component
SSP6201P302PR
Public Made by Adomby adom
Shanghai Siproin Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSSP6201P302PR
Shanghai Siproin Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3L
SSP6201P302PR from Shanghai Siproin Microelectronics, in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated 3.0V output (±2%) delivering 250mA typ. (500mA max.) with Vin-Vout=1V, with a 1uF tantalum or 6.8uF ceramic output capacitor recommended. |
| 2 | VSS | power_in | Ground pin of the regulator, connected to circuit ground. |
| 3 | VIN | power_in | Supply input rated up to 15V (absolute maximum, -0.3V minimum), with a 1uF input capacitor recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-89-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (tolerance) | Vout | -2 | 2 | % | Printed as tolerance ±2% in part number designator ③=2 (nominal Vout = 3.0V for this MPN); electrical table gives Vout×0.98 to Vout×1.02 for Vin=Vout+1V, 1.0mA≤Iout≤30mA | 2 | |
| Output Current | Iout | 250 | 500 | mA | Vin-Vout=1V | 4 | |
| Line Regulation | 0.05 | 0.2 | %/V | 1.6V≤Vin≤8V, Iout=100mA | 4 | ||
| Load Regulation | △Vout | 12 | 30 | mV | Vin=Vout+1V, 1.0mA≤Iout≤100mA | 4 | |
| Dropout Voltage | Vdif | 0.12 | 0.14 | V | 2.0 < Vout ≤ 3.0; Iout=80 mA (row applicable to 3.0V output) | 4 | |
| Input Voltage | Vin | 15 | V | 4 | |||
| Supply Voltage (absolute maximum) | Vin | -0.3 | 15 | V | 3 | ||
| Output voltage temperature coefficient | Ta VOUT | -100 | 100 | PPM/℃ | Iout=30mA, 0℃≤Ta≤70℃; printed ±100 | 4 | |
| Operating Temperature | -40 | 85 | ℃ | 3 | |||
| Storage Temperature | -40 | 125 | ℃ | 3 | |||
| Power Supply Rejection Ratio | PSRR | 40 | dB | F=1KHz, Vin=Vout+1V | 4 | ||
| Supply Current | Iss1 | 2 | uA | 4 |
CAD (KiCad official)
- Symbol:
SSP6201P302PR - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3L (KiCad packages3D, STEP)
- 3D model files:
ssp6201p302pr-etched.step/ssp6201p302pr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ssp6201p302pr.step/ssp6201p302pr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (6 pp, sha256
97da1122b84e3b71, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).