component
LSP2015CAAD150
Public Made by Adomby adom
LITEON Linear Voltage Regulators (LDO), SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLSP2015CAAD150
LITEON · Linear Voltage Regulators (LDO) · SOT-23-5L
LSP2015CAAD150 from LITEON, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage input; an input capacitor in the range of 1uF to 10uF is sufficient, operating input range 2.2V to 5.5V. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Active-high enable with an internal pull-high resistor; an external logic-low source (VENL 0 to 0.4V) is needed to disable the LDO, VENH is 1.4V to VIN. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | LDO output, stable with 1.0uF or higher ceramic capacitor, up to 300mA output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LITEON |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ΔVOUT | -1.5 | 1.5 | % | VIN=VIN(min) to 5.5V, IOUT=1mA, TA=25°C | 10 | |
| Input Voltage Range | VIN | 2.2 | 5.5 | V | 10 | ||
| Quiescent Current | IQ | 50 | 70 | uA | VIN=2.5V, VOUT<=2V | 10 | |
| Shutdown Current | ISD | 1 | uA | VIN=5.5V, VEN=0V | 10 | ||
| Dropout Voltage | VDROP | 1200 | mV | IOUT=300mA, 1.0V<=VOUT<=2.0V | 10 | ||
| Current Limit | ILIMIT | 300 | 450 | mA | VOUT = VOUT(NON) X 90% | 10 | |
| Short Circuit Current | Ishort | 100 | 200 | mA | VOUT<0.4V | 10 | |
| Line Regulation | ΔVLINE | 0.1 | 0.2 | %/V | IOUT=1mA, VIN=VOUT+1V to 5.5V | 10 | |
| Load Regulation | ΔVLOAD | 0.8 | 1 | % | IOUT=1m~300mA, VIN=VOUT+1V or VIN=2.5V whichever is greater | 10 | |
| Enable Input Threshold High | VENH | 1.4 | V | max printed as VIN | 11 | ||
| Enable Input Threshold Low | VENL | 0 | 0.4 | V | 11 | ||
| Enable Pin Current | IENH | 0.1 | uA | VEN=VIN | 11 | ||
| VOUT Temperature Coefficient | TC | 30 | ppm/°C | IOUT=10mA | 11 | ||
| Ripple Rejection | PSRR | 60 | db | IOUT=10mA, f=1KHz | 11 | ||
| Thermal Shutdown | TS | 155 | °C | 11 | |||
| Thermal Shutdown Hysteresis | TSH | 30 | °C | 11 | |||
| Supply Input Voltage | VIN | 2.2 | 5.5 | V | 9 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 9 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 9 | ||
| VIN Pin Voltage | VIN | -0.3 | 6 | V | GND - 0.3 to GND + 6 | 9 | |
| Junction Temperature Range | TJ | -40 | 125 | °C | 9 | ||
| Storage Temperature Range | TSTR | -40 | 150 | °C | 9 | ||
| Lead Temperature | TLead | 260 | °C | Soldering, 10 Seconds | 9 | ||
| ESD Withstand Voltage HBM | VESD | 2000 | V | Human Body Model, Model = 2 | 9 | ||
| ESD Withstand Voltage MM | VESD | 200 | V | Machine Model, Model = B | 9 | ||
| Power Dissipation SOT23-5L | PD | 400 | mW | SOT23-5L | 9 | ||
| Thermal Resistance Junction to Ambient | θJA | 280 | °C/W | SOT23-5L | 9 |
CAD (KiCad official)
- Symbol:
LSP2015CAAD150 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
lsp2015caad150-etched.step/lsp2015caad150-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lsp2015caad150.step/lsp2015caad150.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LITEON datasheet (22 pp, sha256
0ea37c9db7ea89a0, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).