3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16LF819-I/SO
Microchip Tech · MICROCHIP · SOIC-18-300mil
PIC16LF819-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF- | bidirectional | Bidirectional I/O pin that also serves as analog input channel 2 and the A/D reference voltage (low) input (VREF-). |
| 2 | RA3/AN3/VREF+ | bidirectional | Bidirectional I/O pin that also serves as analog input channel 3 and the A/D reference voltage (high) input (VREF+). |
| 3 | RA4/AN4/T0CKI | bidirectional | Bidirectional I/O pin with Schmitt Trigger input that also serves as analog input channel 4 and the clock input to the TMR0 timer/counter. |
| 4 | RA5/MCLR/VPP | input | Input-only pin that functions as the active-low Master Clear (Reset) input when MCLRE is set, and as the programming voltage input (VPP). |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | Bidirectional I/O pin with TTL input that serves as the external interrupt pin, using a Schmitt Trigger buffer when configured as the external interrupt. |
| 7 | RB1/SDI/SDA | bidirectional | Bidirectional I/O pin that serves as the SPI data input (SDI) or the I2C data line (SDA). |
| 8 | RB2/SDO/CCP1 | bidirectional | Bidirectional I/O pin that serves as the SPI data output (SDO) or the CCP1 capture input / compare output / PWM output, with CCP1 pin location selected by configuration bit CCPMX. |
| 9 | RB3/CCP1/PGM | bidirectional | Bidirectional I/O pin that serves as the CCP1 capture input / compare output / PWM output or, when LVP is enabled, the low-voltage ICSP programming enable pin (PGM). |
| 10 | RB4/SCK/SCL | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the SPI serial clock input/output (SCK) or the I2C serial clock input (SCL). |
| 11 | RB5/SS | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the slave select input for SPI in Slave mode. |
| 12 | RB6/T1OSO/T1CKI/PGC | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the Timer1 oscillator output, Timer1 clock input, or the in-circuit debugger and ICSP programming clock (PGC). |
| 13 | RB7/T1OSI/PGD | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the Timer1 oscillator input or the in-circuit debugger and ICSP programming data pin (PGD). |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | RA6/OSC2/CLKO | bidirectional | Bidirectional I/O pin that serves as the oscillator crystal output in crystal modes, or outputs CLKO at 1/4 the OSC1 frequency in RC mode. |
| 16 | RA7/OSC1/CLKI | bidirectional | Bidirectional I/O pin that serves as the oscillator crystal input or the external clock source input (CLKI). |
| 17 | RA0/AN0 | bidirectional | Bidirectional I/O pin that also serves as analog input channel 0. |
| 18 | RA1/AN1 | bidirectional | Bidirectional I/O pin that also serves as analog input channel 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 119 | |||
| Storage temperature | -65 | 150 | °C | 119 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | with respect to VSS | 119 | |
| Voltage on MCLR with respect to VSS | -0.3 | 14 | V | with respect to VSS (Note 2) | 119 | ||
| Voltage on any pin with respect to VSS | -0.3 | V | except VDD and MCLR; upper limit printed as (VDD + 0.3V) | 119 | |||
| Total power dissipation | Pdis | 1 | W | (Note 1) | 119 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 119 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 119 | |
| VDD Supply Voltage (PIC16LF818/819) | VDD | 2 | 5.5 | V | HS, XT, RC and LP Oscillator mode | 121 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 121 | |||
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | See Section 12.4 Power-on Reset (POR) for details | 121 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 12.4 Power-on Reset (POR) for details | 121 | ||
| Brown-out Reset Voltage (PIC16LF818/819) | VBOR | 3.65 | 4.35 | V | 121 | ||
| Operating temperature (industrial) | TA | -40 | 85 | °C | Industrial; standard operating conditions | 121 | |
| Power-Down Current IPD (PIC16LF818/819) | IPD | 0.1 | 0.4 | µA | VDD = 2.0V, -40°C | 122 | |
| Power-Down Current IPD (PIC16LF818/819) | IPD | 0.4 | 1.5 | µA | VDD = 2.0V, +85°C | 122 | |
| Power-Down Current IPD (PIC16LF818/819) | IPD | 0.3 | 0.5 | µA | VDD = 3.0V, -40°C | 122 | |
| Power-Down Current IPD (PIC16LF818/819) | IPD | 0.7 | 1.7 | µA | VDD = 3.0V, +85°C | 122 | |
| Power-Down Current IPD (all devices) | IPD | 0.6 | 1 | µA | VDD = 5.0V, -40°C | 122 | |
| Power-Down Current IPD (all devices) | IPD | 1.2 | 5 | µA | VDD = 5.0V, +85°C | 122 | |
| Supply Current IDD, LP 32 kHz (PIC16LF818/819) | IDD | 9 | 20 | µA | VDD = 2.0V, FOSC = 32 kHz (LP oscillator), -40°C | 123 | |
| Supply Current IDD, LP 32 kHz (PIC16LF818/819) | IDD | 7 | 15 | µA | VDD = 2.0V, FOSC = 32 kHz (LP oscillator), +25°C | 123 | |
| Supply Current IDD, LP (PIC16LF818/819) | IDD | 16 | 30 | µA | VDD = 3.0V, -40°C | 123 | |
| Supply Current IDD, LP (PIC16LF818/819) | IDD | 14 | 25 | µA | VDD = 3.0V, +25°C | 123 | |
| Supply Current IDD, HS 20 MHz (all devices) | IDD | 3 | 4.2 | mA | VDD = 5.0V, FOSC = 20 MHz (HS oscillator), -40°C | 125 | |
| Supply Current IDD, HS 20 MHz (all devices) | IDD | 2.5 | 4 | mA | VDD = 5.0V, FOSC = 20 MHz (HS oscillator), +25°C | 125 | |
| Supply Current IDD, RC_RUN 31.25 kHz (PIC16LF818/819) | IDD | 8 | 20 | µA | VDD = 2.0V, FOSC = 31.25 kHz (RC_RUN, internal RC), -40°C | 126 | |
| Supply Current IDD, RC_RUN 31.25 kHz (PIC16LF818/819) | IDD | 7 | 15 | µA | VDD = 2.0V, FOSC = 31.25 kHz (RC_RUN, internal RC), +25°C | 126 | |
| Supply Current IDD, RC_RUN 4 MHz (all devices) | IDD | 1.2 | 1.5 | mA | VDD = 5.0V, -40°C | 126 | |
| Supply Current IDD, RC_RUN 4 MHz (all devices) | IDD | 1.1 | 1.4 | mA | VDD = 5.0V, +25°C | 126 | |
| Input Low Voltage, I/O ports with Schmitt Trigger buffer | VIL | 0.2 | VDD | 130 | |||
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 130 | ||
| Input High Voltage, Schmitt Trigger buffer | VIH | 0.8 | VDD | For entire VDD range | 130 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 130 | ||
| Input High Voltage, OSC1 (in XT and LP mode) | VIH | 1.6 | V | OSC1 (in XT and LP mode) | 130 | ||
| Input Leakage Current, I/O ports | IIL | -1 | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at high-impedance | 130 | |
| Input Leakage Current, MCLR | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD | 130 | |
| PORTB Weak Pull-up Current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 130 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C | 131 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 131 | ||
| Capacitive loading, all I/O pins and OSC2 | CIO | 50 | pF | (in RC mode) | 131 | ||
| INTRC Accuracy @ 31 kHz (PIC16LF818/819) | 26.562 | 35.938 | kHz | -40°C to +85°C, VDD = 2.7-3.3V | 129 | ||
| External Clock Input Frequency, HS oscillator mode | FOSC | 20 | MHz | HS Oscillator mode | 133 | ||
| Program Flash Erase cycle time | TPE | 2 | 4 | ms | 131 |
CAD (KiCad official)
- Symbol:
PIC16LF819-I - Footprint:
Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm - 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16lf819-i-etched.step/pic16lf819-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf819-i.step/pic16lf819-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (176 pp, sha256
d6b9d0dc15abe474, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16LF819-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16LF819-I/P
- PIC16LF819-I/SOTSL