component
DS8404-33A3
Public Made by Adomby adom
DSTECH Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownDS8404-33A3
DSTECH · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
DS8404-33A3 from DSTECH, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input of supply voltage, operating range 2.5V to 36V (absolute maximum 40V), with a 1uF or larger capacitor placed close to VIN and GND. |
| 2 | GND | power_in | Ground reference for the regulator; input and output capacitor grounds should return to this pin with short, wide traces. |
| 3 | VOUT | power_out | Regulated 3.3V output of the regulator, up to 500mA peak, stable with 1uF to 22uF output capacitance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DSTECH |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VIN | 2.5 | 36 | V | 5 | ||
| DC Output Voltage Accuracy | -1 | 1 | % | ILOAD =0.1mA | 5 | ||
| Load Regulation | ΔLOAD | 0.5 | % | 10mA≤ ILOAD ≤ 0.1A | 5 | ||
| Output Current Limit | ILIM | 501 | 700 | mA | VOUT =0V | 5 | |
| Dropout Voltage (VOUT = 3.3V) | VDROP_3.3V | 0.38 | V | ILOAD =100mA, VOUT = 3.3V | 5 | ||
| Line Regulation | ΔLINE | 0.8 | % | ILOAD =1mA, 10V ≤ VIN ≤ 20V | 5 | ||
| Absolute Maximum VIN to GND | VIN | -0.3 | 40 | V | 4 | ||
| Absolute Maximum VOUT to GND | VOUT | -0.3 | 14 | V | 4 | ||
| Absolute Maximum VOUT to VIN | VOUT-VIN | -40 | 0.3 | V | 4 | ||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec. | 4 | |||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TSTG | -40 | 150 | °C | 4 | ||
| ESD HBM | 2 | kV | HBM | 4 | |||
| ESD MM | 200 | V | MM | 4 | |||
| Input Voltage (recommended) | VIN | 2.5 | 36 | V | 4 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 4 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Ground Current | IQ | 2 | μA | ILOAD = 0mA, VOUT ≤ 5V | 5 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | VOUT =3.3V, ILOAD =30mA, VIN = 12V, f = 1KHz | 5 | ||
| Thermal Shutdown Temperature | TSD | 160 | °C | ILOAD =10mA | 5 | ||
| Thermal Shutdown Hysteresis | ΔTSD | 30 | °C | 5 | |||
| Thermal Resistance Junction-to-Ambient, SOT-89-3 | θJA | 120 | °C/W | TA=25°C, DSTECH EVB board (Note 2) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | must be back to the DS8404 ground pin using as wide and as short of a copper trace as is practical. | 9 |
CAD (KiCad official)
- Symbol:
DS8404-33A3 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
ds8404-33a3-etched.step/ds8404-33a3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds8404-33a3.step/ds8404-33a3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DSTECH datasheet (13 pp, sha256
058f87e3e35bc48d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).