component
M95M01-RMN6P
Public Made by Adomby adom
STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM95M01-RMN6P
STMicroelectronics · EEPROM · SO-8
M95M01-RMN6P from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select (S) input signal; when driven low, the device is selected and enters Active Power mode; when high, the device is deselected and enters Standby Power mode unless an internal Write cycle is in progress. |
| 2 | Q | output | Serial Data Output (Q) signal used to transfer data serially out of the device; data is shifted out on the falling edge of Serial Clock (C); output is high impedance when device is deselected or in Hold condition. |
| 3 | W | input | Write Protect (W) input signal; freezes the size of the memory area protected against Write instructions as defined by Block Protect (BP1, BP0) bits; must be driven high or low and remain stable during all Write instructions. |
| 4 | VSS | power_in | Ground reference (VSS) for all signals, including the VCC supply voltage; provides 0 V reference potential for all logic operations. |
| 5 | D | input | Serial Data Input (D) signal used to transfer data serially into the device (instructions, addresses, and data to be written); values are latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock (C) input signal providing timing for the serial interface; instructions, addresses, or data at Serial Data Input (D) are latched on the rising edge; data on Serial Data Output (Q) changes from the falling edge. |
| 7 | HOLD | input | Hold (HOLD) input signal used to pause any serial communications with the device without deselecting it; when driven low with Chip Select S low, Serial Data Output (Q) enters high impedance and Serial Data Input (D) and Serial Clock (C) become Don't Care. |
| 8 | VCC | power_in | Supply voltage (VCC) for the device; operating range 1.8 V to 5.5 V for M95M01-R (1.7 V to 5.5 V for M95M01-DF); must be held stable and within specified range during all operations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95M01-RMN6P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m95m01-rmn6p-etched.step/m95m01-rmn6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95m01-rmn6p.step/m95m01-rmn6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (53 pp, sha256
323ad6b5a1d5fe41, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).