component
F2800157SPMR
Public Made by Adomby adom
TEXAS INSTRUMENTS Global Sourcing Parts, LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownF2800157SPMR
TEXAS INSTRUMENTS · Global Sourcing Parts · LQFP-64(10x10)
F2800157SPMR from TEXAS INSTRUMENTS, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO29 | bidirectional | General-purpose input/output 29 with digital mux functions (e.g. OUTPUTXBAR6, SCIA_TX, SPIA_STE). |
| 2 | A16/C16,GPIO28 | bidirectional | ADC-A input 16 / ADC-C input 16 shared with GPIO28 (AGPIO). |
| 3 | XRSn | bidirectional | Device reset pin; internal pullup is always active. |
| 4 | VDD | power_in | 1.2-V digital logic power pin; must be connected and not used to bias external circuits. |
| 5 | VSS | power_in | Digital ground; must be connected to board ground. |
| 6 | A6,GPIO228 | bidirectional | ADC-A input 6 shared with GPIO228 (AGPIO). |
| 7 | C6,GPIO226 | bidirectional | ADC-C input 6 shared with GPIO226 (AGPIO). |
| 8 | A3/C5,GPIO242 | bidirectional | ADC-A input 3 / ADC-C input 5 shared with GPIO242 (AGPIO). |
| 9 | A2/C9,GPIO224 | bidirectional | ADC-A input 2 / ADC-C input 9 shared with GPIO224 (AGPIO). |
| 10 | A15/C7 | input | ADC-A input 15 / ADC-C input 7 with comparator inputs; also digital input AIO233. |
| 11 | C4/A14 | input | ADC-C input 4 / ADC-A input 14 with comparator inputs; also digital input AIO239. |
| 12 | A11/C0 | input | ADC-A input 11 / ADC-C input 0 with comparator inputs; also digital input AIO237. |
| 13 | A5/C2 | input | ADC-A input 5 / ADC-C input 2 with comparator inputs; also digital input AIO244. |
| 14 | A1 | input | ADC-A input 1 with CMPSS-1 inputs; also digital input AIO232. |
| 15 | A0/C15/CMP1_DACL | input | ADC-A input 0 / ADC-C input 15 / CMPSS-1 low DAC output; also digital input AIO231. |
| 16 | VREFHI | input | ADC high reference; tie to VDDA if ADC is not used. |
| 17 | VREFLO | input | ADC low reference; tie to VSSA if unused. |
| 18 | A12/C1 | input | ADC-A input 12 / ADC-C input 1 with comparator inputs; also digital input AIO238. |
| 19 | A7/C3 | input | ADC-A input 7 / ADC-C input 3 with CMPSS-4 inputs; also digital input AIO245. |
| 20 | A8/C11 | input | ADC-A input 8 / ADC-C input 11 with comparator inputs; also digital input AIO241. |
| 21 | VSSA | power_in | Analog ground; tie to VSS if no separate analog ground is used. |
| 22 | VDDA | power_in | 3.3-V analog power pin; place a minimum 2.2-µF decoupling capacitor on each pin. |
| 23 | A4/C14 | input | ADC-A input 4 / ADC-C input 14 with comparator inputs; also digital input AIO225. |
| 24 | C8/A9,GPIO227 | bidirectional | ADC-C input 8 / ADC-A input 9 shared with GPIO227 (AGPIO). |
| 25 | A10/C10,GPIO230 | bidirectional | ADC-A input 10 / ADC-C input 10 shared with GPIO230 (AGPIO). |
| 26 | VSS | power_in | Digital ground; must be connected to board ground. |
| 27 | A17/C17,GPIO20 | bidirectional | ADC-A input 17 / ADC-C input 17 shared with GPIO20 (AGPIO). |
| 28 | A18/C18,GPIO21 | bidirectional | ADC-A input 18 / ADC-C input 18 shared with GPIO21 (AGPIO). |
| 29 | A19/C19,GPIO13 | bidirectional | ADC-A input 19 / ADC-C input 19 shared with GPIO13 (AGPIO). |
| 30 | A20/C20,GPIO12 | bidirectional | ADC-A input 20 / ADC-C input 20 shared with GPIO12 (AGPIO). |
| 31 | GPIO11 | bidirectional | General-purpose input/output 11 with digital mux functions (e.g. EPWM6_B, CANA_RX, SCIB_RX). |
| 32 | GPIO33 | bidirectional | General-purpose input/output 33 with digital mux functions. |
| 33 | GPIO16 | bidirectional | General-purpose input/output 16 with digital mux functions (e.g. SPIA_SIMO, XCLKOUT). |
| 34 | GPIO17 | bidirectional | General-purpose input/output 17 with digital mux functions (e.g. SPIA_SOMI, CANA_TX). |
| 35 | GPIO24 | bidirectional | General-purpose input/output 24 with digital mux functions (e.g. OUTPUTXBAR1, ERRORSTS). |
| 36 | TCK | input | JTAG test clock; internal pullup is always active. |
| 37 | GPIO37/TDO | bidirectional | GPIO37 defaulting to JTAG TDO; tri-state without JTAG activity, so enable internal pullup or add an external pullup. |
| 38 | TMS | input | JTAG test mode select; internal pullup is always active. |
| 39 | GPIO35/TDI | bidirectional | GPIO35 defaulting to JTAG TDI; internal pullup disabled by default, enable it or add an external pullup. |
| 40 | GPIO32 | bidirectional | General-purpose input/output 32 with digital mux functions. |
| 41 | GPIO18,X2 | bidirectional | GPIO18 or crystal oscillator output X2. |
| 42 | GPIO19,X1 | bidirectional | GPIO19 or crystal oscillator input X1 / single-ended 3.3-V clock input (also ExtR alternate). |
| 43 | VDDIO | power_in | 3.3-V digital I/O power pin; must be connected. |
| 44 | VDD | power_in | 1.2-V digital logic power pin; must be connected and not used to bias external circuits. |
| 45 | VSS | power_in | Digital ground; must be connected to board ground. |
| 46 | VREGENZ | input | Internal voltage regulator enable with internal pulldown; tie low to VSS to enable internal VREG, high to VDDIO for external supply. |
| 47 | GPIO8 | bidirectional | General-purpose input/output 8 with digital mux functions (EPWM5_A, SCIA_TX, SPIA_SIMO, I2CA_SCL). |
| 48 | GPIO4 | bidirectional | General-purpose input/output 4 with digital mux functions; located near the PMM. |
| 49 | GPIO3 | bidirectional | General-purpose input/output 3 with digital mux functions; located near the PMM. |
| 50 | GPIO2 | bidirectional | General-purpose input/output 2 with digital mux functions; located near the PMM. |
| 51 | GPIO1 | bidirectional | General-purpose input/output 1 with digital mux functions; located near the PMM. |
| 52 | GPIO0 | bidirectional | General-purpose input/output 0 with digital mux functions; located near the PMM. |
| 53 | GPIO40 | bidirectional | General-purpose input/output 40 with digital mux functions (EPWM2_B, PMBUSA_SDA, SCIB_TX). |
| 54 | GPIO23 | bidirectional | General-purpose input/output 23 with digital mux functions (EQEP1_INDEX, SCIB_RX, LINA_RX, EPWM4_B). |
| 55 | GPIO41 | bidirectional | General-purpose input/output 41 with digital mux functions (EPWM2_A, PMBUSA_SCL, SCIB_RX). |
| 56 | GPIO22 | bidirectional | General-purpose input/output 22 with digital mux functions (EQEP1_STROBE, SCIB_TX, LINA_TX, EPWM4_A). |
| 57 | GPIO7 | bidirectional | General-purpose input/output 7 with digital mux functions. |
| 58 | VSS | power_in | Digital ground; must be connected to board ground. |
| 59 | VDD | power_in | 1.2-V digital logic power pin; must be connected and not used to bias external circuits. |
| 60 | VDDIO | power_in | 3.3-V digital I/O power pin; must be connected. |
| 61 | GPIO5 | bidirectional | General-purpose input/output 5 with digital mux functions. |
| 62 | GPIO9 | bidirectional | General-purpose input/output 9 with digital mux functions (EPWM5_B, SCIB_TX, SCIA_RX, SPIA_CLK). |
| 63 | GPIO10 | bidirectional | General-purpose input/output 10 with digital mux functions (EPWM6_A, SCIB_TX, SPIA_SOMI, I2CA_SDA). |
| 64 | GPIO6 | bidirectional | General-purpose input/output 6 with digital mux functions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TEXAS INSTRUMENTS |
| Package | LQFP-64(10x10) |
| Category | Global Sourcing Parts |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage | VDD | -0.3 | 1.5 | V | with respect to VSS | 47 | |
| VDDIO supply voltage | VDDIO | -0.3 | 4.6 | V | with respect to VSS | 47 | |
| VDDA supply voltage | VDDA | -0.3 | 4.6 | V | with respect to VSSA | 47 | |
| Input voltage | VIN | -0.3 | 4.6 | V | VIN (3.3 V) | 47 | |
| Output voltage | VO | -0.3 | 4.6 | V | 47 | ||
| Input clamp current per pin | IIK | -20 | 20 | mA | VIN < VSS/VSSA, VIN > VDDIO/VDDA | 47 | |
| Input clamp current total | IIKTOTAL | -20 | 20 | mA | VIN < VSS/VSSA, VIN > VDDIO/VDDA | 47 | |
| Digital output current per pin | IOUT | -20 | 20 | mA | 47 | ||
| Operating junction temperature | TJ | -40 | 155 | °C | 47 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 47 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM, PM package | 47 | |
| ESD CDM all pins | V(ESD) | -500 | 500 | V | CDM, all pins, PM package | 47 | |
| ESD CDM corner pins | V(ESD) | -750 | 750 | V | CDM, corner pins 1, 16, 17, 32, 33, 48, 49, 64 | 47 | |
| VDDIO and VDDA supply voltage, BOR disabled | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | Internal BOR disabled | 48 |
| VDDIO and VDDA supply voltage, BOR enabled | VDDIO, VDDA | 3.3 | 3.63 | V | Internal BOR enabled | 48 | |
| Device supply voltage | VDD | 1.14 | 1.2 | 1.32 | V | 48 | |
| Junction temperature | TJ | -40 | 140 | °C | F280015xS, F280015xQ parts | 48 | |
| Free-air temperature | TA | -40 | 125 | °C | F280015xS, F280015xQ parts | 48 | |
| Low-level output voltage | VOL | 0.4 | V | IOL = IOL MAX | 59 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100 µA | 59 | ||
| High-level output impedance | ROH | 50 | 65 | 96 | Ω | VOH=VDDS-0.4V | 59 |
| Low-level output impedance | ROL | 48 | 60 | 84 | Ω | VOL=0.4V | 59 |
| High-level input voltage | VIH | 2 | V | 59 | |||
| Low-level input voltage | VIL | 0.8 | V | 59 | |||
| Weak pulldown resistance | RPULLDOWN | 22.66 | 31.49 | 61.55 | kΩ | 59 | |
| Weak pullup resistance | RPULLUP | 19.89 | 29.45 | 53.63 | kΩ | 59 | |
| Internal voltage regulator output | VVREG | 1.152 | 1.2 | 1.248 | V | 71 | |
| System clock frequency | f(SYSCLK) | 2 | 120 | MHz | 80 | ||
| Junction-to-case thermal resistance, top | RΘJC | 20.3 | °C/W | PM package | 60 | ||
| Junction-to-board thermal resistance | RΘJB | 36.4 | °C/W | PM package | 60 | ||
| Junction-to-free air thermal resistance | RΘJA | 59.8 | °C/W | PM package, High k PCB | 60 | ||
| Junction-to-package top | Psi JT | 0.9 | °C/W | PM package | 60 | ||
| Junction-to-board | Psi JB | 36 | °C/W | PM package | 60 |
CAD (KiCad official)
- Symbol:
F2800157SPMR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
f2800157spmr-etched.step/f2800157spmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f2800157spmr.step/f2800157spmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TEXAS INSTRUMENTS datasheet (252 pp, sha256
e5e9c14e326ac962, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).