3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHMCP6022T-I
HXY MOSFET · Operational Amplifier · SOP-8
HMCP6022T-I from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier A output. |
| 2 | -INA | input | Inverting input of amplifier A; voltage range is from (VS- - 0.1V) to (VS+ + 0.1V). |
| 3 | +INA | input | Non-inverting input of amplifier A; same voltage range as -IN, (VS- - 0.1V) to (VS+ + 0.1V). |
| 4 | -VS | power_in | Negative power supply. |
| 5 | +INB | input | Non-inverting input of amplifier B; same voltage range as -IN, (VS- - 0.1V) to (VS+ + 0.1V). |
| 6 | -INB | input | Inverting input of amplifier B; voltage range is from (VS- - 0.1V) to (VS+ + 0.1V). |
| 7 | OUTB | output | Amplifier B output. |
| 8 | +VS | power_in | Positive power supply; absolute maximum VS+ to VS- is 8.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VS+ to VS- | VS | 8 | V | 2 | |||
| Signal input terminals voltage (relative to VS- and VS+) | VI | -0.5 | 0.5 | V | Printed as VS-, 0.5 V to VS+ + 0.5 V; min referenced to VS-, max referenced to VS+ | 2 | |
| Signal input terminals current | II | -10 | 10 | mA | Printed as ±10 mA | 2 | |
| Storage temperature range | Tstg | -65 | 150 | ℃ | 2 | ||
| Junction temperature | TJ | 150 | ℃ | 2 | |||
| Lead temperature range (soldering) | 260 | ℃ | Soldering 10 sec | 2 | |||
| ESD human body model (HBM) | -5000 | 5000 | V | Per MIL-STD-883J Method 3015.9; printed ±5 000 | 2 | ||
| ESD charged device model (CDM) | -2000 | 2000 | V | Per ESDA/JEDEC JS-002-2014; printed ±2 000 | 2 | ||
| ESD machine model (MM) | -250 | 250 | V | Per JESD22-A115C; printed ±250 | 2 | ||
| Operating supply voltage | VS | 1.8 | 5.5 | V | TA = 0 to +70 ℃ | 4 | |
| Operating supply voltage | VS | 2 | 5.5 | V | TA = −40 to +125 ℃ | 4 | |
| Operating temperature range | TA | -40 | 125 | ℃ | 4 | ||
| Input offset voltage | VOS | -0.35 | 0.1 | 0.35 | mV | HMCP6021,6022 variant; table note: VS = 5.0 V, TA = +25℃, VCM = VS/2, RL = 10 kΩ to VS/2 | 3 |
| Offset voltage drift | VOS TC | 1 | 2.3 | μV/℃ | TA = −40 to +125 ℃ | 3 | |
| Power supply rejection ratio | PSRR | 95 | 110 | dB | VS = 2.0 to 5.5 V, VCM < VS+ − 2V | 3 | |
| Power supply rejection ratio | PSRR | 82 | dB | TA = −40 to +125 ℃ | 3 | ||
| Input bias current | IB | 150 | pA | TA = +85 ℃ | 3 | ||
| Input bias current | IB | 500 | pA | TA = +125 ℃ | 3 | ||
| Common-mode voltage range | VCM | -0.1 | 0.1 | V | Printed as VS- − 0.1 V to VS+ + 0.1 V; min referenced to VS-, max referenced to VS+ | 3 | |
| Common-mode rejection ratio | CMRR | 80 | 96 | dB | VS = 5.5 V, VCM = −0.1 to 5.6 V | 3 | |
| Common-mode rejection ratio | CMRR | 75 | dB | VCM = 0 to 5.3 V, TA = −40 to +125 ℃ | 3 | ||
| Common-mode rejection ratio | CMRR | 76 | 90 | dB | VS = 2.0 V, VCM = −0.1 to 2.1 V | 3 | |
| Common-mode rejection ratio | CMRR | 70 | dB | VCM = 0 to 1.8 V, TA = −40 to +125 ℃ | 3 | ||
| Open-loop voltage gain | VOL | 97 | 105 | dB | RL = 10 kΩ, VO = 0.05 to 3.5 V | 3 | |
| Open-loop voltage gain | VOL | 87 | dB | RL = 10 kΩ, TA = −40 to +125 ℃ | 3 | ||
| Open-loop voltage gain | VOL | 85 | 90 | dB | RL = 600 Ω, VO = 0.15 to 3.5 V | 3 | |
| Open-loop voltage gain | VOL | 75 | dB | RL = 600 Ω, TA = −40 to +125 ℃ | 3 | ||
| High output voltage swing (VS+ minus) | VOH | -12 | -8 | mV | RL = 10 kΩ; printed VS+ − 12 mV min, VS+ − 8 mV typ | 4 | |
| High output voltage swing (VS+ minus) | VOH | -180 | -125 | mV | RL = 600 Ω; printed VS+ − 180 mV min, VS+ − 125 mV typ | 4 | |
| Low output voltage swing (VS- plus) | VOL | 6 | 9 | mV | RL = 10 kΩ; printed VS- + 6 mV typ, VS- + 9 mV max | 4 | |
| Low output voltage swing (VS- plus) | VOL | 90 | 130 | mV | RL = 600 Ω; printed VS- + 90 mV typ, VS- + 130 mV max | 4 | |
| Short-circuit current | ISC | -75 | 75 | mA | Printed as ±75 mA | 4 | |
| Quiescent current per amplifier | IQ | 625 | 760 | μA | VS = 2.0 V | 4 | |
| Quiescent current per amplifier | IQ | 750 | 930 | μA | VS = 5.0 V | 4 | |
| Package thermal resistance, junction to ambient (SOP-8) | θJA | 125 | ℃/W | SOP-8 package | 4 |
CAD (KiCad official)
- Symbol:
HMCP6022T-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hmcp6022t-i-sn-etched.step/hmcp6022t-i-sn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hmcp6022t-i-sn.step/hmcp6022t-i-sn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (17 pp, sha256
8e787d62a3b99eb1, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).