rail up to (VCC+)-1.5 V.
5 IN2- input Inverting input of op-amp 2. Low input bias current (~20 nA typ), input offset current ~2 nA.
6 OUT2 output Op-amp 2 output. Output swing to within ~20 mV of the negative rail (single-supply); short-circuit current limited to ~20 mA typ.
7 OUT3 output Op-amp 3 output. Output swing to within ~20 mV of the negative rail (single-supply); short-circuit current limited to ~20 mA typ.
8 IN3- input Inverting input of op-amp 3. Low input bias current (~20 nA typ).
9 IN3+ input Non-inverting input of op-amp 3. Common-mode input range includes the negative rail up to (VCC+)-1.5 V.
10 NC unconnected No internal connection. Present on QFN16 3x3 only (added for package symmetry vs. the SO14/TSSOP14 pinout).
11 VCC- power_in Negative supply rail / ground for single-supply operation. Tie to GND for 3 V-30 V single-supply, or -1.5 V to -15 V for split-supply operation.
12 IN4+ input Non-inverting input of op-amp 4. Common-mode input range includes the negative rail up to (VCC+)-1.5 V.
13 IN4- input Inverting input of op-amp 4. Low input bias current (~20 nA typ).
14 OUT4 output Op-amp 4 output. Output swing to within ~20 mV of the negative rail (single-supply); short-circuit current limited to ~20 mA typ.
15 OUT1 output Op-amp 1 output. Output swing to within ~20 mV of the negative rail (single-supply); short-circuit current limited to ~20 mA typ.
16 IN1- input Inverting input of op-amp 1. Low input bias current (~20 nA typ), input offset current ~2 nA.
EP EP power_in Exposed thermal pad on the QFN16 3x3 underside. Per datasheet note, may be connected to VCC- or left floating. Connecting to VCC- is recommended for improved thermal dissipation.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package QFN-16-EP(3x3)
Category Op-amp/Cmp
Pins 17

Ordering variants

  • LM2902Q4T
  • LM2902Q4TD
  • LM2902Q4TDT
  • LM2902Q4TYDT
  • LM2902Q4TPT
  • LM2902Q4TYPT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage Vio 2 7 mV Tamb = 25 °C 7
Input offset voltage Vio 9 mV Tmin ≤ Tamb ≤ Tmax 7
Input offset voltage drift ΔVio/ΔT 7 30 µV/°C 7
Input offset current Iio 2 30 nA Tamb = 25 °C 7
Input offset current Iio 40 nA Tmin ≤ Tamb ≤ Tmax 7
Input offset current drift ΔIio 10 200 pA/°C 7
Input bias current Iib 20 150 nA Tamb = 25 °C 7
Input bias current Iib 300 nA Tmin ≤ Tamb ≤ Tmax 7
Large signal voltage gain Avd 50 100 V/mV VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tamb = 25 °C 7
Large signal voltage gain Avd 25 V/mV VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tmin ≤ Tamb ≤ Tmax 7
Supply voltage rejection ratio SVR 65 110 dB RS ≤ 10 kΩ, Tamb = 25 °C 7
Supply voltage rejection ratio SVR 65 dB RS ≤ 10 kΩ, Tmin ≤ Tamb ≤ Tmax 7
Supply current, all op amps, no load ICC 0.7 1.2 mA Tamb = 25 °C, VCC+ = 5 V 7
Supply current, all op amps, no load ICC 1.5 3 mA Tamb = 25 °C, VCC+ = 30 V 7
Supply current, all op amps, no load ICC 0.8 1.2 mA Tmin ≤ Tamb ≤ Tmax, VCC+ = 5 V 7
Common-mode rejection ratio CMR 70 80 dB RS ≤ 10 kΩ, Tamb = 25 °C 7
Common-mode rejection ratio CMR 60 dB RS ≤ 10 kΩ, Tmin ≤ Tamb ≤ Tmax 7
Output short-circuit current Io 20 40 70 mA Vid = 1 V, VCC+ = 15 V, Vo = 2 V 7
Output sink current Isink 10 20 mA Vid = -1 V, VCC+ = 15 V, Vo = 2 V 7
Output sink current Isink 12 50 µA Vid = -1 V, VCC+ = 15 V, Vo = 0.2 V 7
High-level output voltage VOH 26 27 V VCC+ = 30 V, RL = 2 kΩ, Tamb = 25 °C 7
High-level output voltage VOH 26 V VCC+ = 30 V, RL = 2 kΩ, Tmin ≤ Tamb ≤ Tmax 7
High-level output voltage VOH 27 28 V VCC+ = 30 V, RL = 10 kΩ, Tamb = 25 °C 7
High-level output voltage VOH 27 V VCC+ = 30 V, RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax 7
High-level output voltage VOH 3 V VCC+ = 5 V, RL = 2 kΩ, Tamb = 25 °C 7
High-level output voltage VOH 3.5 V VCC+ = 5 V, RL = 2 kΩ, Tmin ≤ Tamb ≤ Tmax 7
Low-level output voltage VOL 5 20 mV RL = 10 kΩ, Tamb = 25 °C 7
Low-level output voltage VOL 20 mV RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax 7
Supply voltage (absolute maximum, printed as ± 16 to 32) VCC 32 V Notes (1): all voltages referenced to network ground 5
Differential input voltage Vid 32 V Non-inverting input with respect to inverting input (note 2) 5
Input voltage Vin -0.3 32 V 5
Maximum junction temperature Tj 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Input current, Vin driven negative Iin 5 mA DC (note 4) 5
Input current, Vin driven negative Iin 50 mA AC (duty cycle = 10 %, T = 1 s) (note 4) 5
Input current, Vin driven positive above AMR value Iin 0.4 mA Note 5 5
ESD human body model HBM 370 V Human body model (note 7) 5
ESD machine model MM 150 V Machine model (note 8) 5
ESD charged device model CDM 1500 V Charged device model (note 9) 5
Supply voltage VCC 3 30 V 6
Operating free-air temperature range Toper -40 125 °C 6
Thermal resistance junction-to-ambient, QFN16 3x3 Rthja 45 °C/W Typical value (note 6) 5
Thermal resistance junction-to-case, QFN16 3x3 Rthjc 14 °C/W Typical value (note 6) 5

CAD (KiCad official)

  • Symbol: LM2902Q4T
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lm2902q4t-etched.step / lm2902q4t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2902q4t.step / lm2902q4t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 16bd5247548a2b49, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF