Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV1842

Texas Instruments · IC · VSSOP-8 (DGK)

TLV1842 from Texas Instruments, in a VSSOP-8 (DGK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OUT1 output Output pin of comparator 1, which is an open-drain output on the TLV184x family, with output voltage for open drain limited to -0.2 V to 40 V.
2 IN1- input Inverting input pin of comparator 1, with input voltage range from (V-) -0.2 V to (V+) + 0.2 V.
3 IN1+ input Noninverting input pin of comparator 1, with input voltage range from (V-) -0.2 V to (V+) + 0.2 V.
4 V- power_in Negative supply voltage, with supply defined as VS = (V+) - (V-) from 2.7 V to 40 V.
5 IN2+ input Noninverting input pin of comparator 2, with input voltage range from (V-) -0.2 V to (V+) + 0.2 V.
6 IN2- input Inverting input pin of comparator 2, with input voltage range from (V-) -0.2 V to (V+) + 0.2 V.
7 OUT2 output Output pin of comparator 2, which is an open-drain output on the TLV184x family, with output voltage for open drain limited to -0.2 V to 40 V.
8 V+ power_in Positive supply voltage, with supply defined as VS = (V+) - (V-) from 2.7 V to 40 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8 (DGK)
Category
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -2.5 0.3 2.5 mV TA = 25°C 7
Input offset voltage VOS -3 3 mV TA = -40°C to +125°C 7
Quiescent current per comparator (No Load, Output High) IQ 75 95 µA No Load, Output High, TA = 25°C 7
Quiescent current per comparator (No Load, Output High) IQ 100 µA No Load, Output High, TA = -40°C to +125°C 7
Quiescent current per comparator (No Load, Output Low) IQ 95 130 µA No Load, Output Low, TA = 25°C 7
Quiescent current per comparator (No Load, Output Low) IQ 135 µA No Load, Output Low, TA = -40°C to +125°C 7
Input bias current IB -5 5 nA TA = -40°C to +125°C 7
Voltage swing from (V-) (output low) VOL 400 mV ISINK = 4mA, TA = -40°C to +125°C 7
Open-drain output leakage current ILKG 3 70 nA VID = +0.1V, VPULLUP = (V+), TA = -40°C to +125°C 7
Short-circuit current, sinking IOL 30 mA Sinking, TA = -40°C to +125°C 7
Short-circuit current, sourcing IOH 30 mA Sourcing, TA = -40°C to +125°C 7
Input offset voltage drift dVIO/dT -1.2 1.2 µV/°C TA = -40°C to +125°C 7
Supply voltage VS 2.7 40 V VS = (V+), (V-) 6
Input voltage range from (V-) VIN -0.2 V Maximum printed as (V+) + 0.2 V 6
Output voltage for open drain VOUT -0.2 40 V Open-drain output 6
Ambient temperature TA -40 125 °C Operating free-air temperature range 6
Supply voltage VS -0.3 42 V VS = (V+), (V-) 6
Input pins voltage (IN+, IN-) VIN -0.3 V From (V-); maximum printed as (V+) + 0.3 V 6
Current into input pins (IN+, IN-) IIN -10 10 mA 6
Output (OUT) open-drain voltage VOUT -0.3 42 V Open-drain, from (V-) 6
Output short circuit current IOUT_SC -10 10 mA Continuous output short circuit 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Junction-to-ambient thermal resistance (DGK, VSSOP 8 pins) RθJA 151.5 °C/W DGK (VSSOP) 8-pin column 6
Junction-to-case (top) thermal resistance (DGK, VSSOP 8 pins) RθJC(top) 61.1 °C/W DGK (VSSOP) 8-pin column 6
Junction-to-board thermal resistance (DGK, VSSOP 8 pins) RθJB 86.1 °C/W DGK (VSSOP) 8-pin column 6
Junction-to-top characterization parameter (DGK, VSSOP 8 pins) ψJT 5 °C/W DGK (VSSOP) 8-pin column 6
Junction-to-board characterization parameter (DGK, VSSOP 8 pins) ψJB 84.8 °C/W DGK (VSSOP) 8-pin column 6

CAD (Adom-generated)

  • Symbol: TLV1842
  • Footprint: Adom_Gen:Texas_Instruments_TLV1842
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tlv1842-etched.step / tlv1842-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv1842.step / tlv1842.glb are the bare package body.

Provenance

No distributor stocks TLV1842 yet. This page was built from the datasheet.

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 3e817543b9ea8e31, retrieved 2026-11-04, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF