3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWF100SPZ 1BG D6 AT
WF · Pressure Sensors · DIP-6
WF100SPZ 1BG D6 AT from WF, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection; Table 3.1 lists pin 1 as GND, and the connection definition is the same for the SOP and DIP packages. |
| 2 | Vout+ | output | Positive bridge output signal, which carries the pressure-dependent output voltage (full-scale output 50 to 110 mV per Table 1.1 at 5 Vdc). |
| 3 | Vin+ | power_in | Positive bridge excitation supply input; the sensor is tested at 5 Vdc and the datasheet gives a supply voltage maximum of 10 Vdc. |
| 4 | NC | unconnected | No internal connection, as listed in Table 3.1 for pin 4. |
| 5 | Vout- | output | Negative bridge output signal, which is the complement of Vout+ for the differential pressure output. |
| 6 | GND | power_in | Ground connection; Table 3.1 lists pin 6 as GND, the same as pin 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WF |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 5 | 10 | Vdc | 2 | |||
| Bridge Resistance | 4.5 | 5 | 5.5 | kΩ | 2 | ||
| Offset | -15 | 0 | 15 | mV | 2 | ||
| Output @ full pressure | 50 | 80 | 110 | mV | 2 | ||
| Linearity | 0.2 | 0.5 | %FS | 2 | |||
| TCO (first row) | TCO | -0.08 | -0.03 | 0.08 | %FS/℃ | CC type | 2 |
| TCO (second row) | TCO | -0.08 | -0.04 | 0.08 | %FS/℃ | CC type | 2 |
| TCS (first row) | TCS | -0.27 | -0.22 | -0.17 | %FS/℃ | CC type | 2 |
| TCS (second row) | TCS | -0.05 | 0.02 | 0.05 | %FS/℃ | CC type | 2 |
| TCR | TCR | 1500 | 2000 | 2500 | ppm/℃ | 2 | |
| Hysteresis | 0.05 | 0.1 | %FS | 2 | |||
| Operation temperature | -40 | 125 | ℃ | 2 | |||
| Storage temperature | -50 | 150 | ℃ | 2 | |||
| Supply Current | 1 | mAdc | 2 |
CAD (KiCad official)
- Symbol:
WF100SPZ 1BG D6 AT - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
wf100spz-1bg-d6-at-etched.step/wf100spz-1bg-d6-at-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wf100spz-1bg-d6-at.step/wf100spz-1bg-d6-at.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WF datasheet (7 pp, sha256
2958db005838ec23, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).