3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2904LVIDR
Texas Instruments · Operational Amplifier · SOIC-8
LM2904LVIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of channel 1; the datasheet specifies a continuous output short-circuit rating, with one amplifier per package shorted to ground in the test condition. |
| 2 | IN1- | input | Inverting input of channel 1; input pins are diode-clamped to the supply rails and input signals beyond 0.5 V outside the rails must be current limited to 10 mA or less. |
| 3 | IN1+ | input | Noninverting input of channel 1; the input-pin voltage range is (V-) - 0.1 V to (V+) - 1 V. |
| 4 | V- | power_in | Negative (low) supply or ground for single-supply operation; the supply voltage (V+) - (V-) is specified from 2.7 V to 5.5 V. |
| 5 | IN2+ | input | Noninverting input of channel 2; the input-pin voltage range is (V-) - 0.1 V to (V+) - 1 V. |
| 6 | IN2- | input | Inverting input of channel 2; input pins are diode-clamped to the supply rails and input signals beyond 0.5 V outside the rails must be current limited to 10 mA or less. |
| 7 | OUT2 | output | Output of channel 2; the datasheet specifies a continuous output short-circuit rating, with one amplifier per package shorted to ground in the test condition. |
| 8 | V+ | power_in | Positive (high) supply; the supply voltage (V+) - (V-) is specified from 2.7 V to 5.5 V, with an absolute maximum of 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage ((V+), (V-)) | 0 | 6 | V | 5 | |||
| Signal input pins current | -10 | 10 | mA | 5 | |||
| Operating ambient temperature | TA | -55 | 125 | °C | 5 | ||
| Operating junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage [(V+), (V-)] | VS | 2.7 | 5.5 | V | 5 | ||
| Specified temperature | TA | -40 | 125 | °C | 5 | ||
| Input offset voltage | VOS | -3 | 1 | 3 | mV | VS = 5 V | 6 |
| Input offset voltage over temperature | -5 | 5 | mV | VS = 5 V, TA = -40°C to 125°C | 6 | ||
| Power-supply rejection ratio | PSRR | 80 | 100 | dB | VS = 2.7 V to 5.5 V, VCM = (V-) | 6 | |
| Common-mode rejection ratio (2.7 V) | CMRR | 84 | dB | VS = 2.7 V, (V-), 0.1 V < VCM < (V+), 1 V, TA = -40°C to 125°C | 6 | ||
| Common-mode rejection ratio (5.5 V) | CMRR | 63 | 92 | dB | VS = 5.5 V, (V-), 0.1 V < VCM < (V+), 1 V, TA = -40°C to 125°C | 6 | |
| Open-loop voltage gain (2.7 V) | AOL | 110 | dB | VS = 2.7 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ | 6 | ||
| Open-loop voltage gain (5.5 V) | AOL | 125 | dB | VS = 5.5 V, (V-) + 0.15 V < VO < (V+), 0.15 V, RL = 2 kΩ | 6 | ||
| Voltage output swing from positive supply | VOH | 1 | V | RL ≥ 2 kΩ, TA = -40°C to 125°C | 6 | ||
| Voltage output swing from negative supply | VOL | 40 | 75 | mV | RL ≤ 10 kΩ, TA = -40°C to 125°C | 6 | |
| Specified voltage range | VS | 2.7 | 5.5 | V | 7 | ||
| Quiescent current per amplifier | IQ | 90 | 150 | µA | IO = 0 mA, VS = 5.5 V | 7 | |
| Quiescent current per amplifier over temperature | IQ | 160 | µA | IO = 0 mA, VS = 5.5 V, TA = -40°C to 125°C | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 207.9 | °C/W | D (SOIC) package, 8 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 92.8 | °C/W | D (SOIC) package, 8 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 129.7 | °C/W | D (SOIC) package, 8 pins | 5 |
CAD (KiCad official)
- Symbol:
LM2904LVIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm2904lvidr-etched.step/lm2904lvidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2904lvidr.step/lm2904lvidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
ddf109089a0a713c, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).