3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSG-8018CE 16.000000MHz TJHSA
Seiko Epson · Programmable Oscillators · SMD3225-4P
SG-8018CE 16.000000MHz TJHSA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | Standby control for the standby-variant part: a High level gives the specified frequency output on OUT, while a Low level (ST¯¯ is active low) forces OUT low with a weak pull-down and puts the device into standby, reducing supply current to the I_std level. |
| 2 | GND | power_in | Ground reference for the device; a 0.1 μF capacitor between VCC and GND should be placed on the device side of the PCB, as close to the device as possible, with short wiring for optimum jitter performance. |
| 3 | OUT | output | CMOS clock output at the specified frequency when enabled, with a maximum load of 15 pF (L_CMOS) and rise/fall time of 3.0 ns max for fO > 40 MHz in the default mode. |
| 4 | VCC | power_in | Power supply input; the rated supply range is 1.62 V to 3.63 V, with the part-specific range selected by the ordering code. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
CAD (KiCad official)
- Symbol:
SG-8018CE 16.000000MHz TJHSA - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sg-8018ce-16-000000mhz-tjhsa-etched.step/sg-8018ce-16-000000mhz-tjhsa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sg-8018ce-16-000000mhz-tjhsa.step/sg-8018ce-16-000000mhz-tjhsa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (8 pp, sha256
e92c1ef054dafe7e, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).