SC92F7547P48R
Public Made by Adomby adom
SOC(Shenzhen SinOne Microelectronics) Microcontroller Units (MCUs/MPUs/SOCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownSC92F7547P48R
SOC(Shenzhen SinOne Microelectronics) · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
SC92F7547P48R from SOC(Shenzhen SinOne Microelectronics), in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.2/T0/S22 | bidirectional | GPIO P0.2; alternate functions are Timer0 external counter input T0 and LCD/LED segment output SEG22. |
| 2 | P0.3/T1/S23 | bidirectional | GPIO P0.3; alternate functions are Timer1 external counter input T1 and LCD/LED segment output SEG23. |
| 3 | P0.4/INT04/T2EX/S24 | bidirectional | GPIO P0.4; alternate functions are external interrupt input INT04, Timer2 external capture input T2EX, and LCD/LED segment output SEG24. |
| 4 | P0.5/INT05/T2/S25 | bidirectional | GPIO P0.5; alternate functions are external interrupt input INT05, Timer2 external counter input T2 (also programmable clock output T2 in mode 3), and LCD/LED segment output SEG25. |
| 5 | P0.6/INT06/S26 | bidirectional | GPIO P0.6; alternate functions are external interrupt input INT06 and LCD/LED segment output SEG26. |
| 6 | P0.7/INT07/S27 | bidirectional | GPIO P0.7; alternate functions are external interrupt input INT07 and LCD/LED segment output SEG27. |
| 7 | VSS | power_in | Ground reference pin for the device. |
| 8 | P5.0/PWM50/OSCI | bidirectional | GPIO P5.0 with PWM50 output; serves as the 32 kHz oscillator input OSCI and is not available as I/O when the external 32 kHz crystal option (ENXTL) is enabled. |
| 9 | P5.1/PWM51/OSCO | bidirectional | GPIO P5.1 with PWM51 output; serves as the 32 kHz oscillator output OSCO and is not available as I/O when the external 32 kHz crystal option (ENXTL) is enabled. |
| 10 | P5.2/PWM52/RST | bidirectional | GPIO P5.2 with PWM52 output; functions as the external reset input RST when the Code Option DISRST is set to 0, otherwise a normal I/O pin. |
| 11 | P5.3/PWM53 | bidirectional | GPIO P5.3 with PWM53 output. |
| 12 | P5.4 | bidirectional | GPIO P5.4. |
| 13 | P5.5 | bidirectional | GPIO P5.5. |
| 14 | P4.7 | bidirectional | GPIO P4.7. |
| 15 | P4.6 | bidirectional | GPIO P4.6. |
| 16 | VDD | power_in | Power supply input; operating voltage 2.4 V to 5.5 V, absolute maximum 5.5 V. |
| 17 | P4.5 | bidirectional | GPIO P4.5. |
| 18 | P4.4/CMPR | bidirectional | GPIO P4.4; alternate function is the analog comparator external reference voltage input CMPR. |
| 19 | P4.3/INT13/PWM43/CMP3/AIN15 | bidirectional | GPIO P4.3; alternate functions are external interrupt input INT13, PWM43 output, analog comparator input CMP3, and ADC input channel 15. |
| 20 | P4.2/INT12/PWM42/CMP2/AIN14 | bidirectional | GPIO P4.2; alternate functions are external interrupt input INT12, PWM42 output, analog comparator input CMP2, and ADC input channel 14. |
| 21 | P4.1/INT11/PWM41/CMP1/AIN13 | bidirectional | GPIO P4.1; alternate functions are external interrupt input INT11, PWM41 output, analog comparator input CMP1, and ADC input channel 13. |
| 22 | P4.0/INT10/PWM40/CMP0/AIN12 | bidirectional | GPIO P4.0; alternate functions are external interrupt input INT10, PWM40 output, analog comparator input CMP0, and ADC input channel 12. |
| 23 | P3.7/AIN11/C7 | bidirectional | GPIO P3.7; alternate functions are ADC input channel 11 and LCD/LED common output C7. |
| 24 | P3.6/AIN10/C6 | bidirectional | GPIO P3.6; alternate functions are ADC input channel 10 and LCD/LED common output C6. |
| 25 | P3.5/AIN9/C5 | bidirectional | GPIO P3.5; alternate functions are ADC input channel 9 and LCD/LED common output C5. |
| 26 | P3.4/AIN8/C4 | bidirectional | GPIO P3.4; alternate functions are ADC input channel 8 and LCD/LED common output C4. |
| 27 | P3.3/S0/C3 | bidirectional | GPIO P3.3; alternate functions are LCD/LED segment output SEG0 and LCD/LED common output C3. |
| 28 | P3.2/S1/C2 | bidirectional | GPIO P3.2; alternate functions are LCD/LED segment output SEG1 and LCD/LED common output C2. |
| 29 | P3.1/S2/C1 | bidirectional | GPIO P3.1; alternate functions are LCD/LED segment output SEG2 and LCD/LED common output C1. |
| 30 | P3.0/S3/C0 | bidirectional | GPIO P3.0; alternate functions are LCD/LED segment output SEG3 and LCD/LED common output C0. |
| 31 | P1.0/S4 | bidirectional | GPIO P1.0; alternate function is LCD/LED segment output SEG4. |
| 32 | P1.1/MISO/RX1/S5/tCK | bidirectional | GPIO P1.1; alternate functions are SPI master-in/slave-out MISO, UART1 receive RX1, LCD/LED segment output SEG5, and programming/emulation clock tCK. |
| 33 | P1.2/SCK/S6 | bidirectional | GPIO P1.2; alternate functions are SPI/TWI serial clock SCK and LCD/LED segment output SEG6. |
| 34 | P1.3/MOSI/SDA/TX1/S7/tDIO | bidirectional | GPIO P1.3; alternate functions are SPI master-out/slave-in MOSI, TWI data SDA, UART1 transmit TX1, LCD/LED segment output SEG7, and programming/emulation data tDIO. |
| 35 | P1.4/INT14/AIN0/S8 | bidirectional | GPIO P1.4; alternate functions are external interrupt input INT14, ADC input channel 0, and LCD/LED segment output SEG8. |
| 36 | P1.5/INT15/AIN1/S9 | bidirectional | GPIO P1.5; alternate functions are external interrupt input INT15, ADC input channel 1, and LCD/LED segment output SEG9. |
| 37 | P1.6/INT16/AIN2/S10 | bidirectional | GPIO P1.6; alternate functions are external interrupt input INT16, ADC input channel 2, and LCD/LED segment output SEG10. |
| 38 | P1.7/INT17/AIN3/S11 | bidirectional | GPIO P1.7; alternate functions are external interrupt input INT17, ADC input channel 3, and LCD/LED segment output SEG11. |
| 39 | P2.0/INT20/RX0/AIN4/S12 | bidirectional | GPIO P2.0; alternate functions are external interrupt input INT20, UART0 receive RX0, ADC input channel 4, and LCD/LED segment output SEG12. |
| 40 | P2.1/INT21/TX0/AIN5/S13 | bidirectional | GPIO P2.1; alternate functions are external interrupt input INT21, UART0 transmit TX0, ADC input channel 5, and LCD/LED segment output SEG13. |
| 41 | P2.2/INT22/AIN6/S14 | bidirectional | GPIO P2.2; alternate functions are external interrupt input INT22, ADC input channel 6, and LCD/LED segment output SEG14. |
| 42 | P2.3/INT23/AIN7/S15 | bidirectional | GPIO P2.3; alternate functions are external interrupt input INT23, ADC input channel 7, and LCD/LED segment output SEG15. |
| 43 | P2.4/S16 | bidirectional | GPIO P2.4; alternate function is LCD/LED segment output SEG16. |
| 44 | P2.5/S17 | bidirectional | GPIO P2.5; alternate function is LCD/LED segment output SEG17. |
| 45 | P2.6/S18 | bidirectional | GPIO P2.6; alternate function is LCD/LED segment output SEG18. |
| 46 | P2.7/S19 | bidirectional | GPIO P2.7; alternate function is LCD/LED segment output SEG19. |
| 47 | P0.0/S20 | bidirectional | GPIO P0.0; alternate function is LCD/LED segment output SEG20. |
| 48 | P0.1/S21 | bidirectional | GPIO P0.1; alternate function is LCD/LED segment output SEG21. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SOC(Shenzhen SinOne Microelectronics) |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage (recommended) | VDD | 2.4 | 5.5 | V | 85 | ||
| Operating ambient temperature (recommended) | TA | -40 | 85 | ℃ | 85 | ||
| DC supply voltage (absolute maximum) | VDD/VSS | -0.3 | 5.5 | V | 85 | ||
| Voltage on any pin (absolute maximum) | -0.3 | V | 85 | ||||
| Operating ambient temperature (absolute maximum) | TA | -40 | 85 | ℃ | 85 | ||
| Storage temperature (absolute maximum) | TSTG | -55 | 125 | ℃ | 85 | ||
| Operating current | Iop1 | 9.5 | 11 | mA | VDD=5V, TA=+25℃; IRC=16MHz | 85 | |
| Operating current | Iop2 | 6.5 | 8 | mA | VDD=5V, TA=+25℃; IRC=8MHz | 85 | |
| Operating current | Iop3 | 5.2 | 6.5 | mA | VDD=5V, TA=+25℃; IRC=4MHz | 85 | |
| Operating current | Iop4 | 4.3 | 5.1 | mA | VDD=5V, TA=+25℃; IRC=1.33MHz | 85 | |
| Standby current (Power Down mode) | Ipd1 | 0.7 | 1 | μA | VDD=5V, TA=+25℃; Power Down mode | 85 | |
| Standby current (IDLE mode) | IIDL1 | 7 | 8 | mA | VDD=5V, TA=+25℃; IDLE mode | 85 | |
| Low-frequency 128k RC oscillator current | ILRC | 6 | 10 | μA | VDD=5V, TA=+25℃ | 85 | |
| WDT current | IWDT | 1 | 3 | μA | VDD=5V, TA=+25℃ | 85 | |
| Input low voltage | VIL1 | -0.3 | V | VDD=5V, TA=+25℃ | 85 | ||
| Output low current | IOL1 | 27 | mA | VDD=5V, TA=+25℃; VPin=0.4V | 85 | ||
| Output low current | IOL2 | 50 | mA | VDD=5V, TA=+25℃; VPin=0.8V | 85 | ||
| Output high current P3H-P5 | IOH1 | 17 | mA | VDD=5V, TA=+25℃; VPin=4.3V | 85 | ||
| Output high current P3H-P5 | IOH2 | 8 | mA | VDD=5V, TA=+25℃; VPin=4.7V | 85 | ||
| Output high current P0-P3L, IOH level 0 | IOH3 | 17 | mA | VDD=5V, TA=+25℃; VPin=4.3V, Pxyz=0 | 85 | ||
| Output high current P0-P3L, IOH level 1 | IOH3 | 13 | mA | VDD=5V, TA=+25℃; VPin=4.3V, Pxyz=1 | 85 | ||
| Output high current P0-P3L, IOH level 2 | IOH3 | 10 | mA | VDD=5V, TA=+25℃; VPin=4.3V, Pxyz=2 | 85 | ||
| Output high current P0-P3L, IOH level 3 | IOH3 | 5 | mA | VDD=5V, TA=+25℃; VPin=4.3V, Pxyz=3 | 85 | ||
| Output high current P0-P3L, IOH level 0 | IOH4 | 8 | mA | VDD=5V, TA=+25℃; VPin=4.7V, Pxyz=0 | 85 | ||
| Output high current P0-P3L, IOH level 1 | IOH4 | 6 | mA | VDD=5V, TA=+25℃; VPin=4.7V, Pxyz=1 | 86 | ||
| Output high current P0-P3L, IOH level 2 | IOH4 | 4 | mA | VDD=5V, TA=+25℃; VPin=4.7V, Pxyz=2 | 86 | ||
| Output high current P0-P3L, IOH level 3 | IOH4 | 2 | mA | VDD=5V, TA=+25℃; VPin=4.7V, Pxyz=3 | 86 | ||
| Internal internal reference 2.4V voltage output | VDD24 | 2.37 | 2.4 | 2.45 | V | TA=-40~85℃ | 85 |
| Operating current | Iop5 | 6.5 | 8 | mA | VDD=3.3V, TA=+25℃; IRC=16MHz | 86 | |
| Operating current | Iop6 | 5 | 6 | mA | VDD=3.3V, TA=+25℃; IRC=8MHz | 86 | |
| Operating current | Iop7 | 4 | 5 | mA | VDD=3.3V, TA=+25℃; IRC=4MHz | 86 | |
| Operating current | Iop8 | 3.3 | 4 | mA | VDD=3.3V, TA=+25℃; IRC=1.33MHz | 86 | |
| Standby current (Power Down mode) | Ipd2 | 0.6 | 1 | uA | VDD=3.3V, TA=+25℃; Power Down mode | 86 | |
| Standby current (IDLE mode) | IIDL2 | 5 | 6 | mA | VDD=3.3V, TA=+25℃; IDLE mode | 86 | |
| Output low current | IOL3 | 25 | mA | VDD=3.3V, TA=+25℃; VPin=0.4V | 86 | ||
| Output low current | IOL4 | 40 | mA | VDD=3.3V, TA=+25℃; VPin=0.8V | 86 | ||
| Output high current P3H-P5 | IOH5 | 5 | mA | VDD=3.3V, TA=+25℃; Vpin=3.0V | 86 | ||
| ADC differential nonlinearity error | DNL | -1 | 1 | LSB | VDD=5V, VREF=5V | 87 | |
| ADC integral nonlinearity error | INL | -2 | 2 | LSB | TA=25℃ | 87 | |
| ADC offset error | EZ | 1 | LSB | TA=25℃ | 87 | ||
| ADC full-scale error | EF | 35 | LSB | TA=25℃ | 87 | ||
| ADC total absolute error | EAD | 35 | LSB | TA=25℃ | 87 | ||
| ADC conversion current (ADC on, VDD=5V) | IADC1 | 1 | 2 | mA | ADC module on, VDD=5V | 87 | |
| ADC conversion current (ADC on, VDD=3.3V) | IADC2 | 1.8 | 2 | mA | ADC module on, VDD=3.3V | 87 | |
| ADC conversion time 1 | TADC1 | 1 | 7.5 | μs | ADC Clock = 2.67MHz, ADC sampling period = 6 | 87 | |
| ADC conversion time 2 | TADC2 | 15 | μs | ADC Clock = 1.33MHz, ADC sampling period = 6 | 87 | ||
| Comparator input voltage range | VCM | 0 | V | VDD=5V, TA=25℃ | 87 | ||
| Comparator offset voltage | VOS | 10 | 30 | mV | VDD=5V, TA=25℃ | 87 | |
| Comparator hysteresis voltage | VHYS | 25 | mV | VDD=5V, TA=25℃ | 87 | ||
| Comparator conversion current | ICMP | 100 | μA | VDD=5V | 87 | ||
| Comparator response time | TCMP | 2 | μs | VDD=5V, TA=25℃ | 87 | ||
| Power-on reset time | TPOR | 5 | 10 | ms | 86 | ||
| Power-down mode wake-up time | TPDW | 1 | 1.5 | ms | 86 | ||
| Reset pulse width | Treset | 18 | μs | low level active | 86 | ||
| RC oscillator frequency stability | fosc | 15.84 | 16 | 16.16 | MHz | VDD=4.5 |
86 |
| External 32k oscillator start-up time | Tosc | 1 | s | external 32k crystal | 86 | ||
| Pull-up resistor | RPH1 | 30 | k | VDD=5V | 85 | ||
| Pull-up resistor | RPH1 | 55 | k | VDD=3.3V | 86 | ||
| ADC input resistance | RAIN | 1 | M | VIN=5V | 87 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PBT | BTM Base timer BTMIF EBTM IPBTM 004BH 10 9 H/W Auto 能 | 33 |
CAD (KiCad official)
- Symbol:
SC92F7547P48R - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
sc92f7547p48r-etched.step/sc92f7547p48r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc92f7547p48r.step/sc92f7547p48r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (94 pp, sha256
41ba6ea021daec79, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).