Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430G2210IDR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · SOIC-8

MSP430G2210IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Digital supply voltage, with the device operating range stated as 1.8 V to 3.6 V.
2 P1.2/TA0.1/CA2 bidirectional General-purpose digital I/O pin, also Timer_A capture CCI1A input and compare Out1 output, and Comparator_A+ CA2 input.
3 P1.5/TA0.0/CA5 bidirectional General-purpose digital I/O pin, also Timer_A compare Out0 output, and Comparator_A+ CA5 input.
4 P1.6/TA0.1/CA6 bidirectional General-purpose digital I/O pin, also Timer_A compare Out1 output, and Comparator_A+ CA6 input.
5 P1.7/CAOUT/CA7 bidirectional General-purpose digital I/O pin, also Comparator_A+ output CAOUT, and Comparator_A+ CA7 input.
6 RST/NMI/SBWTDIO input Reset input, which can also be configured as a nonmaskable interrupt input or as the Spy-Bi-Wire test data input/output during programming and test.
7 TEST/SBWTCK input Selects test mode for JTAG pins on Port 1, with the device protection fuse connected to TEST, and serves as Spy-Bi-Wire test clock input during programming and test.
8 DVSS power_in Digital ground reference.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VCC to VSS VCC -0.3 4.1 V 14
Voltage applied to any pin -0.3 V Referenced to VSS; max printed as VCC + 0.3 V 14
Diode current at any device terminal -2 2 mA 14
Storage temperature (unprogrammed device) Tstg -55 150 °C Unprogrammed device 14
Storage temperature (programmed device) Tstg -40 150 °C Programmed device 14
Supply voltage during program execution VCC 1.8 3.6 V During program execution 14
Supply voltage during flash program or erase VCC 2.2 3.6 V During flash program or erase 14
Operating free-air temperature TA -40 85 °C 14
Processor frequency (maximum MCLK frequency) fSYSTEM 6 MHz VCC = 1.8 V, duty cycle 50% ± 10% 14
Processor frequency (maximum MCLK frequency) fSYSTEM 12 MHz VCC = 2.7 V, duty cycle 50% ± 10% 14
Processor frequency (maximum MCLK frequency) fSYSTEM 16 MHz VCC ≥ 3.3 V, duty cycle 50% ± 10% 14
Active mode (AM) current (1 MHz) IAM,1MHz 300 370 µA VCC = 3 V; fDCO = fMCLK = fSMCLK = 1 MHz, fACLK = 0 Hz, program executes in flash, CPUOFF = 0, SCG0 = 0, SCG1 = 0, OSCOFF = 0 15
Low-power mode 2 (LPM2) current ILPM2 22 29 µA TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 0, SCG1 = 1, OSCOFF = 0 16
Low-power mode 3 (LPM3) current, VLO ILPM3,VLO 0.5 0.7 µA TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 16
Low-power mode 4 (LPM4) current ILPM4 0.1 0.5 µA TA = 25°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 16
Low-power mode 4 (LPM4) current ILPM4 0.8 1.5 µA TA = 85°C, VCC = 2.2 V; CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 16
Positive-going input threshold voltage (Port P1) VIT+ 1.35 2.25 V VCC = 3 V 17
Negative-going input threshold voltage (Port P1) VIT- 0.75 1.65 V VCC = 3 V 17
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.3 1 V VCC = 3 V 17
Pullup/pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS; for pulldown: VIN = VCC 17
High-impedance leakage current (Port P1) Ilkg(Px.y) -50 50 nA VCC = 3 V 17
Port output frequency (with load) fPx.y 12 MHz VCC = 3 V, CL = 20 pF, RL = 1 kΩ 17
Clock output frequency fPort_CLK 16 MHz VCC = 3 V, CL = 20 pF 17
Supply voltage for RSELx < 14 VCC 1.8 3.6 V RSELx < 14 21
Supply voltage for RSELx = 14 VCC 2.2 3.6 V RSELx = 14 21
Supply voltage for RSELx = 15 VCC 3 3.6 V RSELx = 15 21
1-MHz tolerance overall -5 5 % Calibrated at 30°C and 3 V; I: -40°C to 85°C, 1.8 V to 3.6 V 22
8-MHz tolerance overall -5 5 % Calibrated at 30°C and 3 V; I: -40°C to 85°C, 1.8 V to 3.6 V 22
12-MHz tolerance overall -5 5 % Calibrated at 30°C and 3 V; I: -40°C to 85°C, 2.2 V to 3.6 V 22
16-MHz tolerance overall -6 6 % Calibrated at 30°C and 3 V; I: -40°C to 85°C, 3 V to 3.6 V 22
1-MHz tolerance over temperature -3 3 % Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V 22
8-MHz tolerance over temperature -3 3 % Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V 22
12-MHz tolerance over temperature -3 3 % Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V 22
16-MHz tolerance over temperature -3 3 % Calibrated at 30°C and 3 V; 0°C to 85°C, 3 V 22
1-MHz tolerance over VCC -3 3 % Calibrated at 30°C and 3 V; 25°C, 1.8 V to 3.6 V 22
8-MHz tolerance over VCC -3 3 % Calibrated at 30°C and 3 V; 25°C, 1.8 V to 3.6 V 22
12-MHz tolerance over VCC -3 3 % Calibrated at 30°C and 3 V; 25°C, 2.2 V to 3.6 V 22
16-MHz tolerance over VCC -6 3 % Calibrated at 30°C and 3 V; 25°C, 3 V to 3.6 V 22
VLO frequency fVLO 4 12 20 kHz -40°C to 85°C, VCC = 3 V 24
Common-mode input voltage V(IC) 0 V CAON = 1, VCC = 3 V; max printed as VCC-1 V 25
Offset voltage V(offset) -10 10 mV VCC = 3 V 25

CAD (KiCad official)

  • Symbol: MSP430G2210IDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: msp430g2210idr-etched.step / msp430g2210idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430g2210idr.step / msp430g2210idr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 97290837e4d73839, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF