3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32C011F6P7TR
STMicroelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
STM32C011F6P7TR from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB7 | bidirectional | 5 V-tolerant FT_f I/O on PB7 (Fm+ capable) with alternate functions including USART1_RX, I2C1_SDA and I2C1_SCL and additional function RTC_REFIN. |
| 2 | PC14-OSCX_IN | bidirectional | 5 V-tolerant FT_f I/O on PC14 that also serves as the OSCX_IN oscillator input, with alternate functions such as USART1_TX and I2C1_SDA. |
| 3 | PC15-OSCX_OUT | bidirectional | 5 V-tolerant FT I/O on PC15 that also serves as the OSCX_OUT oscillator output, with alternate functions OSC32_EN, OSC_EN and TIM1_ETR. |
| 4 | VDD/VDDA | power_in | Supply pin for the standard operating voltage VDD of 2.0 V to 3.6 V, also supplying the analog VDDA domain. |
| 5 | VSS/VSSA | power_in | Ground pin for the digital supply VSS and the analog supply VSSA. |
| 6 | PF2-NRST | bidirectional | Reset pin with embedded weak pull-up resistor (RST structure) that behaves as an FT GPIO when PF2 is configured, with MCO and TIM1_CH4 alternate functions. |
| 7 | PA0 | bidirectional | 5 V-tolerant FT_a I/O on PA0 with analog-switch function, providing ADC_IN0 and WKUP1 additional functions and USART2_CTS and TIM16_CH1 alternate functions. |
| 8 | PA1 | bidirectional | 5 V-tolerant FT_a I/O on PA1 providing ADC_IN1 analog input, with alternate functions including SPI1_SCK/I2S1_CK and USART1_RX. |
| 9 | PA2 | bidirectional | 5 V-tolerant FT_a I/O on PA2 providing ADC_IN2 and WKUP4 additional functions, with alternate functions SPI1_MOSI/I2S1_SD and USART2_TX. |
| 10 | PA3 | bidirectional | 5 V-tolerant FT_a I/O on PA3 providing ADC_IN3 analog input, with alternate functions USART2_RX and TIM1_CH1N. |
| 11 | PA4 | bidirectional | 5 V-tolerant FT_a I/O on PA4 providing ADC_IN4, RTC_TS, RTC_OUT1 and WKUP2 additional functions, with alternate function SPI1_NSS/I2S1_WS. |
| 12 | PA5 | bidirectional | 5 V-tolerant FT_a I/O on PA5 providing ADC_IN5 analog input, with alternate functions SPI1_SCK/I2S1_CK and USART2_RX. |
| 13 | PA6 | bidirectional | 5 V-tolerant FT_a I/O on PA6 providing ADC_IN6 analog input, with alternate functions SPI1_MISO/I2S1_MCK and TIM3_CH1. |
| 14 | PA7 | bidirectional | 5 V-tolerant FT_a I/O on PA7 providing ADC_IN7 analog input, with alternate functions SPI1_MOSI/I2S1_SD and TIM3_CH2. |
| 15 | PA8 | bidirectional | 5 V-tolerant FT_a I/O on PA8 providing ADC_IN8 analog input, with alternate functions MCO and USART2_TX. |
| 16 | PA11 [PA9] | bidirectional | 5 V-tolerant FT_a I/O on PA11 (default mapping; PA9 can be remapped here via SYSCFG_CFGR1) providing ADC_IN11, with alternate functions SPI1_MISO/I2S1_MCK and USART1_CTS. |
| 17 | PA12 [PA10] | bidirectional | 5 V-tolerant FT_a I/O on PA12 (default mapping; PA10 can be remapped here via SYSCFG_CFGR1) providing ADC_IN12, with alternate functions SPI1_MOSI/I2S1_SD and USART1_RTS_DE_CK. |
| 18 | PA13 | bidirectional | 5 V-tolerant FT_a I/O on PA13 that is configured as SWDIO after reset with the internal pull-up activated, with alternate functions IR_OUT and USART2_RX. |
| 19 | PA14-BOOT0 | bidirectional | 5 V-tolerant FT_a I/O on PA14 that is configured as SWCLK after reset with the internal pull-down activated, and also serves as the BOOT0 boot-mode pin. |
| 20 | PB6 | bidirectional | 5 V-tolerant FT_f I/O on PB6 (Fm+ capable) with alternate functions including USART1_TX, I2C1_SCL and TIM1_CH3 and additional function WKUP3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating voltage | VDD | 2 | 3.6 | V | 37 | ||
| Ambient temperature, suffix 7 | TA | -40 | 105 | °C | Suffix 7 | 37 | |
| Junction temperature, suffix 7 | TJ | -40 | 125 | °C | Suffix 7 | 37 | |
| AHB clock frequency | fHCLK | 48 | MHz | 37 | |||
| APB clock frequency | fPCLK | 48 | MHz | 37 | |||
| I/O input voltage | VIN | -0.3 | V | Max is Min(VDDIO1 + 3.6, 5.5) | 37 | ||
| External supply voltage | VDD | -0.3 | 4 | V | 36 | ||
| Current into VDD/VDDA power pin (source) | IVDD/VDDA | 100 | mA | 36 | |||
| Current out of VSS/VSSA ground pin (sink) | IVSS/VSSA | 100 | mA | 36 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 20 | mA | 36 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 36 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 36 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | 80 | mA | 36 | |||
| Injected current on a FT_xx pin | IINJ(PIN) | -5 | mA | Negative injection; positive not applicable (NA) | 36 | ||
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | mA | 36 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 36 | ||
| Maximum junction temperature | TJ | 130 | °C | 36 | |||
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 270 | 500 | µs | VDD rising | 37 | |
| Power-on reset threshold | VPOR | 1.9 | 1.94 | 1.98 | V | 37 | |
| Power-down reset threshold | VPDR | 1.88 | 1.92 | 1.96 | V | 37 | |
| Brownout reset threshold 1, VDD rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 37 |
| Brownout reset threshold 1, VDD falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 37 |
| Brownout reset threshold 2, VDD rising | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 37 |
| Brownout reset threshold 2, VDD falling | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 37 |
| Brownout reset threshold 3, VDD rising | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 37 |
| Brownout reset threshold 3, VDD falling | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 37 |
| Brownout reset threshold 4, VDD rising | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 37 |
| Brownout reset threshold 4, VDD falling | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 37 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | 38 | |
| Internal reference voltage spread over the temperature range | ΔVREFINT | 30 | 50 | mV | VDD = 3 V | 38 | |
| Average temperature coefficient | TCoeff | 20 | 70 | ppm/°C | 38 | ||
| Long term stability | ACoeff | 300 | 1000 | ppm | 1000 hours, T = 25 °C | 38 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 38 | |
| Supply current in Run mode from flash, 48 MHz, 105 °C | IDD(Run) | 3.25 | 4.1 | mA | fHCLK = 48 MHz from flash; typ at VDD = 3.0 V, max at VDD = 3.6 V | 40 | |
| Supply current in Stop mode, all clocks off, 105 °C | IDD(Stop) | 180 | 610 | µA | All clocks off; typ at VDD = 3 V, max at 105 °C | 45 | |
| I/O input hysteresis | Vhys | 200 | mV | 60 | |||
| Weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 60 |
| Weak pull-down equivalent resistor | RPD | 25 | 40 | 55 | kΩ | VIN = VDDIO1 | 60 |
| I/O pin capacitance | CIO | 5 | pF | 60 | |||
| Output low level voltage, CMOS port | VOL | 0.4 | V | CMOS port, /IIO/ = 8 mA, VDDIO1 ≥ 2.7 V | 62 | ||
| Output high level voltage, TTL port | VOH | 2.4 | V | 62 | |||
| Output low level voltage, all I/Os | VOL | 1.3 | V | /IIO/ = 20 mA, VDDIO1 ≥ 2.7 V | 62 | ||
| Output low level voltage, all I/Os | VOL | 0.45 | V | /IIO/ = 4 mA, VDDIO1 ≥ 2.0 V | 62 | ||
| NRST weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 64 |
| NRST input filtered pulse | VF(NRST) | 70 | ns | 2.0 V < VDD < 3.6 V | 64 | ||
| NRST input not filtered pulse | VNF(NRST) | 350 | ns | 2.0 V < VDD < 3.6 V | 64 | ||
| HSI48 Frequency | fHSI48 | 47.92 | 48.4 | MHz | VDD = 3.0 V, TA = 30 °C | 54 | |
| HSI48 oscillator frequency drift over temperature and VDD full voltage range | ΔTemp(HSI) | -1 | 1 | % | TA = 0 to 85 °C | 54 | |
| HSI48 oscillator frequency drift over temperature and VDD full voltage range | ΔTemp(HSI) | -2.5 | 2 | % | TA = -40 to 125 °C | 54 | |
| HSI48 duty cycle | DHSI48 | 45 | 55 | % | 54 | ||
| LSI frequency | fLSI | 29.5 | 34 | kHz | VDD = 2 V to 3.6 V, TA = -40 to 125 °C | 55 | |
| Endurance | NEND | 10 | kcycles | TJ = -40 to +130 °C | 56 | ||
| High-speed external oscillator frequency | fOSC_IN | 4 | 48 | MHz | 51 | ||
| Feedback resistor | RF | 200 | kΩ | 51 | |||
| Analog supply voltage | VDDA | 2 | 3.6 | V | 65 | ||
| ADC clock frequency | fADC | 0.14 | 35 | MHz | 65 | ||
| Average slope from VSENSE voltage | Avg_Slope | 2.4 | 2.53 | 2.65 | mV/°C | 70 | |
| Voltage at 30°C (±5 °C) | V30 | 0.742 | 0.76 | 0.786 | V | 70 | |
| Output low level voltage, TTL port | VOL | 0.4 | V | TTL port, /IIO/ = 8 mA, VDDIO1 ≥ 2.7 V | 62 |
CAD (KiCad official)
- Symbol:
STM32C011F6P7TR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
stm32c011f6p7tr-etched.step/stm32c011f6p7tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32c011f6p7tr.step/stm32c011f6p7tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (97 pp, sha256
e392b1542086b25f, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).