component
TPS54561QDPRTQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-10-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS54561QDPRTQ1
Texas Instruments · DC-DC Converters · WSON-10-EP(4x4)
TPS54561QDPRTQ1 from Texas Instruments, in a WSON-10-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | The device requires a bootstrap capacitor between BOOT and SW; if the voltage on this capacitor falls below the minimum required to operate the high-side MOSFET, the gate driver switches off until the capacitor recharges. |
| 2 | VDD | power_in | Input supply pin with a 4.5-V to 60-V operating range. |
| 3 | EN | input | Enable pin with an internal pullup current source; pull below 1.2 V to disable and float to enable, and the input undervoltage lockout can be adjusted with two resistors. |
| 4 | SS/TR | input | Soft-start and tracking input; an external capacitor sets the output rise time, and a voltage applied to this pin overrides the internal reference to allow tracking and sequencing. |
| 5 | RT/CLK | input | Resistor timing and external clock input; an external resistor to ground sets the switching frequency, and when pulled above the PLL upper threshold the pin becomes a high-impedance synchronization clock input. |
| 6 | FB | input | Inverting input of the transconductance (gm) error amplifier. |
| 7 | COMP | output | Error amplifier output and input to the output switch-current comparator (PWM comparator); frequency compensation components connect to this pin. |
| 8 | GND | power_in | Ground pin; to ensure proper operation, it must be electrically connected to the copper pad under the IC on the printed circuit board. |
| 9 | SW | input | Source of the internal high-side power MOSFET and the switching node of the converter (datasheet I/O column lists this pin as I). |
| 10 | PWRGD | output | Open-drain power-good output that asserts when the output voltage is low because of thermal shutdown, dropout, overvoltage, or EN shutdown. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(4x4) |
| Category | Power Supply Chip |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS54561QDPRTQ1 - Footprint:
Package_SON:WSON-10-1EP_4x4mm_P0.8mm_EP2.6x3mm - 3D model: WSON-10-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
tps54561qdprtq1-etched.step/tps54561qdprtq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps54561qdprtq1.step/tps54561qdprtq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (54 pp, sha256
6999bc04acb346ca, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).