component

HG24C04MM

Public Unreviewed

by Ray

HGSEMI EEPROM, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentmemoryhg24c04mm
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

HG24C04MM

HGSEMI · EEPROM · MSOP-8

HG24C04MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 unconnected Not connected on HG24C04. The device only uses A1 and A2 for hardwired addressing; A0 is a no-connect and can be tied to ground.
2 A1 input Device address input. Hardwired to VCC or GND to set the least-significant device address bit; must match the corresponding bit in the I2C device address word to enable the chip.
3 A2 input Device address input. Hardwired to VCC or GND. Together with A1, allows up to four HG24C04 devices to share a single I2C bus.
4 GND power_in Ground reference for the device.
5 SDA bidirectional Bidirectional serial data line for the two-wire (I2C) interface. Open-drain output; requires an external pull-up resistor to VCC. May be wire-ORed with any number of other open-drain or open-collector devices.
6 SCL input Serial clock input. Positive edge clocks data into the EEPROM; negative edge clocks data out. Schmitt-triggered filtered input for noise suppression. Supports 1 MHz at 5V and 400 kHz at 1.8/2.5/2.7V.
7 WP input Write Protect input. Tie to GND for normal read/write operation; tie to VCC to hardware-write-protect the full 4K array.
8 VCC power_in Positive supply voltage, 1.7V to 5.5V. Bypass with a 0.1uF ceramic capacitor to GND close to the pin.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package MSOP-8
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • HG24C04MM/TR
  • HG24C04MMN
  • HG24C04MMM/TR
  • HG24C04MMM-4K/TR
  • HG24C04MMM5/TR
  • HG24C04MMM8/TR
  • HG24C04MMDQ3/TR
  • HG24C04MMDQ2/TR

CAD (KiCad official)

  • Symbol: HG24C04MM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (19 pp, sha256 228b5241d9f7dc0a, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF