component
DRV632PW
Public Made by Adomby adom
Texas Instruments Audio Amplifiers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDRV632PW
Texas Instruments · Audio Amplifiers · TSSOP-14
DRV632PW from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +INR | input | Right-channel differential OPAMP positive input for audio signals with input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 2 | -INR | input | Right-channel differential OPAMP negative input for audio signals with input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 3 | OUTR | output | Right-channel OPAMP output providing 2 to 2.4 Vrms into a 600 Ω to 10 kΩ load with short-circuit protection at 25 mA. |
| 4 | GND | power_in | Ground reference connection. |
| 5 | Mute | input | Active-low mute control input with 60% of VDD as high-level threshold and 40% of VDD as low-level threshold; mutes both channel outputs when driven low. |
| 6 | VSS | power_in | Negative supply voltage connection generated by internal charge pump, referenced to GND at approximately -3 V with VDD = 3.3 V. |
| 7 | CN | bidirectional | Charge-pump flying capacitor negative connection requiring 1 µF low-ESR ceramic capacitor minimum to ground for proper charge pump operation. |
| 8 | CP | bidirectional | Charge-pump flying capacitor positive connection requiring 1 µF low-ESR ceramic capacitor minimum to VDD for proper charge pump operation at 200-400 kHz switching frequency. |
| 9 | VDD | power_in | Positive supply voltage input with operating range 3.0 V to 3.6 V DC and absolute maximum rating of -0.3 V to 4 V. |
| 10 | GND | power_in | Ground reference connection. |
| 11 | UVP | input | Undervoltage protection input with internal pullup and 1.25 V external detection threshold with 5 µA hysteresis current; unconnected if UVP function is unused. |
| 12 | OUTL | output | Left-channel OPAMP output providing 2 to 2.4 Vrms into a 600 Ω to 10 kΩ load with short-circuit protection at 25 mA. |
| 13 | -INL | input | Left-channel differential OPAMP negative input for audio signals with input voltage range VSS - 0.3 V to VDD + 0.3 V. |
| 14 | +INL | input | Left-channel differential OPAMP positive input for audio signals with input voltage range VSS - 0.3 V to VDD + 0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VDD to GND | VDD | -0.3 | 4 | V | 4 | ||
| Minimum load impedance, line outputs OUTL, OUTR | RL | 600 | Ω | Line outputs OUTL, OUTR | 4 | ||
| Maximum operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -40 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model (HBM) | V(ESD) | -1500 | 1500 | V | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 5 | |
| Electrostatic discharge, charged-device model (CDM) | V(ESD) | -4000 | 4000 | V | Charged-device model (CDM), per JEDEC JESD22-C101 | 5 | |
| Supply voltage | VDD | 3 | 3.3 | 3.6 | V | DC supply voltage | 5 |
| Load impedance | RL | 0.6 | 10 | kΩ | 5 | ||
| Low-level input voltage, Mute | VIL | 40 | % of VDD | Mute | 5 | ||
| High-level input voltage, Mute | VIH | 60 | % of VDD | Mute | 5 | ||
| Operating free-air temperature | TA | -40 | 25 | 85 | °C | 5 | |
| Output offset voltage | /VOS/ | 0.5 | 1 | mV | TA = 25°C; VDD = 3.3 V | 5 | |
| Low-level output voltage | VOL | -3 | V | TA = 25°C; VDD = 3.3 V | 5 | ||
| Charge pump switching frequency | fCP | 200 | 300 | 400 | kHz | TA = 25°C | 5 |
| Supply current | IDD | 5 | 14 | 25 | mA | TA = 25°C; VDD = 3.3 V, no load, Mute = VDD | 5 |
| Output voltage, outputs in phase | VO | 2 | 2.4 | Vrms | THD+N = 1%, VDD = 3.3 V, f = 1 kHz, RL = 10 kΩ | 6 | |
| Junction-to-ambient thermal resistance | RθJA | 130 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 49 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 63 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 3.6 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 62 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
DRV632PW - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
drv632pw-etched.step/drv632pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);drv632pw.step/drv632pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
de941cb4e72b0539, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).