3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC4575-5.0WU
Microchip Tech · DC-DC Converters · TO-263-5
MIC4575-5.0WU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply voltage input: unregulated +4V to +40V supply voltage (operating rating +24V). |
| 2 | SW | output | Switch output: emitter of NPN output switch, connect to external storage inductor and Schottky diode. |
| 3 | GND | power_in | Ground (the TAB is also ground). |
| 4 | FB | input | Feedback input: output voltage feedback to regulator, connect to the supply output for fixed versions. |
| 5 | SHDN | input | Shutdown input: logic low enables regulator, logic high (> 2.4V) shuts down regulator. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.9 | 5 | 5.1 | V | VIN = 12V; ILOAD = 200 mA; TA = +25°C | 4 |
| Output Voltage (line/load) | VOUT | 4.8 | 5 | 5.2 | V | 8V ≤ VIN ≤ 24V, 0.1A ≤ ILOAD ≤ 0.5A | 4 |
| Output Voltage (line/load, over temperature) | VOUT | 4.75 | 5.25 | V | 8V ≤ VIN ≤ 24V, 0.1A ≤ ILOAD ≤ 0.5A, -40°C ≤ TA ≤ +85°C | 4 | |
| Oscillator Frequency | fO | 180 | 200 | 220 | kHz | 4 | |
| Saturation Voltage | VSAT | 1 | 1.3 | V | IOUT = 1A | 4 | |
| Saturation Voltage (over temperature) | VSAT | 1.5 | V | IOUT = 1A | 4 | ||
| Maximum Duty Cycle (On) | DMAX | 90 | 95 | % | FB connected to 0V | 4 | |
| Current Limit | ILIM | 1.7 | 2.2 | 3 | A | Peak Current, tON ≤ 3 µs | 4 |
| Current Limit (over temperature) | ILIM | 1.3 | 3.2 | A | Peak Current, tON ≤ 3 µs | 4 | |
| Output Leakage Current | IOUT | 0 | 2 | mA | Output = 0V, VIN = 24V, FB connected to 0V | 4 | |
| Output Leakage Current | IOUT | 7.5 | 35 | mA | Output = -1V, VIN = 24V, FB connected to 0V | 4 | |
| Quiescent Current | IQ | 5 | 10 | mA | 4 | ||
| Standby Quiescent Current | IQ(STBY) | 50 | 200 | µA | SHDN = 5V (regulator off) | 4 | |
| SHDN Input Logic Level (regulator off) | 2.2 | 1.4 | V | VOUT = 0V (regulator off) | 4 | ||
| SHDN Input Logic Level (regulator off, over temperature) | 2.4 | V | VOUT = 0V (regulator off) | 4 | |||
| SHDN Input Logic Level (regulator on) | 1.2 | 1 | V | VOUT = 3.3V or 5V (regulator on) | 4 | ||
| SHDN Input Logic Level (regulator on, over temperature) | 0.8 | V | VOUT = 3.3V or 5V (regulator on) | 4 | |||
| SHDN Input Current | 4 | 30 | µA | SHDN = 5V (regulator off) | 4 | ||
| SHDN Input Current | -10 | 0.01 | 10 | µA | SHDN = 0V (regulator on) | 4 | |
| Efficiency | 77 | % | ILOAD = 1A | 4 | |||
| Supply Voltage (absolute maximum) | VIN | 40 | V | Note 1 | 3 | ||
| Shutdown Voltage | VSHDN | -0.3 | 36 | V | 3 | ||
| Output Switch Voltage | VSW | -1 | V | Steady State | 3 | ||
| Storage Temperature | TS | -65 | 150 | °C | 3 | ||
| Supply Voltage (operating) | VIN | 24 | V | Operating Ratings | 3 | ||
| Junction Temperature | TJ | 150 | °C | Operating Ratings | 3 | ||
| Thermal Resistance Junction to Ambient | θJA | 65 | °C/W | TO-220, TO-263 | 5 | ||
| Thermal Resistance Junction to Case | θJC | 2 | °C/W | TO-220, TO-263 | 5 |
CAD (KiCad official)
- Symbol:
MIC4575-5.0WU - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic4575-5-0wu-etched.step/mic4575-5-0wu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4575-5-0wu.step/mic4575-5-0wu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (20 pp, sha256
272b90118acd9309, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).