3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMCS1107A3BQDRQ1
Texas Instruments · Current Sensors · SOIC-8
TMCS1107A3BQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | passive | Positive input current pin, connected internally to pin 2 through the 1.8 mΩ isolated leadframe conductor, with current flowing into IN+ treated as positive. |
| 2 | IN+ | passive | Positive input current pin, connected internally to pin 1 through the 1.8 mΩ isolated leadframe conductor, with current flowing into IN+ treated as positive. |
| 3 | IN- | passive | Negative input current pin, connected internally to pin 4 through the 1.8 mΩ isolated leadframe conductor, rated for ±420 VPK relative to GND. |
| 4 | IN- | passive | Negative input current pin, connected internally to pin 3 through the 1.8 mΩ isolated leadframe conductor, rated for ±420 VPK relative to GND. |
| 5 | GND | power_in | Ground reference for the low-voltage side; the input pin voltage ratings are specified relative to this pin. |
| 6 | NC | unconnected | No internal connection; the pin tolerates capacitive or resistive connection to GND or VS (1 MΩ input impedance for GND < VNC < VS) and is recommended to be shorted to GND if acceptable. |
| 7 | VOUT | output | Analog output voltage proportional to input current (200 mV/A for the A3B), with 0.5 × VS zero-current output, 1 nF maximum capacitive load and 90 mA short-circuit current. |
| 8 | VS | power_in | Supply voltage pin for the isolated low-voltage side, 3 V to 5.5 V operation, with a 0.1 µF low-ESR decoupling capacitor to GND placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensitivity error | -1.2 | 0.4 | 1.2 | % | 0.05V ≤ VOUT ≤ VS, 0.2V, TA = 25ºC | 8 | |
| Sensitivity error, including lifetime and environmental drift | -1.8 | 0.7 | 1.8 | % | 0.05V ≤ VOUT ≤ VS, 0.2V, TA = 25ºC | 8 | |
| Sensitivity error | -1.8 | 0.7 | 1.8 | % | 0.05V ≤ VOUT ≤ VS, 0.2V, TA = -40ºC 至 +85ºC | 8 | |
| Sensitivity error | -2.25 | 0.9 | 2.25 | % | 0.05V ≤ VOUT ≤ VS, 0.2V, TA = -40ºC 至 +125ºC | 8 | |
| Output voltage offset error | VOE | -12 | 3 | 12 | mV | TMCS1107A3B-Q1 | 8 |
| Output voltage drift | -80 | 15 | 80 | µV/℃ | TMCS1107A3B-Q1, TA = -40ºC 至 +125ºC | 9 | |
| Offset error, RTI | IOS | -60 | 15 | 60 | mA | TMCS1107A3B-Q1 | 9 |
| Offset error temperature drift, RTI | -400 | 75 | 400 | µA/°C | TMCS1107A3B-Q1, TA = -40ºC 至 +125ºC | 9 | |
| Power supply rejection ratio | PSRR | -6.5 | 1 | 6.5 | mV/V | VS = 3V 至 5.5V, TA= -40ºC 至 +125ºC | 9 |
| Sensitivity | 200 | mV/A | TMCS1107A3B-Q1 | 8 | |||
| Nonlinearity error | 0.5 | % | VOUT = 0.5V 至 VS, 0.5V | 8 | |||
| Common-mode transient immunity | CMTI | 50 | kV/µs | 9 | |||
| Common-mode rejection ratio, RTI | CMRR | 5 | uA/V | DC 到 60Hz | 9 | ||
| Safety temperature | TS | 150 | ℃ | 7 | |||
| Safety power (total) | PS | 3.4 | W | RθJA = 36.6°C/W, TJ = 150°C, TA = 25°C | 7 |
CAD (KiCad official)
- Symbol:
TMCS1107A3BQDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tmcs1107a3bqdrq1-etched.step/tmcs1107a3bqdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmcs1107a3bqdrq1.step/tmcs1107a3bqdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
d90c961aa6d4c386, retrieved 2026-10-27, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).