component
RT9193-15GB
Public Made by Adomby adom
Richtek Tech Linear Voltage Regulators (LDO), SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRT9193-15GB
Richtek Tech · Linear Voltage Regulators (LDO) · SOT-23-5
RT9193-15GB from Richtek Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage, operating range 2.5V to 5.5V (6V absolute maximum). |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Active-high chip enable, high impedance input; needs a 100k pull-down to GND if the control signal floats, logic high above 1.2V and shutdown below 0.4V. |
| 4 | BP | passive | Reference noise bypass pin that may be left floating; connect a 22nF capacitor to GND for lowest noise. |
| 5 | VOUT | power_out | Regulated output voltage (1.5V for the -15 option), up to 300mA, stable with a 1µF or larger ceramic output capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | 2 | % | IOUT = 1mA | 3 | |
| Current Limit | ILIM | 360 | 400 | mA | RLOAD = 1Ω | 3 | |
| Quiescent Current | IQ | 90 | 130 | µA | VEN ≥ 1.2V, IOUT = 0mA | 3 | |
| Dropout Voltage | VDROP | 170 | 200 | mV | IOUT = 200mA, VOUT > 2.8V | 3 | |
| Dropout Voltage | VDROP | 220 | 300 | mV | IOUT = 300mA, VOUT > 2.8V | 3 | |
| Line Regulation | VLINE | 0.3 | % | VIN = (VOUT + 1V) to 5.5V, IOUT = 1mA | 3 | ||
| Load Regulation | VLOAD | 0.6 | % | 1mA ≤ IOUT ≤ 300mA | 3 | ||
| Standby Current | ISTBY | 0.01 | 1 | µA | VEN = GND, Shutdown | 3 | |
| EN Input Bias Current | IIBSD | 0 | 100 | nA | VEN = GND or VIN | 4 | |
| EN Threshold Logic-Low | VIL | 0.4 | V | VIN = 3V to 5.5V, Shutdown | 4 | ||
| EN Threshold Logic-High | VIH | 1.2 | V | VIN = 3V to 5.5V, Start-Up | 4 | ||
| Output Noise Voltage | eNO | 100 | µVRMS | 10Hz to 100kHz, IOUT = 200mA, COUT = 1µF | 4 | ||
| PSRR | PSRR | 70 | dB | f = 100Hz, COUT = 1µF, IOUT = 10mA | 4 | ||
| PSRR | PSRR | 50 | dB | f = 10kHz, COUT = 1µF, IOUT = 10mA | 4 | ||
| Thermal Shutdown Temperature | TSD | 165 | °C | 4 | |||
| Thermal Shutdown Hysteresis | TSD | 30 | °C | 4 | |||
| Supply Input Voltage | VIN | 6 | V | 3 | |||
| Power Dissipation | PD | 400 | mW | TA = 25°C, SOT-23-5 | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| ESD Susceptibility HBM | 2 | kV | Human Body Model | 3 | |||
| ESD Susceptibility MM | 200 | V | Machine Model | 3 | |||
| Supply Input Voltage | VIN | 2.5 | 5.5 | V | 3 | ||
| EN Input Voltage | VEN | 0 | 5.5 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Thermal Resistance Junction to Ambient | θJA | 250 | °C/W | SOT-23-5, JEDEC 51-3 single-layer board | 3 | ||
| Thermal Resistance Junction to Case | θJC | 25 | °C/W | SOT-23-5 | 3 |
CAD (KiCad official)
- Symbol:
RT9193-15GB - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rt9193-15gb-etched.step/rt9193-15gb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt9193-15gb.step/rt9193-15gb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (14 pp, sha256
685fa6a4b9e767f1, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).