3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL7705B
XINLUDA · Analog To Digital Converters (ADCs) · SOP-16-300mil
XL7705B from XINLUDA, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Read/write serial clock input for the three-wire interface, specified as a Schmitt-trigger input. |
| 2 | XI | input | Clock input for a crystal or external clock, with a master clock range of 400 to 2500 kHz and input levels of 0.8 V low / 3.5 V high at VDD=5 V (0.4 V / 2.5 V at VDD=3 V). |
| 3 | XO | output | Clock output of the crystal oscillator; the application circuit uses crystal load capacitors C1 and C2 generally in the range of 30 pF to 50 pF. |
| 4 | CSN | input | Active-low chip select; registers can only be read or written while CSN is pulled low, and CSN should be pulled high after the access. |
| 5 | RESET | input | Active-low reset that resets all logic, digital filters and modulators and returns on-chip registers to default, with a minimum pulse width of 100 ns. |
| 6 | AIN2P | input | Differential analogue positive input for channel 2; the absolute/common-mode range is -0.03 V to VDD+0.03 V with BUFEN=0, or 0.05 V to VDD-1.5 V with BUFEN=1. |
| 7 | AIN1P | input | Differential analogue positive input for channel 1; the absolute/common-mode range is -0.03 V to VDD+0.03 V with BUFEN=0, or 0.05 V to VDD-1.5 V with BUFEN=1. |
| 8 | AIN1N | input | Differential analogue negative input for channel 1; the absolute/common-mode range is -0.03 V to VDD+0.03 V with BUFEN=0, or 0.05 V to VDD-1.5 V with BUFEN=1. |
| 9 | REFINP | input | Positive reference voltage input, which must be greater than REFINN; the reference is 2.5 V at 5 V supply or 1.225 V at 3 V supply, and the reference absolute/common-mode range is 0 to VDD. |
| 10 | REFINN | input | Negative reference voltage input, which must be less than REFINP; the reference is 2.5 V at 5 V supply or 1.225 V at 3 V supply, and the reference absolute/common-mode range is 0 to VDD. |
| 11 | AIN2N | input | Differential analogue negative input for channel 2; the absolute/common-mode range is -0.03 V to VDD+0.03 V with BUFEN=0, or 0.05 V to VDD-1.5 V with BUFEN=1. |
| 12 | OKL | output | Conversion-complete flag: low means the ADC result register is updated and can be read, while high means conversion or update is in progress and data cannot be read. |
| 13 | DOUT | output | Serial data output that shifts data out on the falling edge of SCLK, most significant bit first. |
| 14 | DIN | input | Serial data input that is written on the rising edge of SCLK, most significant bit first. |
| 15 | VDD | power_in | Power supply for 3 V or 5 V operation (±5%); the absolute maximum logic supply voltage is 7 V with a -0.3 V lower limit. |
| 16 | GND | power_in | Ground pin, the device ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-16-300mil |
| Category | Data Converters |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic Supply Voltage | VDD | -0.3 | 7 | V | 3 | ||
| Analogue input voltage | Vin | -0.3 | V | 3 | |||
| Digital output voltage | Vout | -0.3 | V | 3 | |||
| Operating Temperature Range | Topr | -40 | 85 | ℃ | 3 | ||
| Storage temperature range | Tstg | -45 | 125 | ℃ | 3 | ||
| Junction temperature | Tj | 125 | ℃ | 3 | |||
| Electrostatic discharge (ESD) Human-body model (HBM) | 2000 | V | Human-body model (HBM) | 3 | |||
| Operating voltage tolerance | VDD | -5 | 5 | % | 3V or 5V operating voltage | 1 | |
| Maximum power consumption | 1 | mW | At 3V | 1 | |||
| Integral nonlinearity | 0 | 0.01 | %of FSR | 3 | |||
| Bipolar negative full scale error | 0 | 0.01 | %of FSR/℃ | 3 | |||
| REF IN Absolute/Common Mode Voltage | 0 | V | 3 | ||||
| AIN Absolute/Common Mode Voltage | -0.03 | V | BUFEN=0 | 3 | |||
| AIN Absolute/Common Mode Voltage | 0.05 | V | BUFEN=1 | 3 | |||
| AIN Differential voltage | 0 | V | Unipolar input | 3 | |||
| REFINP, REFINN Difference | 1 | 1.75 | V | VDD=3V,Vref=1.225V | 3 | ||
| REFINP, REFINN Difference | 1 | 3.5 | V | VDD=5V,Vref=2.5V | 3 | ||
| VIL | VIL | 0.8 | V | VDD=5V | 4 | ||
| VIL | VIL | 0.4 | V | VDD=3V | 4 | ||
| VIH | VIH | 2 | V | 4 | |||
| Schmitt trigger input (SCLK) VT+ | VT+ | 1.4 | 3 | V | VDD=5V | 4 | |
| Schmitt trigger input (SCLK) VT_ | VT_ | 0.8 | 1.4 | V | VDD=5V | 4 | |
| Schmitt trigger input (SCLK) VT+, VT_ | VT+, VT_ | 0.4 | 0.8 | V | VDD=5V | 4 | |
| Schmitt trigger input (SCLK) VT+ | VT+ | 1 | 2.5 | V | VDD=3V | 4 | |
| Schmitt trigger input (SCLK) VT_ | VT_ | 0.4 | 1.1 | V | VDD=3V | 4 | |
| Schmitt trigger input (SCLK) VT+, VT_ | VT+, VT_ | 0.375 | 0.8 | V | VDD=3V | 4 | |
| XI Input Low Level | 0.8 | V | VDD=5V | 4 | |||
| XI Input High Level | 3.5 | V | VDD=5V | 4 | |||
| XI Input Low Level | 0.4 | V | VDD=3V | 4 | |||
| XI Input High Level | 2.5 | V | VDD=3V | 4 | |||
| Power-down mode current | 16 | uA | VDD=5V, XI=0V / VDD | 4 | |||
| Power-down mode current | 8 | uA | VDD=3V, XI=0V / VDD | 4 | |||
| Master Clock Frequency | fCLKIN | 400 | 2500 | kHz | 5 | ||
| Slck↓→DIN Effective acquisition interval | tdo | 0 | 80 | ns | VDD=5V | 5 | |
| Slck↓→DIN Effective acquisition interval | tdo | 0 | 100 | ns | VDD=3V | 5 | |
| SCLK↑ Post-bus withdrawal time | tsout | 10 | 60 | ns | VDD=5V | 5 | |
| AIN Input Current | 1 | nA | 3 | ||||
| AIN Acquisition Capacitance | 10 | pF | 3 | ||||
| Resolution | 16 | Bits | Guaranteed filter trap <60hz | 3 | |||
| Supply Current | 0.32 | mA | 3V supply; BUFEN=0; fCLKIN=1 MHz; Gain 1-128; XI and OSCDIS=1 | 4 | |||
| Supply Current | 0.6 | mA | 3V supply; BUFEN=1; fCLKIN=1 MHz; Gain 1-128; XI and OSCDIS=1 | 4 | |||
| Supply Current | 0.4 | mA | 3V supply; BUFEN=0; fCLKIN=2.4576 MHz; Gain 1-4; XI and OSCDIS=1 | 4 | |||
| Supply Current | 0.7 | mA | 3V supply; BUFEN=1; fCLKIN=2.4576 MHz; Gain 1-4; XI and OSCDIS=1 | 4 | |||
| Supply Current | 1.1 | mA | 3V supply; BUFEN=1; fCLKIN=2.4576 MHz; Gain 8-128; XI and OSCDIS=1 | 4 | |||
| Supply Current | 0.45 | mA | 5V supply; BUFEN=0; fCLKIN=1 MHz; Gain 1-128; XI and OSCDIS=1 | 4 | |||
| Supply Current | 0.85 | mA | 5V supply; BUFEN=0; fCLKIN=2.4576 MHz; Gain 8-128; XI and OSCDIS=1 | 4 | |||
| Supply Current | 0.9 | mA | 5V supply; BUFEN=1; fCLKIN=2.4576 MHz; Gain 1-4; XI and OSCDIS=1 | 4 | |||
| Supply Current | 1.3 | mA | 5V supply; BUFEN=1; fCLKIN=2.4576 MHz; Gain 8-128; XI and OSCDIS=1 | 4 | |||
| RESET Pulse width | tR | 100 | ns | 5 | |||
| CSN↓→SCLK First rising edge | Tcsn1 | 120 | ns | 5 | |||
| DIN→SCLK↑ Acquisition time | tds | 30 | ns | 5 | |||
| DIN→SCLK↑ Holding time | tdh | 20 | ns | 5 | |||
| Clock Pulse width high (low) level | tspw | 100 | ns | 5 | |||
| SCLK↑ Post-bus withdrawal time | tsout | 100 | ns | VDD=3V | 5 |
CAD (KiCad official)
- Symbol:
XL7705B - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
xl7705b-etched.step/xl7705b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl7705b.step/xl7705b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (12 pp, sha256
91725263468fc1bc, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).